DSLRKIT MID6P2UE Passive PoE Injector Switch
Support EXTEND mode, max Network Cable length to 250 meters
Power supply not included
Supports 12~57V DC power supply
(Maximum current 4 amps)
DC IN port 5.5X2.1mm, inside positive (+) outside negative (-)
8 Ports (2Uplink, 6 PoE) 10/100Mbps
Midspan Mode-B Unsolicited Power(4,5+/7,8-)
Wall Mount
NOTE. When EXT mode enable, the Max bandwidth for the Power Link (PoE) port 1-4 network port will be reduced to 10Mbps for each one. Please check your IP CAMERA's bit stream setting. We recommend the value does not over 8Mbps(8192Kbps).
(The up-link is not affected, it will always working at 100Mbps max speed)
52V Power adapter links:
52V1.85A http://www.ebay.com/itm/201863649634
52V2.7A http://www.ebay.com/itm/192137824001
48V Power adapter links:
48V2A http://www.ebay.com/itm/191880113415
48V3A http://www.ebay.com/itm/201384084416
This item do not include the power adapter, you need to buy an extra power adapter according to your requirement. So it only suitable for PoE professional customers.
802.3af/802.3at(PoE+) PoE device, We suggest DC 48Vor52V power adapter.
UBNT 24V POE device, We suggest DC24V power adapter.
If your camera is with word “12V/PoE” as this picture shows, then please select 48V(or 52V) Power Adapter, do not select 12V Power Adapter.
Because "12V/PoE" means it can offer power supply to camera via 12V DC port or 48V PoE Ethernet port:
This is an Passive Power Over Ethernet of 8 port 10 / 100Mbps-T Ethernet switches, including 6 unsolicited PoE Ethernet ports and 2 Uplink ports. DC port apply 12~55V power supply adapter(not included), any one of the 6 port can provide output power, each Ethernet port can provide network transmission speeds of up to 10 / 100Mbps , with Cat5 / 5e / 6 network cable.
This POE switch only support 10/100M connection, PoE ports do not support Gigabit ethernet connection, because "1~6" port using 4,5,7,8 pin as power transfer, Please do not connect any "NONE PoE gigabit ethernet device and Uplink device" on "1~6" port, this will damage your device.
Gigabit(10/100/1000Mbps) ethernet device Please do not access "Power Link port" this will damage your device.
Features:
- 8 x 10/100Mbps Auto-negotiation Fast Ethernet RJ-45 ports with 6-Ports PoE function
- Support EXT mode, max Network Cable length to 250 meters.
- Midspan Mode-B Unsolicited Power(4,5+/7,8-)
- Supports 12~57V DC power supply
- Each port supports auto MDI/MDIX, so there is no need to use cross-over cables.
- Full/half duplex transfer mode for each port.
Specification:
| ALL Port: | Standard 10/100Mbps Ethernet port. Support 10Mbps Ethernet and 100Mbps Fast Ethernet, can operate in full-duplex or half-duplex mode,must work with 4 pairs UTP Cat5/5e/6 cable。 | |||||
| Power Link Port 1-6: | any supported unsolicited power on pairs 45-78 pins compliant Powered Devices (PDs) | |||||
| Power LED | LED ON: power on. LED OUT: power off | |||||
| Green Light LINK/ACT | LED ON Indicates the port is connected to a network device and has been started | |||||
| LED OFF Indicates that this port is not connected to a network device or has not been started | ||||||
|
Standard
|
IEEE 802.3 10BASE-T Ethernet |
|
IEEE 802.3u 100BASE-TX Fast Ethernet |
|
|
IEEE 802.3x Full-Duplex flow control |
|
|
Protocol |
CSMA/CD Ethernet |
|
Data Transfer Rate |
Ethernet: 10Mbps (Half Duplex) 20Mbps (Full Duplex) |
|
Fast Ethernet: 100Mbps (Half Duplex) 200Mbps (Full Duplex) |
|
|
|
|
|
Network Media(Cable) |
10Base-T(EXTEND mode): UTP category 5e, 6 cable (maximum 250m) EIA/TIA-568 100Ω STP (maximum 250m) |
|
100Base-TX:UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) |
|
|
PoE Power on RJ45 |
Power +: pin 4 & pin 5 ; Power -: pin 7 & pin 8 |
|
DC Output: 9-55V, Per port Max 1A, |
|
|
Number of Ports |
8 x 10/100Mbps Auto-Negotiation RJ45 ports with 6 PoE enabled (port-1 ~ port-6) |
|
Power Input |
Supports INPUT 12-57V DC power supply |
|
Power DC port 5.5 x 2.1mm, |
|
|
Power Consumption |
3.2 Watts (max. no PD connected) |
|
According to the actual power consumption of equipment |
|
|
Temperature |
Operation Temperature:0 ~40℃ (32 ~104℉) |
|
Storage Temperature: -40 ~70℃(-40 ~158℉) |
|
|
Humidity |
Storage Humidity 5%~90% non-condensing, Operating Humidity 10%~90% non-condensing |
|
Product Dimensions |
140mm W x 65mm D x 28mm H |
|
RAM Register Capacity |
64K bytes per device |
|
MAC Address List |
1K entries per device |
|
Frame Forward Rate |
10Mbps Ethernet: 14880pps/Port 100Mbps Ethernet: 14880pps/Port |
Item Included:
DSLRKIT MID6P2UE 8pots 6PoE Unsolicited(Passive) PoE switch x1
(Power supply not included)
12 Months Warranty from the date of purchase.