Description
A true Custom touch for your prized Telecaster without any modification.
Get the TONE you love and the Maximum Clearance you Desire.
New Genuine Fender®
Telecaster® / Esquire® Vintage Type "Pat.Pend." Bridge Plate that is Drilled for “Top Load” with Double Long Notched Flanges and a set of Custom Fitted "Angle Compensated" Solid Brass Saddles.
This is a Standard Fender 50's Style Chrome Bridge Plate that fits all Vintage & Classic 50’s, 60's, 70's, 80's and on up to current Reissues, MIM, CIJ, MIK, MIJ, Squier Classic Vibe’s, Highway One's, Deluxe Nashville’s, Classic Player Baja’s and the new American Special, with (4) mounting screw holes and "Strings thru Body". NOTE: Does not fit the American Standard or American Deluxe. The Screw Spread Dimension is 2-9/16" center to center to the (2) outer-most holes. The String Spread Dimension is the Standard 2-1/8 inches "E" to "E".
The Bridge Plate is modified by "Long Notching" the Flanges for Maximum picking clearance near the Bridge Pickup. This Mod eliminates the parts of the Vintage Style Telecaster® Bridge that you've been catching your pick on, or banging your knuckles on. The Notched-Areas are then polished smooth to match the rest of the bridge plate before the bridge is assembled.
The Bridge Plate has also been modified by drilling (6) additional String holes in the rear Flange, so the Plate can be used as a Top Loading Plate as on a '59 Model Telecaster.
The low cutaway sides allow you to position your pick right up close to the saddles with ease.
I then add a set of Custom Fitted 3-pc. "Angle Compensated" Premium Smooth Brass Saddles. These Saddles have the intonation screw drilled at a slight angle. They allow proper intonation of your Tele's® vintage style three saddle bridge by angling the saddles and establishing the proper string length on all six strings. This is not possible with a stock set of "Straight" Saddles because most often you would need to adjust the saddle to a point halfway between the two perfect settings for each of the strings on that saddle. With the "Angle Compensated" Saddles, that Compromise is minimized or not necessary at all. The center saddle of this set is then Custom Ground so the string elevations can match your Fretboard Radius and the proper angle is ground on the ends so these saddles fit beside each other better with minimal interference. These saddles offer a True Vintage Look and Sound with the appeal of Dramatically improved intonation.
"If you like the tone of the great Tele® pickers like Danny Gatton and Roy Buchanan, you need a three-way bridge. Nothing else matches the sustain and tone achieved, as when the multiplied forces of two strings per saddle are applied."
Mounting screws are not included. An instruction sheet on how to set intonation is included in the package.
I get so many requests to add (2) extra mounting holes to the “Front” end of the Bridge. This is an option that you can add to your Bridge or Bridge Plate at the time of ordering by purchasing that option in my ebay store.
Look In My Ebay Store to find More Great Items for Your Telecaster!
We love to give big discounts for combined S&H! We will combine shipping for all your purchases! You can email us, in advance, for a quote on S&H prior to purchase.
TELE®, ESQUIRE®, TELECASTER®, and FENDER® are registered trademarks of Fender Musical Instruments Corp. (FMIC).
Get the TONE you love and the Maximum Clearance you Desire.
New Genuine Fender®
Telecaster® / Esquire® Vintage Type "Pat.Pend." Bridge Plate that is Drilled for “Top Load” with Double Long Notched Flanges and a set of Custom Fitted "Angle Compensated" Solid Brass Saddles.
This is a Standard Fender 50's Style Chrome Bridge Plate that fits all Vintage & Classic 50’s, 60's, 70's, 80's and on up to current Reissues, MIM, CIJ, MIK, MIJ, Squier Classic Vibe’s, Highway One's, Deluxe Nashville’s, Classic Player Baja’s and the new American Special, with (4) mounting screw holes and "Strings thru Body". NOTE: Does not fit the American Standard or American Deluxe. The Screw Spread Dimension is 2-9/16" center to center to the (2) outer-most holes. The String Spread Dimension is the Standard 2-1/8 inches "E" to "E".
The Bridge Plate is modified by "Long Notching" the Flanges for Maximum picking clearance near the Bridge Pickup. This Mod eliminates the parts of the Vintage Style Telecaster® Bridge that you've been catching your pick on, or banging your knuckles on. The Notched-Areas are then polished smooth to match the rest of the bridge plate before the bridge is assembled.
The Bridge Plate has also been modified by drilling (6) additional String holes in the rear Flange, so the Plate can be used as a Top Loading Plate as on a '59 Model Telecaster.
The low cutaway sides allow you to position your pick right up close to the saddles with ease.
I then add a set of Custom Fitted 3-pc. "Angle Compensated" Premium Smooth Brass Saddles. These Saddles have the intonation screw drilled at a slight angle. They allow proper intonation of your Tele's® vintage style three saddle bridge by angling the saddles and establishing the proper string length on all six strings. This is not possible with a stock set of "Straight" Saddles because most often you would need to adjust the saddle to a point halfway between the two perfect settings for each of the strings on that saddle. With the "Angle Compensated" Saddles, that Compromise is minimized or not necessary at all. The center saddle of this set is then Custom Ground so the string elevations can match your Fretboard Radius and the proper angle is ground on the ends so these saddles fit beside each other better with minimal interference. These saddles offer a True Vintage Look and Sound with the appeal of Dramatically improved intonation.
"If you like the tone of the great Tele® pickers like Danny Gatton and Roy Buchanan, you need a three-way bridge. Nothing else matches the sustain and tone achieved, as when the multiplied forces of two strings per saddle are applied."
Mounting screws are not included. An instruction sheet on how to set intonation is included in the package.
I get so many requests to add (2) extra mounting holes to the “Front” end of the Bridge. This is an option that you can add to your Bridge or Bridge Plate at the time of ordering by purchasing that option in my ebay store.
Look In My Ebay Store to find More Great Items for Your Telecaster!
We love to give big discounts for combined S&H! We will combine shipping for all your purchases! You can email us, in advance, for a quote on S&H prior to purchase.
TELE®, ESQUIRE®, TELECASTER®, and FENDER® are registered trademarks of Fender Musical Instruments Corp. (FMIC).
Click images to enlarge
