1 set of replacement filters with following :
1 x 5 Micron Polypropylene Sediment Filter
Three-layers structure cartridge, High contaminant holding capacity.
100% PP Polypropylene for compatibility with a wide range of process fluids.
5 Micron , Micro-Denier™ melt-blown filtration fiber, high removal ratings.
Formed by thermal bond without use of any binders and adhesives.
Maximum Operating Pressure: 125 PSI
Operating Temperature Range: 40-100°F
Dimensions: 20 inch x 2.5 inch
Maximum Flow Capacity: 1 - 20* GPM
1 x GAC UDF Coconut Shell Carbon Filter
GAC 20 inch Coconut shell Carbon Filter - Size 2.5 inch x 19 7/8 inch
Remove chlorine, turbidity, bad taste & odors, sediment, dirt, and THMS from water.
Thick Wall Coconut Base Carbon Filter Media // 100% coconut shell carbon Designed For maximum contact between the water and carbon.
5 Micron Nominal filter membrane included to prevent carbon fines to pass from the filter to your drinking water.
Operational Temperature Range: 40°F to 125°F
Low pressure drop across filter stage.
1 x Cation Resin Filter Cartridge
Filter Media: Cation Resin
Capacity : 2080 grains or 35,600 ppm
Inner Diameter: 30mm
Outer Diameter: 70mm
Size 2.5 inch x 19 7/8 inch Fits most standard 20 inch size housings and most reverse osmosis systems.
Reduces of TDS or hardness as required, or can be used as a pre-filter to prevent build-up of scale on sensitive equipment.
Maximum Recommended Flow: 2.5 to 5 GPM ( depends on the incoming water pressure)
Operation Temperature 40°F to 100°F (Maximum Temperature)
Maximum pressure: 125 PSI (8.6 bar)
Minimum pressure: 20 PSI (1.4 bar)
Micron rating: 5 nominal
End Caps: Polypropylene
Inner/Outer Wraps: Polyolefin
Netting: Polyethylene
Total 3 filters, each individually wrapped.