1/4" DIAMOND DRAG ENGRAVING TOOL WITH 60° TIP

This is a brand new RDZ Diamond Engraver spring loaded drag engraving tool with a 60 degree diamond tip. (See the diagram to show the actual angle of the tool) Many people are confused by what angle you are actually getting. I drew the sketch to help clarify the tool. It can be used on any engraving machine that has a 1/4" collet.  

With this type of tool you are able to do very detailed engravings on uneven surfaces and the engraving remains even. The tool does not rotate so you do not need to run the spindle. These are perfect for engraving several types of material including brass, aluminum, fiber board, acrylic, and much more The 60 degree tool is not best to be used with Acrylic or plastic as the tip may break off. Please keep in mind that the 60 degree tool is very delicate and is not intended to make deep cuts. The tool has a precision ground 1/4" diameter stainless steel body with an 1/8" diamond bit that extends out by approximately 1/2", the overall length is approx. 2" & there is up to 3/8" travel. 

These are made in our own machine shop by skilled machinists & each one is inspected and tested before packaging. Don't be fooled by our low price, these are high quality tools made in the USA on CNC machines. If you have any questions please contact us before buying. Thanks for looking and Happy Engraving!

We also have replacement tips available.


Skeleton, Piranha, Laguna, Shark, 3020, 3040, 3060, Taig, Sherline, LXG0609, 2020, 2030, 2040, Oliver, Rising, Konmison, Sanvn, Gtsun, Sungoldpower,
 



SPARE ENGRAVING BITS

I could easily argue that a spare engraving bit is a must have. Not having a spare engraving bit is like driving a car without a spare tire - if you get a flat, you're in big trouble. Treat the need for a spare engraving bit the same way. If your engraving bit chips or gets dull, you'll be out of business until the manufacturer can get you a replacement. If you just can't afford a spare engraving bit when you purchase your new engraver, make it a goal to get one in as soon as possible. The cost is minimal compared to the down time.


IT IS VERY IMPORTANT TO NOTE THAT YOU SHOULD NOT RUN THE SPINDLE WHILE ENGRAVING.Our Engravingbit is in our opinion the best on the market based on feedback that we have received over the past 8 years.