1.1kw 240v Single Phase Electric Motor 1,5hp 2 pole 2800rpm 1 Phase Motor New

Electric Motor Specifications High Torque Twin Capacitors Fitted

Output KW 1.1 (HP 1.5)  
Poles 2 = Full Load Speed 28000RPM
Frame Size 80s 
Voltage Input 240V Single Phase
Frequency 50Hz   Full Load Current 7.02A
Format Capacitor start and run, High Torque, Capacitors Fitted in Top Aluminium Terminal Box
Load Torque Starting 3.69Nm
Current Noise Level 78dB 
Shaft Size 19mm x 40mm Long
Full Dimensions See Attached Picture Gallery
Weight 13.8 Kgs
Degree of Protection IP55
Ambient Temperature 40°C
High Quality SKF or NSK Bearings Fitted 
Performance According to IEC 60034 

Rotation of shaft can easily be changed by switching 2 links in terminal box.

All Motors have detachable Multi mount feet so can be easily removed and transferred to enable the terminal box with capacitors fitted to be located on either side or on top of motor as standard if you are restricted for height. 

Mounting Variations as below 
B3 Foot Mount Only. 
B35 Foot and Flanged Large Flange 
B34 Foot and Flanged with Small Flange with Internal Threaded Holes 

We also keep in stock Special flanges so example if you had a 2.2kw 1400rpm in a 100 frame with a b35 mount 250mm Diameter flange we can fit a 90b5 200mm flange to this motor if required.   

Installation
All electric motors should be installed by a qualified electrician and suitable overload protection fitted to prevent the motor from overload

Feedback 
Please don’t leave us negative feedback we are here to help and sometimes late deliveries etc. are out of our control, Please contact us with any issues and we will do our best to sort them as we are a trusted seller with many years’ experience and thrive on the product quality and support we offer and continue to offer. 


Trade Discounts Available Contact us in Advance