- Condition: 100% new
- Color:Black
- Material:ABS Plastic & Metal
- Camera Size: approx.4.6x2.1x2.3cm(1.8x0.8x0.9inch)(LxWxT)
- Camera line: approx.53cm(20.9inch)
- Distance between mounting holes : approx.2.8cm(1.1inch)
- Power Line: approx.97cm(38.2inch)
- Video Line: approx.590cm(232.3inch)
- Voltage: DC12V
- Current consumption: 150mA
- Image standard: NTSC 60HZ/PAL 50HZ
- Effective Pixel: 656x492
- Horizontal resolution: 480 TVL (Enhanced)
- Diagonal angle: 170 degree
- Horizontal angle: 110 /160 degree
- Lens angle: 120 /170 degree
- Minimum illumination: 0.5Lux/F1.2(Lux with LED)
- RCA video output: 1.0 Vpp / 75ohm
- Operating Temperature: -20- 80 degree Celsius, RH 95%MAX
- Storage temperature: -40-85 degree Celsius ,RH 95%MAX
- Waterproof: IP67
- Item included:
1 x CCD Car Rear View Camera
1 x 6M Video Line
1 x 1M Power Line
1 x Manual Instruction
2 x Screw
- Compatible With: fit for all car
This Is Aftermarket Replacement Item But Not Genuine
- Note:
1) All dimensions are measured by hand, there may be small deviations.
2) Adapt to 12V car electrical system, can not be installed on 24V electric car.
3)Please install and maintain the system when the power is off.
Product Dimension:
Feature:
1) Waterproof IP67 ABS housing, durable for long use.
2) Imported chips, image color high-definition, more realistic.
3) With 2 LED light modules, night view effect is very good, in a complete absence of light auxiliary reversing
4) 170 degree wide viewing angle, help to avoid incidents and accidents abrasion well.
5) CCD imaging sensor processing, night view effect is obvious.
6) Support NTSC or PAL Video System
7) Frog eye rear view reversing camera,small size won't draw any attention.
Installation:
1) 6M AV Line connected to the monitor, the red lines lead to the monitor trigger wire.
2) Connect the 1M power line to the camera power supply, the red leads to 12V reserve light(positive pole), the black leads to ground(negative pole).
