The A3 V2 Aeroplane gyro is the advanced version of the A3-L gyro with an integrated high precision 6-axis (3 gyro + 3 accelerators) MEMS sensor.
The main advantage of a six axis gyro is that it will provide smooth and stable flight in less than ideal flying conditions, AND it will also return your aircraft to upright, level flight at the flip of a switch (Auto-Recovery System).
It's like having a panic button should you lose orientation of your plane or find yourself unable to control your aircraft.
In addition to the advanced Auto-Recovery System, the A3 V2 also includes an Auto-Hover mode which will put your 3D capable aircraft into a perfect vertical hover at the flip of a switch.
Other features include a light-weight protective shell and remote master gain control.
The A3 supports both analogue and digital servos and provides separate gain adjustments for each flight mode.
All functions of the A3 are easy to setup via a simple on-board button and indicator LED.
If you are looking for a feature packed six axis gyro at an incredible value, look no further than the A3 V2.
Features:
Works with all major receiver brands including Spektrum, Futaba, Hitec, JR, Tactic, and more.
4 Pre-programmed flight Modes:
1. Normal Mode (2D Mode): this is the standard flight stabilisation mode found on most aeroplane gyros.
2. Auto-Recovery Mode (also called Auto Balance Mode): this mode will automatically "right" or balance your aircraft if you lose orientation or if the aircraft becomes inverted. This functionality is similar to Spektrum's SAFE technology.
3.Auto-Hover Mode: this mode will hold the aeroplane in a perfect hover (nose pointed towards the sky) on 3D capable aircraft.
4. Gyro Deactivated Mode: this turns the gyro off to allow unassisted / non-stabilised flight.
3 Wing Types: Normal Aeroplane, Flying-wing (Delta-wing) and V-tail.
One-key setting mode with coloured LED indicator light
Remote Master Gain
Supports 50Hz, 125Hz, and 250Hz Servo Frequencies
Separate gain adjustment for each flight mode
Automatic gyro calibration (auto stick centering) at start-up
High Voltage (7.4v) compatible
Futaba S.Bus and S.Bus 2 compatible
Easy to use, extremely well-suited to beginners.
Small, lightweight form-factor
Specifications:
Input Voltage: DC 5V-7.4V, powered from the receiver directly
Gyroscope: ±2000 dps, 1kHz
Servo Frequency: 50Hz/125Hz/250Hz
Servo Travel: 1520±500µs Limit 970-2070µs
Operating Temperature: -40c to 85c
Size: 43mm x 27mm
Weight: 11 g (excluding wires)
One-click Hover and Auto-hover
A new flight mode called Auto-hover was added to the new A3. When operating in this mode, the self-balance ability will be applied to both elevator and rudder. The plane can hold its hover attitude without any control except for the throttle.
After switching to auto-hover flight mode, you only need to control the throttle to maintain enough pulling force for the plane. This mode can be used to reduce the difficulty of hover practice.
Auto-Recovery / Auto-Balance Level Flight
The auto-balance mode is designed especially for beginners or FPV applications. When operating it in this mode, the controller will help the plane achieve level flight automatically. It can also be used to recover the plane from any other attitudes, or help to achieve a stable takeoff and landing.
Please Note:
Package includes User Manual