eBay

20 gram (30ml) Tin. Very pure, low friction ultra fine dry lubricant. Free first class post in the UK.

Micronised PTFE powder - highly refined powdered lubricant for many applications
Can be applied directly with a small brush to parts needing lasting lubrication
Often mixed with other greases to act as a fortifying, friction reducing additive
May be mixed with alcohol and painted on to components
Super low friction PTFE works over a wide temperature range -240C to +240C - practically inert
Many uses: 3D printers, robot arms, drones, robot mowers (lift sensors), cycling, motor racing, lubricating piano parts (knuckles), hinges, locks and other mechanisms
Protective - repels water, used to increase wear, abrasion and mar resistance

Certified high purity super refined PTFE (AKA Teflon) powder for a wide range of engineering, automotive and other lubrication applications.

Apply small amounts with a brush to piano knuckles, key bushings and rollers to reduce 'key weight' to improve feel and playability.

Apply to bearings, sliding surfaces and other moving parts on robots, 3D printers and automotive. Reduces noise and increase life span of gears etc.

Use directly or as an additive with greases or oils on skates cycles, chains etc.

May be mixed with melted paraffin candle wax for "hot waxing" cycle chains giving long lasting lubrication and protection - we suggest adding some MoS2 or even better WS2 too- please see our other listings

Hugely reduces static friction - coefficient of friction of around 0.04 - far slippier than graphite or talc - only beaten by WS2 (see our other listings)

Supplied in a screw top tin to keep dry clean and free from contamination.

Average particle size (APS or D50) of just 3 microns which is at the fine end of PTFE lubricant powder (any finer tends to clump and conglomerate)

MSDS on request - PTFE is essentially inert, but do not heat over 300 degrees, do not add to air rife pellets. Use of vinyl/latex gloves and a dust mask is advised.