300MM WIDE X 1600MM HIGH MATT BLACK STRAIGHT TOWEL RAIL PREFILLED RADIATOR HEATED FOR ELECTRIC USE ONLY

  • Fast Dispatch
  • High-Quality Matt Black Finish
  • Tested to BS EN 442 Standards
  • Made From Quality Mild Steel
  • 10 bar Pressure Tested
  • Wall Fixing Brackets Included

Measurements: 

Width: 300mm

Height: 1600mm

Projection From The Wall: 90-110mm


Details:

Heat Output Btu: 1994 BTU/h

Tube Layout: 4 + 6 + 7 + 10 = 30 Tubes Total

Finish: Matt Black

Design: Flat / Straight 

Material: Steel

Usage: Electric only

What's included in the box:

  • 4 x Adjustable Black brackets
  • 4 x Screws, rawl plugs and washers
  • 1 x Blanking and Bleeding Plug
  • 1 x Choice of Heating Element

 Note: GT and KTx3 models comes as chrome finish only

FAQ ABOUT ELECTRIC TOWEL RADIATORS

Does Element comes installed?
Unfortunately, we can not install the elements into the towel rail. This is because of the increased weight of the Pre-Filled towel rail radiator.

Can I Install The Element On Top Instead?
No, the element must be installed into the bottom of the towel rail radiator. Because heat rises, the element will overheat itself and may cause of fire. Also, towel rail will not heat as it should.

What is the difference between single heat and thermostatic elements?
Single heat elements have no control for the temperature. Can be just on or off and will not regulate the temperature of the towel rail radiator. However, can be wired into wall timers or wall controllers.

Thermostatic elements comes with built-in temperature control and it will regulate the towel rail radiator temperature according to your setting. Some models comes with 2 hours drying mode timer ( also used as booster ) or programmable built-in timer.  

Filled with Oil or Water?
We use Reverse Osmosis water ( also known as RO water ) in our Pre-Filled electric towel rail radiators. RO Water has no hard chemicals and will not cause any lime-scaling problems. Our filling mediums contains inhibitor + silencer and minimum 85% RO Water.

Can I Choose The Side Of The Element On Towel Rail?
We don't ship our electric towel rail with element installed on them. Elements can be installed into the left or right-hand side at the bottom of the towel rail.

If you need any further information please feel free to contact us via message.

300MM WIDE X 1600MM HIGH MATT BLACK STRAIGHT TOWEL RAIL PREFILLED RADIATOR HEATED FOR ELECTRIC USE ONLY

  • Fast Dispatch
  • High-Quality Matt Black Finish
  • Tested to BS EN 442 Standards
  • Made From Quality Mild Steel
  • 10 bar Pressure Tested
  • Wall Fixing Brackets Included

Measurements: 

Width: 300mm

Height: 1600mm

Projection From The Wall: 90-110mm


Details:

Heat Output Btu: 1994 BTU/h

Tube Layout: 4 + 6 + 7 + 10 = 30 Tubes Total

Finish: Matt Black

Design: Flat / Straight 

Material: Steel

Usage: Electric only

What's included in the box:

  • 4 x Adjustable Black brackets
  • 4 x Screws, rawl plugs and washers
  • 1 x Blanking and Bleeding Plug
  • 1 x Choice of Heating Element

 Note: GT and KTx3 models comes as chrome finish only

FAQ ABOUT ELECTRIC TOWEL RADIATORS

Does Element comes installed?
Unfortunately, we can not install the elements into the towel rail. This is because of the increased weight of the Pre-Filled towel rail radiator.

Can I Install The Element On Top Instead?
No, the element must be installed into the bottom of the towel rail radiator. Because heat rises, the element will overheat itself and may cause of fire. Also, towel rail will not heat as it should.

What is the difference between single heat and thermostatic elements?
Single heat elements have no control for the temperature. Can be just on or off and will not regulate the temperature of the towel rail radiator. However, can be wired into wall timers or wall controllers.

Thermostatic elements comes with built-in temperature control and it will regulate the towel rail radiator temperature according to your setting. Some models comes with 2 hours drying mode timer ( also used as booster ) or programmable built-in timer.  

Filled with Oil or Water?
We use Reverse Osmosis water ( also known as RO water ) in our Pre-Filled electric towel rail radiators. RO Water has no hard chemicals and will not cause any lime-scaling problems. Our filling mediums contains inhibitor + silencer and minimum 85% RO Water.

Can I Choose The Side Of The Element On Towel Rail?
We don't ship our electric towel rail with element installed on them. Elements can be installed into the left or right-hand side at the bottom of the towel rail.

If you need any further information please feel free to contact us via message.

300mm Wide 1600mm High Flat Black Pre-Filled Electric Heated Towel Rail Radiator

Product Description

300MM WIDE X 1600MM HIGH MATT BLACK STRAIGHT TOWEL RAIL PREFILLED RADIATOR HEATED FOR ELECTRIC USE ONLY

  • Fast Dispatch
  • High-Quality Matt Black Finish
  • Tested to BS EN 442 Standards
  • Made From Quality Mild Steel
  • 10 bar Pressure Tested
  • Wall Fixing Brackets Included

Measurements: 

Width: 300mm

Height: 1600mm

Projection From The Wall: 90-110mm


Details:

Heat Output Btu: 1994 BTU/h

Tube Layout: 4 + 6 + 7 + 10 = 30 Tubes Total

Finish: Matt Black

Design: Flat / Straight 

Material: Steel

Usage: Electric only

What's included in the box:

  • 4 x Adjustable Black brackets
  • 4 x Screws, rawl plugs and washers
  • 1 x Blanking and Bleeding Plug
  • 1 x Choice of Heating Element

 Note: GT and KTx3 models comes as chrome finish only

FAQ ABOUT ELECTRIC TOWEL RADIATORS

Does Element comes installed?
Unfortunately, we can not install the elements into the towel rail. This is because of the increased weight of the Pre-Filled towel rail radiator.

Can I Install The Element On Top Instead?
No, the element must be installed into the bottom of the towel rail radiator. Because heat rises, the element will overheat itself and may cause of fire. Also, towel rail will not heat as it should.

What is the difference between single heat and thermostatic elements?
Single heat elements have no control for the temperature. Can be just on or off and will not regulate the temperature of the towel rail radiator. However, can be wired into wall timers or wall controllers.

Thermostatic elements comes with built-in temperature control and it will regulate the towel rail radiator temperature according to your setting. Some models comes with 2 hours drying mode timer ( also used as booster ) or programmable built-in timer.  

Filled with Oil or Water?
We use Reverse Osmosis water ( also known as RO water ) in our Pre-Filled electric towel rail radiators. RO Water has no hard chemicals and will not cause any lime-scaling problems. Our filling mediums contains inhibitor + silencer and minimum 85% RO Water.

Can I Choose The Side Of The Element On Towel Rail?
We don't ship our electric towel rail with element installed on them. Elements can be installed into the left or right-hand side at the bottom of the towel rail.

If you need any further information please feel free to contact us via message.

Fast Shipping

We are proud with our fast dispatch. All orders placed and paid by 12:30 will be shipped within sameday. If you will need any further information for the delivery please feel free to contact us. If you will need any further information for the delivery please feel free to contact us.

We only accept PayPal on eBay, this means you can rest assured your order will be with you ASAP after your purchase. For your security we only despatch your order to the address you provide us via PayPal.

For Card Payments please contact us on our office. Our contact details as below in business contact details.

We Accept Payal

As soon as you pay, eBay & PayPal will email you to let you know it's been received and as soon as we've shipped your order, we'll let you know by email that it has been despatched and the tracking number if applicable.

We are proud with our fast dispatch. All orders placed and paid by 14:00 will be shipped within sameday. 

If you will need any further information for the delivery please feel free to contact us. 

"We want you to be 100% happy with your purchase and offer a 14 day "no quibble" guarantee"

If you change your mind, or the purchase is not suitable, you may notify us to cancel the contract within 14 days after the day of receipt of item(s) and you have a duty to take reasonable care of the item(s) until we receive the item(s) back. Return posting costs will be at your expense.

We will not accept returns if the item is used or not in its original unsused condition. All returns must be returned back in its original packaging.

If you will need any assistance on your return please contact us.

We will pay for the return cost if there is problem with your order on our side.

Can your heated towel rails be used on a standard central heating system?

Yes our heated towel rails can be connected up like a normal radiator and all have high heat outputs - meaning they not only warm your towels, but your whole bathroom too.

What is a BTU?

BTU stands for 'British Thermal Unit' which is the measurement of the amount of energy needed to cool or heat one pound of water by one degree. One BTU is equivalent to about 0.3 Watts.

How are your heat outputs calculated?

Our heat outputs are all independently tested using EN442 regulations. Unlike other retailers we give the true heat output rather than a fictitious figure. We recommend asking any retailer for the heat output certificate for a particular product.

Can this towel rail be converted to dual fuel?

Yes our heated towel rails can be run on two energy sources, meaning that you can have run the towel rail from your central heating in the winter and your electricity supply in the summer. - Warm towels all year round. (You can not convert Traditional/Victorian towel rails to dual fuel).

What do I need to make my towel rail dual fuel?

All you need is one of our dual fuel kits and you're ready to go, take a look at our shop

Can the Heated Towel Rail be used as electric only?

Heated towel rails can be used as electric only. The element is to be fitted, and then the towel rail filled with 85% water and 5% inhibitor, leaving a 10% gap at the top. If using as electric only (completely isolated), as long as the 25ml gap is left at the top there is no reason for it to overflow. The expansion and contracting is all done inside the radiator and can do so freely as long as there is a sufficient gap at the top of the towel rail. We do recommend that a qualified installer carries out the installation of your Electric Towel Rail.

What are the Electric Towel Rails filled with?

They are filled with a RO water Glycol solution – which is an anti-corrosive liquid.

Do I need straight or angled valves for my towel rail?

The type of valve you will require depends on the installation of your towel rail. If your pipework is coming up from the ground, then generally straight radiator valves are used. Whereas if your pipework is coming from the wall at an angle, angled valves would be used. If you are unsure on what valves you require then please contact us for more information. You can find our full range of valves available 

Do your towel rails come with a guarantee?

Yes! All of our towel rails come with a standard 10 Year 'Fit and Forget' Guarantee giving you the ultimate peace of mind.

Who should install the towel rail or radiator?

We recommend that any central heating towel rail or radiator is fitted by a qualified plumber/heating engineer, and any electrical items are installed by a qualified electrcian.

Template Created Using BOX-TEMPLATE
Ramazan%28companyblue%29+