HDR Freesync 2xHDMI+2xDP Mini Driver Board for 17.3inch 120Hz 1920x1080 LCD B173HAN01.2
Attention! For the same B173HAN01.1 and B173HAN01.2, there are 2 kinds of connector. ---One kind of connector is 30Pin. The LCD resolution is 60Hz. ---The other kind of connector is 40Pin. The LCD resolution is 120Hz. The buyer will have to confirm your own LCD's connector pin is 40Pin, not 30Pin before bidding this item. |
---Affected by the COVID-2019, the speed of parcel delivery from China to the buyer's country will be slower than in the past. ---Please make sure that your local logistics system is still operating normally. If your local transportation system has stopped, you cannot receive the package even if it arrives in your country. ----After the parcel reaches the buyer's country, the speed of delivery to the buyer will also be affected by the local epidemic. ---Please repeatedly contact the local shipping company with the tracking number after the item arrives in the buyer's country so that you can receive your package faster. |
---The power adapter for the board is DC+12V 3.0A~5.0A. ---12V DC Adapter(with 5.5x2.5 male connector. The plug of the power cord is American standard): https://www.ebay.com/itm/402243169332 |
---USB 3.0 to Displayport 4k adapter or HDMI-TO-DP adapter cannot be used as signal source for my this board+LCD. My this items cannot be fit for USB 3.0 to Displayport 4k adapter or HDMI-TO-DP adapter and it only can be connected to DP interface of the graphic card on the computer or notebook/laptop. ---The HDMI-TO-DP cable also cannot be used for this listing DP board+LCD. |
---Via HDMI cable connected to Raspberry Pi 3, the controller board+LCD works very well on the Raspberry Pi 3 with the following resolutions: 1920x1080 @ 50Hz and 3840x2160 @ 24Hz!
Content of the "config.txt" File on Raspberry:
--------------------------------
disable_overscan = 1
hdmi_force_hotplug = 1
hdmi_ignore_edid = 0xa5000080
hdmi_group = 2
hdmi_mode = 87
Hdmi_cvt = 3840 2160 24 3 0 0 0
framebuffer_width = 3840
framebuffer_height = 2160
max_framebuffer_width = 3840
max_framebuffer_height = 2160
hdmi_pixel_freq_limit = 400000000
gpu_mem = 256
# Uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
hdmi_drive = 2
# Enable audio (loads snd_bcm2835)
dtparam = audio = on
disable_camera_led = 1
start_x = 0
dtparam = i2c1 = on
. |
The 4K HDR Freesync controller board function description: | |||
1 | Power in (DC 12V: 5.5x2.5) | 6 |
Earphone out |
2 | HDMI in(to 3840x2160) | 7 | Keyboard |
3 | HDMI in(to 3840x2160) | 8 | Speaker out(2 X 10W(8Ω)) |
4 |
DP in | 9 | 4Lane HRB eDP out |
5 | DP in | 10 | |
Board size | LxWxH=118x75x10 mm | ||
The keyboard function description: | |||
1 | Exit/Select | 4 |
Menu |
2 | + | 5 | Power on/off |
3 | - | 6 |
LED(red/green) |
How to drive 3200x1800 or 3840x2160 4K LCD? |
---As far as I know, the graphic card has to be the 4th generation haswell/maxwell structure. ---The signal source can be from computer or laptop. ......The DP signal cable will be the standard DELL brand. The LCD will be blink if you use the normal DP cable. The normal DP cable cannot effectively prevent interference outside. ......If the DP interface of your graphic card is DP1.2 version, the signal will be DP1.2(3840x2160@60Hz). My driver board will also work at 3840x2160@60Hz ......If the HDMI/DVI interface of your graphic card is HDMI 1.2~1.4 version, the HDMI / DVI signal will be only HDMI 1.2(3840x2160@30Hz). In this case, my driver board only works at 3840X2160@30Hz, not 3840x2160@60Hz. If the HDMI/DVI is the latest HDMI 2.0 version, the singnal will be 3840x2160@60Hz and my driver board will work at 3840x2160@60Hz also via the HDMI/DVI cable. |
---The following intel graphic card(for laptop notebood and PC) can be used for my 4K driver board: ......HD4600 and above model |
---The following AMD graphic card(for laptop notebood and PC) can be used for my 4K driver board: ......AMD Radeon HD77** Series: HD7750 HD7770 HD7800 HD7900 HD7990 ......AMD Radeon R5 Series ......AMD Radeon R7 Series ......AMD Radeon R9 Series |
The following NVIDIA graphics card(for laptop / notebood and computer) can be used for my 4K driver board: ......GTX760 & GTX765M ......GTX770 & GTX770M ......GTX780 & GTX780M ......GTX800M 820M 830M 840M 850M 860M 870M 880M ......GTX910M 920M 920MX 930M 930MX 940MX 945M 950M 960M 965M 970M 980M and the related graphics card of computer ......GTX10XX series graphics card |
---The driver board cannot be turned on if the signal cable isn't connected to the working graghic card. |
|
Package includes: |
---1× HDR Freesync 2xHDMI+2xDP Mini Driver Board ---1× edp signal cable( from the board to the LCD) ---1× keyboard |