We are offering   DigitalMedia 8G+® Transmitter 201 

Product overview 

The DM-TX-201-C provides an interface for computers and high-definition AV sources as part of a complete Crestron® DigitalMedia™ system. Its low-profile, surface-mountable design makes it ideal for installation beneath a conference table, inside a lectern or equipment rack, or at virtually any other location in a boardroom, classroom, auditorium, or residence. It functions as a DM 8G+® transmitter and switcher, providing HDMI®, VGA, and analog audio inputs along with Ethernet and USB HID ports for a total connectivity solution. In addition to DM 8G+, it is also compatible with HDBaseT®, allowing it to be connected directly to the input of an HDBaseT certified display device. It connects to the head end or display location using a single CAT type twisted pair cable.[1]

Video   Switcher 2x1 auto-switching, auto-detecting multi-format digital/analog inputs; Crestron QuickSwitch HD technology   Input Signal Types HDMI (DVI & Dual-Mode DisplayPort compatible [2]), RGB/VGA (RGBHV, RGBS, RGsB); component (YPbPr); S-Video (Y/C); composite (NTSC, PAL) [3]   Output Signal Types DM 8G+ & HDBaseT, HDMI (DVI compatible [2])   Resolutions, HDMI, Progressive 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165 MHz pixel clock   Resolutions, HDMI, Interlaced 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165 MHz pixel clock   Resolutions, RGB 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1152@60Hz   Resolutions, Component[3] 480i, 576i, 480p, 576p, 720p50, 720p60, 1080p24, 1080i25 (1125 lines), 1080i30, 1080p30, 1080p50 (1125 lines), 1080p60   Resolutions, Composite & S-Video [3] 480i, 576i   Analog-To-Digital Conversion 10-bit 165 MHz per each of 3 channels Audio   Switcher 2x1 with auto-detecting digital/analog inputs and analog audio breakaway   Input Signal Types HDMI (Dual-Mode DisplayPort compatible [2]), analog stereo   Output Signal Types DM 8G+ & HDBaseT, HDMI   Digital Formats Dolby Digital®, Dolby Digital EX, DTS®, DTS-ES, DTS 96/24, LPCM up to 8 channels   Analog Formats Stereo 2-channel   Analog-To-Digital Conversion 24-bit 48 kHz   Analog Performance Frequency Response: 20 Hz to 20 kHz ±0.75 dB; S/N Ratio: >90 dB, 20 Hz to 20 kHz A-weighted; THD+N: <0.05% @ 1 kHz; Stereo Separation: >90 dB Communications   Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP   USB Supports signal extension of USB HID class devices, expandable to support virtually any USB 1.1 or 2.0 device using CrestronUSB-EXT-DM USB over Ethernet Extenders [6]; supports a TT-100 series cable caddy [7]   DigitalMedia DM 8G+, HDCP, EDID, CEC, PoDM, Ethernet   HDBaseT HDCP, EDID, PoE, Ethernet   HDMI HDCP, EDID, CEC   NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI devices and a control system Connectors   LAN (1) 8-pin RJ45 female, shielded; 10Base-T/100Base-TX Ethernet port   DM OUT (1) 8-pin RJ45 female, shielded; DM 8G+ output, HDBaseT compliant; PoDM PD port (HDBaseT PoE compatible) [4,5]; Connects to the DM 8G+ input of a DM switcher, receiver/room controller, or other DM device, or to an HDBaseT device, via CAT5e or Crestron DM-CBL-8G cable [1]   HDMI OUT (1) 19-pin Type A HDMI female; HDMI digital video/audio output (DVI compatible [2])   PWR 24VDC 0.75A (1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input; PW-24WU power pack included   Ground (1) 6-32 screw; Chassis ground lug   USB HID (1) USB Type B female; USB 2.0 device port for connection to the USB host interface of a computer or other USB HID-compliant host, or for connection of a Crestron TT-100 series device (Crestron Connect It) [7]   HDMI IN (1) 19-pin Type A HDMI female; HDMI digital video/audio input; (DVI & Dual-Mode DisplayPort compatible [2])   RGB IN (1) HD15 female; Analog VGA/RGB/video input; Signal Types: VGA, RGB, component, S-Video, or composite [3]; Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC, PAL; Input Levels: 0.5 to 1.5 Vp-p with built-in DC restoration; Input Impedance: 75 Ohms; Sync Input Type: Autodetect RGBHV, RGBS, RGsB, YPbPr; Sync Input Level: 3 to 5 Vp-p; Sync Input Impedance: 1k Ohms   AUDIO IN (1) 3.5 mm TRS mini phone jack; Unbalanced stereo line-level audio input; Input Level: 2 Vrms maximum; Input Impedance: 10k Ohms Controls & Indicators   LAN (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity   DM OUT (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence   PWR (1) Green LED, indicates operating power supplied via PoDM, HDBaseT PoE, or local power pack   HDMI IN (1) Green LED, indicates HDMI input is selected   RGB IN (1) Green LED, indicates RGB input is selected   SETUP (1) Red LED and (1) recessed pushbutton for Ethernet setup   RESET (1) Recessed pushbutton for hardware reset Power   Power Pack (included) Input: 100-240 Volts AC, 50/60 Hz; Output: 0.75 Amps @ 24 Volts DC; Model: PW-2407WU   Power over DM (PoDM) IEEE 802.3at Type 1 Class 3 (12.95 W) compliant PoDM PD (Powered Device), capable of being powered by a PoDM PSE (Power Sourcing Equipment) [4]   Power over HDBaseT IEEE 802.3at Type 1 Class 3 (12.95 W) compliant HDBaseT PoE PD (Powered Device), capable of being powered by an HDBaseT PoE PSE (Power Sourcing Equipment) [5] Environmental   Temperature 32° to 104° F (0° to 40° C)   Humidity 10% to 90% RH (non-condensing)   Heat Dissipation 30 BTU/hr Enclosure   Chassis Metal, black finish, with (2) integral mounting flanges, vented sides   Mounting Freestanding, surface mount, or attach to a single rack rail Dimensions   Height 6.47 in (165 mm)   Width 7.36 in (187 mm)   Depth 1.24 in (32 mm)