Product Description
HDMI+DVI+VGA+Audio Control Board for 17.3" 1920x1080 LCD Panel B173HW01 HSD173PUW1 LP173WF1 N173HGE-L11
---The power adapter for the board is DC+12V 3.0A~5.0A. ---12V DC Adapter(with 5.5x2.5 male connector. The plug of the power cord is American standard): https://www.ebay.com/itm/402243169332 |
---Programmer for upgrading the firmware of this controller board of LVDS LCD: https://www.ebay.com/itm/402265558558 |
The DIY kits Suitable for 17.3inch 1920x1080 LCD with LVDS signal type: | |||
B173HW01 V0~V5 | HSD173PUW1-A | LP173WF1-TLA1 TLA2 | N173HGE-L11 |
HSD173PUW1-A00 | LP173WF1-TLB1~TLB5 | N173HGE-L21 | |
HSD173PUW1-A01 | LP173WF1-TLC1 | ||
LP173WF1-TLD1 |
---The power for the board+LCD and the screen's voltage are 2 different parameters. ---Normally, the board works at DC+12V3.0A~8.0A. ---The screen's voltage only can be supplied by the board's jumper. Normally, there are 3 kinds of voltages for the LCD: +3.3V +5.0V +12.0V. The jumper has been set at +3.3V for this listing LCD. Please don't jump it again. Or else, LCD will be damaged at 5.0V/+12.0V . |
Kind Note: |
---The driver board can be worked with lots of lcd with different resolution after upgrading the firmware,such as: ......800 x480 ......800 x600 ......1024x768 ......1280x800 ......1280x1024 ......1366x768 ......1440x900 ......1600x900 ......1920x1080 ......1920x1200 ......up to 2048x1154@60Hz |
Package includes: |
---1× HDMI VGA DVI LCD Controller Board M.NT68676 ---1× Keyboard with Wire ---1× LVDS Cable |