1. Before copying, clear the test code copied during factory production by pressing and holding the remote control as shown in the figure. When the indicator light flashes, release one of the keys and press it three times in 5 seconds. The indicator light flashes and then releases, and then press any key separately. When the light is not lit, it indicates that the internal code has been cleared.

2. Press and hold the sub-machine to the copy of the key does not let go, press the corresponding button of the guest's sub-machine does not let go and close to the receiving antenna, after about three seconds, the local indicator light never shines - slow flash - after flashing You can let go, try again by pressing this button, the light will be on, indicating that the learning copy is successful. The same operation completes the copy of other keys.

3. Fixed frequency: 315MHz 330MHz 433MHz and customer demand frequency.

4. Recovery function: If you accidentally clear the zero, and press the two buttons as shown, the light flashes to indicate that the internal code has been restored.

1. Working voltage: CR2016(3V)

2. Operating current: ≤ 8mA

3. Frequency model: 433MHZ

4. The transmission power: ≤ 100mW

5. Emission distance: 50 to 100 m (proof)

6. The encoding type: self Copy

7. The working temperature: -10 ° C to +50 ° C

8.Copy chip remote:HS2260, HS2262, PT2262, PT2264, FP527, ZX527, SCL527, EV1527, HS1527, RT1530, HS2240, HS2242, PT2240, AX5026, AX5326, SMC918, SMC926, PLC008, PLC168, HT600, HT640, HT680, HT6010, HT6012, HT6014, HT6026, HT6207, SC5262

and partial rolling codes HCS101, HCS200, HCS201, HCS300, HCS301.

9.Uses: garage doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control products

1. One to one key copy

2. Each key password alone save

3. Can continuous repetitive copy use one million times

4. Privacy is strong