Product Description
HDMI+DVI+VGA+Audio Controller Board for 17.1" 1440x900 Screen LP171W01-A4 LP171WX2-A4K1 with 1-Lamp CCFL Backlight
---The power adapter for the board is DC+12V 3.0A~5.0A. ---12V DC Adapter(with 5.5x2.5 male connector. The plug of the power cord is American standard): https://www.ebay.com/itm/402243169332 |
---Programmer for upgrading the firmware of this controller board: https://www.ebay.com/itm/402265558558 |
The LCD's connector is Wire to Board type, pin pitch 1.0mm, 30Pin. The backlight connecotr is BHSR-02VS-1(Wire to Board type), pin pitch 3.5mm, total amount 1 pcs. |
|||
LP171W01-A4 | LP171WP4-TLA1 -TLA5 | LP171WX2-A4 -A4K1 -A4K2 -A4K3 -A4K5 -A4K6 -A4K7 -A4K8 | |
LP171W01-A4K1 -A4K2 -A4K3 | LP171WP4-TLB1 -TLB2 -TLB3 -TLB4 -TLB5 | LP171WX2-B4 | |
LP171WP4-TLN1 -TLN2 | LP171WX2-TLA1 -TLA2 -TLA3 -TLA5 | ||
LP171WP4-TLP1 -TLP2 | LP171WX2-TLB1 -TLB2 | ||
LP171WP4-TLQ1 -TLQ2 | |||
LP171WP4-TLR1 -TLR2 | |||
---The power for the board+LCD and the screen's voltage are 2 different parameters. ---Normally, the board works at DC+12V3.0A~8.0A. ---The screen's voltage only can be supplied by the board's jumper. Normally, there are 3 kinds of voltages for the LCD: +3.3V +5.0V +12.0V. The jumper has been set at +5V for this listing LCD. Please don't jump it again. Or else, LCD will be damaged at +5.0V/+12.0V . |
Kind Note: |
---The driver board can be worked with lots of lcd with different resolution after upgrading the firmware,such as: ......800 x480 ......800 x600 ......1024x768 ......1280x800 ......1280x1024 ......1366x768 ......1440x900 ......1600x900 ......1920x1080 ......1920x1200 ......up to 2048x1154@60Hz |
Package includes: |
|
---1× HDMI VGA DVI LCD Controller Board M.NT68676 ---1× Keyboard with Wire ---1× LVDS Cable(FI-XB30SR-HF11, pin pitch 1.0mm, pin amount 30pins) ---1× 1-Lamp CCFL Inverter Board |