M6 Titanium Cap Head Allen Bolt Ti-6Al-4V
Our race spec Titanium bolts are manufactured from only the best aircraft grade Titanium Alloy; Ti-6AL-4V (Grade5), our bolts are fully forged and the threads are created using a superior rolling process, this results in greater fatigue resistance and can reduce the potential of galling when fastening.
Grade 5 Titanium fasteners are suitable as replacement bolts for Grade 8.8 steel fasteners, they have a good strength to weight ratio and offer weight savings of approximately 45% over that of equivalent steel bolts. As well as the obvious weight savings, Titanium has outstanding corrosion resistance to a wide range of aggressive chemicals resulting in a longer service life over standard BZP steel bolts.
Please note that Ti fasteners are not suitable for applications that are spec'd for Steel bolts greater than ISO grade 8.8.
| Specification | Metric |
| Head Type | Cap Head |
| Material | Titanium Grade 5 also known as Ti-6AL-4V, Ti 6-4 |
| Manufacture | Fully Forged with Rolled Threads |
| Ultimate Tensile Strength | 150,000 PSI |
| Yield Strength | 120,000 PSI |
| Density | 4420 kg/m³ |
| Thread Pitch | 1.0 mm |
| Quantity | 1 Bolt |
Please note that it is recommended to apply anti seize or copper based paste to the bolt threads to prevent galling.
| Thread Size | M3 | M4 | M5 | M6 | M8 | M10 | M12 |
| Max Torque N m | 1.7 | 3.6 | 6.9 | 11.1 | 28.3 | 57.6 | 97.5 |
| Max Torque lb ft | 1.3 | 2.6 | 5.1 | 8.2 | 20.9 | 42.5 | 71.9 |
| L | d | b | dk | t | k | s |
| 16 | M6 | 16 | 10 | 4.5 | 6 | 5 |
| 20 | M6 | 20 | 10 | 4.5 | 6 | 5 |
| 25 | M6 | 25 | 10 | 4.5 | 6 | 5 |
| 30 | M6 | 25 | 10 | 4.5 | 6 | 5 |
| 35 | M6 | 25 | 10 | 4.5 | 6 | 5 |
| 40 | M6 | 25 | 10 | 4.5 | 6 | 5 |
| 45 | M6 | 25 | 10 | 4.5 | 6 | 5 |
| 50 | M6 | 25 | 10 | 4.5 | 6 | 5 |
| 60 | M6 | 25 | 10 | 4.5 | 6 | 5 |
- Please double check you are ordering the correct sizes prior to checkout.
- Do NOT use Ti bolts to substitute mild steel bolts above grade 8.8.