Ship from USA Warehouse fast shipping service to US Customers
〖US〗CNC Router Rotation 4th-Axis 100mm 4 Jaw Chuck Rotary Table & 65mm Tailstock for CNC Router Engraving Milling Machine
Package included:
- 1 x Rotary 4th Axis K12-100mm (with Nema23 stepper motor and 4 jaw chuck)
- 1 x MT2 65mm Tailstock
- 1Set of Anti-claw and wrench
100% Brand New and High Quality!
K12-100mm
About this item
- ♞【Rotation 4th Axis】Model:K12-100mm; Chuck Type:K12-100mm 4 Jaw Chuck;Inner through hole diameter/shaft hollow diameter is 22mm; with accessories:1 Set of Anti-claw and wrenches
- ♞【Stepper motor】Nema23 2-phase 3A stepper motor 57x57x76mm 4-lead wires: Red wire=A+;Green wire=A-;Yellow wire=B+;Blue wire=B- port.
- ♞【MT2 Tailstock】Center height: 65mm;Total height: 115mm 【Reducing ratio】6:1 (belt deceleration mode) ; Angle: 0.3 ° / step
- ♞【Advantages】Rust proof coating process,stable 4 jaw chuck structure,fine workmanship,solid and practical jaw, excellent process to maximize service life.
- ♞【Application】 The fourth axis can be used for three-dimensional processing of cylinders, bends and circles. The fourth axis engraving machine can be used for engraving spirals, scars, bamboo joints, etc.
Chuck type: K12 100mm 4 jaw centering chuck
Center height: 65mm
Total height: 115mm
Angle: 0.3°/ step
Gear box output shaft diameter: 25mm
Reducing ratio: 6:1(belt deceleration mode)
Stepper motor: Nema23 57mm 3A 2-phase 4 wire
Accessories: Set of Anti-claw and wrenches
Weight: 6.5KG
The fourth axis parameter settings:
Mach3 system settings: the pulses required for 1°
(Motor 1 lap pulses x Driver fine fraction x Reduction ratio) ÷ 360°
For example: 57mm 2- phase stepper motor, fine fraction of 16, reduction ratio 100:1
(200 x 16 x 100) / 360=888.88888888)
Weihong system settings: 1 pulse along the angle
360°/(Motor 1 lap pulses x Driver fine fraction x Reduction ratio)
For example: 57mm 2- phase stepper motor, fine fraction of 16, reduction ratio 100:1
360 / (200 x 16 x 100) =0.001125
Tailstock type:
Morse Taper 2 Live Center Movable MT2 Tailstock
- MT2 Tailstock
- Center Height: 65mm
- Stretch distance: 50mm
- Top tip: Activity type
- Axial locking wrench for tailstock
Stepper Motor:
Nema 23 stepper motor L76mm
Shaft Diameter: 8 mm
Shaft length: 25.5mm
Step Angle:1.8
Current: 3A
Voltage: 4.2V
Temperature Rise: 80 c max
Ambient Temperature: -20 c--+50 c
Phase No. : 2HP
Insulation Resistance: 100MOhm(500V DC)
Holding Torque: 18kg.cm
Wirings
- Stepper motor's red wire connect driver's A+ port
- Stepper motor's green wireconnect driver's A- port
- Stepper motor's yellow wireconnect driver's B+ port
- Stepper motor's blue wireconnect driver's B- port
Shipping
Please open the package and check if there are some damages before sign,if there are some damages,please do not sign and contact us immediately.
Problem&Feedback
Please give us the opportunityto resolve any problem when you have,we concern your problem and we will try our best to resolve it.
Pls contact us before you want to leave any negative feedback.
Refund
Any reason required for all refund. Item must be in it's original condition and no physical damage,buyer responsible for all shipping cost.
When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos.