Hantek 1008C 8CH Oscilloscope Digital Automotive Diagnostic DAQ Signal Generator
Features：
8 channels oscilloscope for vehicle testing. Over 80 types of automotive diagnostic function (Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.).
Video Help Function, provides the video help of diagnostic which can be watching online,
The diagnostic result can be generated diagnostic report., printed or taken screenshot by pushing one key, many methods to save the data.
Supported to record waveform for a long time. It can simulate camshaft and crankshaft signal.
Transmit signals through USB 2.0 interface plug and play, and no need extra power supply;
Vehicle Testing:
- First Diagnosis: Intake manifold vacuum & ignition, Petrol fumes adjusting valve vacuum & ignition, Idle exhaust ignition, Starting exhaust ignition.
- Ignition: primary and secondary.
- Sensor: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambda sensor, Throttle position.
- Bus Diagnosis: CAN bus data examine, CAN bus signal integrity, CAN bus LH long time acquisition, LIN bus.
- Performer: Petrol/Diesel.
- Starter and charging circuits.
Oscilloscope:
- 8 channels oscilloscope, 2.4MSa/s real time sampling rate.
- 12 bits vertical resolution, spectrum analysis function.
Programmable Generator:
- 8 channels programmable generator.
- Can analog signals of crankshaft, camshaft etc.
Others:
- USB 2.0 interface plug and play, and no need extra power supply;
- More than 20 types of automatic testing function, a similar interface with benchtop oscilloscope, easy to use;
- Software support: Windows 7, Windows 8，Windows 10
Specifications:
| Oscilloscope Mode | |
| Vertical System | |
| Analog Channel | 8 |
| Input Impedance | Resistance: 1MΩ |
| Input Sensitivity | 10mV/div to 5V/div |
| Input Coupling | DC |
| Resolution | 12 bits |
| Horizontal System | |
| Memory Depth | 4K |
| Max. Input | 400V (DC+AC Peak) |
| Real-Time Sampling Rate | 2.4MSa/s |
| Time Base Range | 1ns/div to 20000s/div(1-2-5sequences) |
| Time Base Precision | ±50ppm |
| Trigger System | |
| Time Base Range | 1ns/div to 20000s/div(1-2-5sequences) |
| Time Base Precision | ±50ppm |
| Trigger Source | CH1, CH2, CH3, CH4, CH5, CH6, CH7, CH8 |
| Trigger Mode | Edge |
| X-Y Mode | |
| X-Axis Input | CH1 |
| Y-Axis Input | CH2 |
| Cursors and Measurement | |
| Voltage Measurement | Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot |
| Time Measurement | Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle |
| Cursors Measurement | Horizontal ,Vertical, Track, Auto Measure Modes |
| Waveform Signal Process | +,- , x,÷, FFT, Invert |
| Voltage Range | 10mV to 5V/div @ x 1 probe 100mV to 50V/div @ x 10 probe 10V to 5000V/div @ x 1000 probe 100V to 50000V/div @ x 10000 probe 200mV to 100V/div @ 20:1 |
| Current Range | 100mA to50.0A/div @ CC65(20A) 1000mA to500.0A/div @ CC65(65A) 1A to100.0A/div @ CC650(60A) 1A to200.0A/div @CC1100(100A) 10A to2000.0A/div @CC1100(1100A) |
| FFT | Rectangular, Hanning, Hamming, Blackman Window |
| Math | Addition, subtraction, multiplication, division |
| Programmable Generator | |
| Channel | 8 |
| Output Level | LVTTL |
| Frequency Range | 0-250kHz |
| Interface | USB 2.0 |
| Power | No need extra power supply |
| General | |
| Size | 185 * 150 * 27mm / 7.3 * 5.9 * 1.06in |
| Weight | 319g / 11.28oz |
| Package Size | 23 * 17 * 7.5cm / 9.05 * 6.7 * 2.95in (L * W * H) |
| Package Weight | 915g / 32.29oz |
Package List:
1 * 1008C DAQ oscilloscope
8 * Crocodile probes/cable
1 * secondary ignition probe
1 * USB Cable
1 * CD
