All servers are Tested Running Linux Mint 19.1


No Hard Drives No Caddies No Blanks(Unless otherwise noted) They do have the Front Bezel but no Keys they are unlocked

Dell # listed Below are what is actual the Dell Support site might not represent exactly for someone before me has upgraded or it was Entered WRONG


Free Shipping to Lower Continental 48 States ONLY!If You are in HI or AK please contact first

If you have any Question$! Please contact I will work with you the best I can.
All Have the front Bezel but sorry no keys!

If you Purchase a Server and Want Caddies or Blanks You can Buy From Me and I will Half Price The Caddies and Blanks UPON SHIPMENT

Do some looking or KNOW which ones you NEED or WILL WORK
I can put them in before shipment
No Refunds for picking the wrong ones!

Dell # B9B1MN1 4 Bay DVD Rom Dual X5650 6 Core 2.66 GHz 12 GB Perc H700 Dual Gigabit Dual Power Supply iDrac6 Enterprise.


SOLD Dell # BL7ZNN1 4 Bay DVD Rom Single X5650 6 Core 2.66 GHz 12 GB Perc 6/i Dual Gigabit Dual Power Supply iDrac6

Dell # F81P4V1 4 Bay DVD RW Single X5675 6 Core 3.06 GHz 24 GB Perc H700 Dual Gigabit Dual Power iDrac6

Dell # GD32BP1 4 Bay w/2 Blanks DVD RW Single E5620 4 Core 2.4 GHz 6 GB Perc 6/i Dual Gigabit Dual Power Supply

Dell # GZZL3P1 4 Bay DVD Rom Single X5660 6 Core 2.8 GHz 6 GB Perc H700 Dual Gigabit Dual Power Supply iDrac6

Dell # HQ1TLM1 4 Bay w/ 1 Blank DVD Rom Single E5620 4 Core 2.4 GHz 4 GB Perc 6/i Dual Gigabit Dual Power Supply  iDrac6 (WIndows Server 08 Std 1-4 CPU 5 Client COA NO OS Installed)

Dell # HQ1VLM1 4 Bay w/ 1 Blank DVD Rom Single E5620 4 Core 2.4 GHz 4 GB Perc 6/i Dual Gigabit Dual Power Supply  iDrac6 (WIndows Server 08 Std 1-4 CPU 5 Client COA NO OS Installed)

SOLDDell # HWCXPS1 4 Bay w/ 2 Bay Covers DVD Rom Dual X5650 6 Core 2.66 GHz 24 GB SAS 6/i Dual Gigabit Dual Power Supply

Dell # HZZL3P1 4 Bay DVD Rom Single X5660 6 Core 2.8 GHz 6 GB Perc H700 Dual Gigabit Dual Power Supply iDrac6

Dell # 8SCQQL1 4 Bay DVD Rom Single X5560 4 Core 2.8 GHz 8 Gb Perc 6/i Dual Gigabit Dual Power Supply


The Following is Spec Out-Put from sudo inxi -F -m -s Report
-F, --full           Full output. Includes all Upper Case line letters except -W, plus -s and -n. Does not show extra verbose options
-m, --memory         Memory (RAM) data. Requires root. Numbers of devices (slots) supported and individual memory devices
                      (sticks of memory etc). For devices, shows device locator, size, speed, type (e.g. DDR3)
-s, --sensors        Sensors output (if sensors installed/configured): mobo/CPU/GPU temp; detected fan speeds. GPU temp only
                      for Fglrx/Nvidia drivers. Nvidia shows screen number for > 1 screen. IPMI sensors if present.

Dell # B9B1MN1
System: Host: mint Kernel: 5.4.0-26-generic x86_64 bits: 64 Desktop: Cinnamon 4.6.6 Distro: Linux Mint 20 Ulyana
Machine: Type: Server System: Dell product: PowerEdge R410 v: N/A serial: B9B1MN1
Mobo: Dell model: 01V648 v: A01 serial: ..CN13740091006H. UEFI: Dell v: 1.5.3 date: 10/22/2010
Memory: RAM: total: 11.70 GiB used: 1.14 GiB (9.7%)
Array-1: capacity: 128 GiB note: check slots: 8 EC: Multi-bit ECC
Device-1: DIMM_A1 size: 2 GiB speed: 1333 MT/s
Device-2: DIMM_A2 size: 2 GiB speed: 1333 MT/s
Device-3: DIMM_A3 size: 2 GiB speed: 1333 MT/s
Device-4: DIMM_A4 size: No Module Installed
Device-5: DIMM_B1 size: 2 GiB speed: 1333 MT/s
Device-6: DIMM_B2 size: 2 GiB speed: 1333 MT/s
Device-7: DIMM_B3 size: 2 GiB speed: 1333 MT/s
Device-8: DIMM_B4 size: No Module Installed
CPU: Topology: 2x 6-Core model: Intel Xeon X5650 bits: 64 type: MT MCP SMP L2 cache: 24.0 MiB
Speed: 1600 MHz min/max: N/A Core speeds (MHz): 1: 1600 2: 1596 3: 1596 4: 1596 5: 1596 6: 1596 7: 1595 8: 1596
9: 1596 10: 1596 11: 1597 12: 1596 13: 1596 14: 1596 15: 1596 16: 1596 17: 1596 18: 1596 19: 1597 20: 1596
21: 1597 22: 1596 23: 1597 24: 1596
Graphics: Device-1: Matrox Systems MGA G200eW WPCM450 driver: mgag200 v: kernel
Display: server: X.Org 1.20.8 driver: modesetting unloaded: fbdev,vesa resolution: 1024x768~75Hz
OpenGL: renderer: llvmpipe (LLVM 9.0.1 128 bits) v: 3.3 Mesa 20.0.4
Audio: Message: No Device data found.
Network: Device-1: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: 84:2b:2b:57:f4:7a
Device-2: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
IF: eno2 state: down mac: 84:2b:2b:57:f4:7b
Drives: Local Storage: total: 851.84 GiB used: 96.6 MiB (0.0%)
ID-1: /dev/sda vendor: Dell PowerEdge RAID Card model: PERC H700 size: 837.25 GiB
ID-2: /dev/sdb type: USB vendor: SanDisk model: Cruzer Glide size: 14.59 GiB
RAID: Hardware-1: Broadcom / LSI MegaRAID SAS 2108 [Liberator] driver: megaraid_sas
Partition: ID-1: / size: 5.85 GiB used: 52.3 MiB (0.9%) fs: overlay source: ERR-102
ID-2: /var/log size: 12.48 GiB used: 44.3 MiB (0.3%) fs: ext4 dev: /dev/sdb3
Sensors: System Temperatures: cpu: 32.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info: Processes: 401 Uptime: 3m Shell: bash inxi: 3.0.38

Dell # BL7ZNN1
mint@mint:~$ sudo inxi -F -m
System:    Host: mint Kernel: 4.15.0-20-generic x86_64 bits: 64 Desktop: Cinnamon 4.0.9 Distro: Linux Mint 19.1 Tessa
Machine:   Type: Server System: Dell product: PowerEdge R410 v: N/A serial: BL7ZNN1
           Mobo: Dell model: 01V648 v: A01 serial: ..CN137400A600P9. BIOS: Dell v: 1.5.3 date: 10/22/2010
Memory:    RAM: total: 11.71 GiB used: 1.14 GiB (9.8%)
           Array-1: capacity: 128 GiB slots: 8 EC: Multi-bit ECC
           Device-1: DIMM_A1 size: 4 GiB speed: 1333 MT/s
           Device-2: DIMM_A2 size: 4 GiB speed: 1333 MT/s
           Device-3: DIMM_A3 size: 4 GiB speed: 1333 MT/s
           Device-4: DIMM_A4 size: No Module Installed
           Device-5: DIMM_B1 size: No Module Installed
           Device-6: DIMM_B2 size: No Module Installed
           Device-7: DIMM_B3 size: No Module Installed
           Device-8: DIMM_B4 size: No Module Installed
CPU:       Topology: 2x 6-Core model: Intel Xeon X5650 bits: 64 type: MT MCP SMP L2 cache: 24.0 MiB
           Speed: 2743 MHz min/max: N/A Core speeds (MHz): 1: 2743 2: 2742 3: 2742 4: 2742 5: 2742 6: 2742 7: 2741 8: 2741
           9: 2741 10: 2741 11: 2741 12: 2741
Graphics:  Device-1: Matrox Systems MGA G200eW WPCM450 driver: mgag200 v: kernel
           Display: server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa resolution: 1280x800~60Hz
           OpenGL: renderer: llvmpipe (LLVM 7.0 128 bits) v: 3.3 Mesa 18.2.2
Audio:     Message: No Device data found.
Network:   Device-1: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
           IF: eno1 state: down mac: 84:2b:2b:63:21:fa
           Device-2: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
           IF: eno2 state: up speed: 1000 Mbps duplex: full mac: 84:2b:2b:63:21:fb
Drives:    Local Storage: total: 14.61 GiB used: 12.81 GiB (87.7%)
           ID-1: /dev/sda type: USB vendor: SanDisk model: Cruzer Glide size: 14.61 GiB
RAID:      Hardware-1: LSI Logic / Symbios Logic MegaRAID SAS 1078 driver: megaraid_sas
Partition: ID-1: / size: 7.66 GiB used: 2.98 GiB (39.0%) fs: overlay source: ERR-102
Sensors:   System Temperatures: cpu: 72.0 C mobo: N/A
           Fan Speeds (RPM): N/A
Info:      Processes: 268 Uptime: 1h 57m Shell: bash inxi: 3.0.27

Dell # F81P4V1

System:    Host: mint Kernel: 4.15.0-20-generic x86_64 bits: 64 Desktop: Cinnamon 4.0.8 Distro: Linux Mint 19.1 Tessa
Machine:   Type: Server System: Dell product: PowerEdge R410 v: N/A serial: F81P4V1
           Mobo: Dell model: 01V648 v: A06 serial: ..CN1374023V00FU. BIOS: Dell v: 1.9.0 date: 10/21/2011
Memory:    RAM: total: 23.53 GiB used: 1.24 GiB (5.3%)
           Array-1: capacity: 128 GiB slots: 8 EC: Multi-bit ECC
           Device-1: DIMM_A1 size: 8 GiB speed: 1333 MT/s
           Device-2: DIMM_A2 size: 8 GiB speed: 1333 MT/s
           Device-3: DIMM_A3 size: 8 GiB speed: 1333 MT/s
           Device-4: DIMM_A4 size: No Module Installed
           Device-5: DIMM_B1 size: No Module Installed
           Device-6: DIMM_B2 size: No Module Installed
           Device-7: DIMM_B3 size: No Module Installed
           Device-8: DIMM_B4 size: No Module Installed
CPU:       Topology: 2x 6-Core model: Intel Xeon X5675 bits: 64 type: MT MCP SMP L2 cache: 24.0 MiB
           Speed: 1596 MHz min/max: N/A Core speeds (MHz): 1: 1596 2: 1596 3: 1596 4: 1596 5: 1596 6: 1596 7: 1596 8: 1596
           9: 1596 10: 1596 11: 1596 12: 1596
Graphics:  Device-1: Matrox Systems MGA G200eW WPCM450 driver: mgag200 v: kernel
           Display: server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa resolution: 1280x1024~60Hz
           OpenGL: renderer: llvmpipe (LLVM 6.0 128 bits) v: 3.3 Mesa 18.0.5
Audio:     Message: No Device data found.
Network:   Device-1: Broadcom Limited NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
           IF: eno1 state: down mac: d4:ae:52:8f:f3:6f
           Device-2: Broadcom Limited NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
           IF: eno2 state: up speed: 1000 Mbps duplex: full mac: d4:ae:52:8f:f3:70
Drives:    Local Storage: total: 1.10 TiB used: 12.33 GiB (1.1%)
           ID-1: /dev/sda model: PERC H700 size: 558.38 GiB
           ID-2: /dev/sdb model: PERC H700 size: 558.38 GiB
           ID-3: /dev/sdc type: USB vendor: SanDisk model: Cruzer Glide size: 14.59 GiB
RAID:      Hardware-1: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] driver: megaraid_sas
Partition: ID-1: / size: 9.88 GiB used: 216.7 MiB (2.1%) fs: overlay source: ERR-102
Sensors:   System Temperatures: cpu: 37.0 C mobo: N/A
           Fan Speeds (RPM): N/A
Info:      Processes: 257 Uptime: 31m Shell: bash inxi: 3.0.27

Dell # GD32BP1
System:    Host: mint Kernel: 4.15.0-20-generic x86_64 bits: 64 Desktop: Cinnamon 4.0.10 Distro: Linux Mint 19.1 Tessa
Machine:   Type: Server System: Dell product: PowerEdge R410 v: N/A serial: GD32BP1
           Mobo: Dell model: 01V648 v: A02 serial: ..CN137400CP001W. BIOS: Dell v: 1.11.0 date: 07/20/2012
Memory:    RAM: total: 5.81 GiB used: 1.29 GiB (22.3%)
           Array-1: capacity: 128 GiB slots: 8 EC: Multi-bit ECC
           Device-1: DIMM_A1 size: 2 GiB speed: 1333 MT/s
           Device-2: DIMM_A2 size: 2 GiB speed: 1333 MT/s
           Device-3: DIMM_A3 size: 2 GiB speed: 1333 MT/s
           Device-4: DIMM_A4 size: No Module Installed
           Device-5: DIMM_B1 size: No Module Installed
           Device-6: DIMM_B2 size: No Module Installed
           Device-7: DIMM_B3 size: No Module Installed
           Device-8: DIMM_B4 size: No Module Installed
CPU:       Topology: 2x Quad Core model: Intel Xeon E5620 bits: 64 type: MT MCP SMP L2 cache: 24.0 MiB
           Speed: 2609 MHz min/max: N/A Core speeds (MHz): 1: 2609 2: 2586 3: 2602 4: 2557 5: 2537 6: 2602 7: 2652 8: 2388
Graphics:  Device-1: Matrox Systems MGA G200eW WPCM450 driver: mgag200 v: kernel
           Display: server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa resolution: 1280x1024~60Hz
           OpenGL: renderer: llvmpipe (LLVM 8.0 128 bits) v: 3.3 Mesa 19.0.8
Audio:     Message: No Device data found.
Network:   Device-1: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
           IF: eno1 state: down mac: 78:2b:cb:08:70:98
           Device-2: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
           IF: eno2 state: up speed: 1000 Mbps duplex: full mac: 78:2b:cb:08:70:99
Drives:    Local Storage: total: 433.21 GiB used: 18.70 GiB (4.3%)
           ID-1: /dev/sda type: USB vendor: SanDisk model: Cruzer Glide size: 14.59 GiB
           ID-2: /dev/sdb model: VIRTUAL DISK size: 418.62 GiB
Partition: ID-1: / size: 9.88 GiB used: 6.59 GiB (66.7%) fs: overlay source: ERR-102
Sensors:   System Temperatures: cpu: 44.0 C mobo: N/A
           Fan Speeds (RPM): N/A
Info:      Processes: 243 Uptime: 34m Shell: bash inxi: 3.0.27

Dell # GZZL3P1

mint@mint:~$ sudo inxi -F -m
System:    Host: mint Kernel: 4.15.0-20-generic x86_64 bits: 64 Desktop: Cinnamon 4.0.9 Distro: Linux Mint 19.1 Tessa
Machine:   Type: Server System: Dell product: PowerEdge R410 v: N/A serial: GZZL3P1
           Mobo: Dell model: 01V648 v: A01 serial: ..CN1374008P007E. BIOS: Dell v: 1.5.3 date: 10/22/2010
Memory:    RAM: total: 5.80 GiB used: 805.6 MiB (13.6%)
           Array-1: capacity: 128 GiB slots: 8 EC: Multi-bit ECC
           Device-1: DIMM_A1 size: 2 GiB speed: 1333 MT/s
           Device-2: DIMM_A2 size: 2 GiB speed: 1333 MT/s
           Device-3: DIMM_A3 size: 2 GiB speed: 1333 MT/s
           Device-4: DIMM_A4 size: No Module Installed
           Device-5: DIMM_B1 size: No Module Installed
           Device-6: DIMM_B2 size: No Module Installed
           Device-7: DIMM_B3 size: No Module Installed
           Device-8: DIMM_B4 size: No Module Installed
CPU:       Topology: 2x 6-Core model: Intel Xeon X5660 bits: 64 type: MT MCP SMP L2 cache: 24.0 MiB
           Speed: 2966 MHz min/max: N/A Core speeds (MHz): 1: 2966 2: 2966 3: 2966 4: 2966 5: 2966 6: 2965 7: 2965 8: 2965
           9: 2965 10: 2964 11: 2964 12: 2964
Graphics:  Device-1: Matrox Systems MGA G200eW WPCM450 driver: mgag200 v: kernel
           Display: server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa resolution: 1280x800~60Hz
           OpenGL: renderer: llvmpipe (LLVM 7.0 128 bits) v: 3.3 Mesa 18.2.2
Audio:     Message: No Device data found.
Network:   Device-1: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
           IF: eno1 state: down mac: 84:2b:2b:55:5f:19
           Device-2: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
           IF: eno2 state: up speed: 1000 Mbps duplex: full mac: 84:2b:2b:55:5f:1a
Drives:    Local Storage: total: 14.61 GiB used: 12.72 GiB (87.1%)
           ID-1: /dev/sda type: USB vendor: SanDisk model: Cruzer Glide size: 14.61 GiB
RAID:      Hardware-1: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] driver: megaraid_sas
Partition: ID-1: / size: 7.66 GiB used: 2.90 GiB (37.8%) fs: overlay source: ERR-102
Sensors:   System Temperatures: cpu: 70.0 C mobo: N/A
           Fan Speeds (RPM): N/A
Info:      Processes: 275 Uptime: 6h 03m Shell: bash inxi: 3.0.27


Dell # HQ1TLM1

System:    Host: mint Kernel: 4.15.0-20-generic x86_64 bits: 64 Desktop: Cinnamon 4.0.10 Distro: Linux Mint 19.1 Tessa
Machine:   Type: Server System: Dell product: PowerEdge R410 v: N/A serial: HQ1TLM1
           Mobo: Dell model: 0N83VF v: A03 serial: ..CN1374006P007B. BIOS: Dell v: 1.12.0 date: 07/30/2013
Memory:    RAM: total: 3.84 GiB used: 1.07 GiB (27.8%)
           Array-1: capacity: 128 GiB slots: 8 EC: Multi-bit ECC
           Device-1: DIMM_A1 size: 2 GiB speed: 1066 MT/s
           Device-2: DIMM_A2 size: 2 GiB speed: 1066 MT/s
           Device-3: DIMM_A3 size: No Module Installed
           Device-4: DIMM_A4 size: No Module Installed
           Device-5: DIMM_B1 size: No Module Installed
           Device-6: DIMM_B2 size: No Module Installed
           Device-7: DIMM_B3 size: No Module Installed
           Device-8: DIMM_B4 size: No Module Installed
CPU:       Topology: 2x Quad Core model: Intel Xeon E5620 bits: 64 type: MT MCP SMP L2 cache: 24.0 MiB
           Speed: 1596 MHz min/max: N/A Core speeds (MHz): 1: 1596 2: 1596 3: 1596 4: 1596 5: 1596 6: 1596 7: 1596 8: 1596
Graphics:  Device-1: Matrox Systems MGA G200eW WPCM450 driver: mgag200 v: kernel
           Display: server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa resolution: 1280x1024~60Hz
           OpenGL: renderer: llvmpipe (LLVM 8.0 128 bits) v: 3.3 Mesa 19.0.8
Audio:     Message: No Device data found.
Network:   Device-1: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
           IF: eno1 state: down mac: 84:2b:2b:19:03:3e
           Device-2: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
           IF: eno2 state: up speed: 1000 Mbps duplex: full mac: 84:2b:2b:19:03:3f
Drives:    Local Storage: total: 14.59 GiB used: 18.35 GiB (125.8%)
           ID-1: /dev/sda type: USB vendor: SanDisk model: Cruzer Glide size: 14.59 GiB
RAID:      Hardware-1: LSI Logic / Symbios Logic MegaRAID SAS 1078 driver: megaraid_sas
Partition: ID-1: / size: 9.88 GiB used: 6.24 GiB (63.2%) fs: overlay source: ERR-102
Sensors:   System Temperatures: cpu: 40.0 C mobo: N/A
           Fan Speeds (RPM): N/A
Info:      Processes: 237 Uptime: 17m Shell: bash inxi: 3.0.27

Dell # HQ1VLM1

System:    Host: mint Kernel: 4.15.0-20-generic x86_64 bits: 64 Desktop: Cinnamon 4.0.8 Distro: Linux Mint 19.1 Tessa
Machine:   Type: Server System: Dell product: PowerEdge R410 v: N/A serial: HQ1VLM1
           Mobo: Dell model: 0N83VF v: A03 serial: ..CN1374006P004B. BIOS: Dell v: 1.4.7 date: 05/25/2010
Memory:    RAM: total: 3.84 GiB used: 1.12 GiB (29.2%)
           Array-1: capacity: 128 GiB slots: 8 EC: Multi-bit ECC
           Device-1: DIMM_A1 size: 2 GiB speed: 1066 MT/s
           Device-2: DIMM_A2 size: 2 GiB speed: 1066 MT/s
           Device-3: DIMM_A3 size: No Module Installed
           Device-4: DIMM_A4 size: No Module Installed
           Device-5: DIMM_B1 size: No Module Installed
           Device-6: DIMM_B2 size: No Module Installed
           Device-7: DIMM_B3 size: No Module Installed
           Device-8: DIMM_B4 size: No Module Installed
CPU:       Topology: 2x Quad Core model: Intel Xeon E5620 bits: 64 type: MT MCP SMP L2 cache: 24.0 MiB
           Speed: 1595 MHz min/max: N/A Core speeds (MHz): 1: 1595 2: 1596 3: 1596 4: 1596 5: 1596 6: 1596 7: 1596 8: 1596
Graphics:  Device-1: Matrox Systems MGA G200eW WPCM450 driver: mgag200 v: kernel
           Display: server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa resolution: 1280x1024~60Hz
           OpenGL: renderer: llvmpipe (LLVM 6.0 128 bits) v: 3.3 Mesa 18.0.5
Audio:     Message: No Device data found.
Network:   Device-1: Broadcom Limited NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
           IF: eno1 state: down mac: 84:2b:2b:19:01:f2
           Device-2: Broadcom Limited NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
           IF: eno2 state: up speed: 1000 Mbps duplex: full mac: 84:2b:2b:19:01:f3
Drives:    Local Storage: total: 14.59 GiB used: 12.53 GiB (85.9%)
           ID-1: /dev/sda type: USB vendor: SanDisk model: Cruzer Glide size: 14.59 GiB
RAID:      Hardware-1: LSI Logic / Symbios Logic MegaRAID SAS 1078 driver: megaraid_sas
Partition: ID-1: / size: 9.88 GiB used: 423.6 MiB (4.2%) fs: overlay source: ERR-102
Sensors:   System Temperatures: cpu: 31.0 C mobo: N/A
           Fan Speeds (RPM): N/A
Info:      Processes: 262 Uptime: 12m Shell: bash inxi: 3.0.27

Dell # HWCXPS1

mint@mint:~$ sudo inxi -F -m
System:    Host: mint Kernel: 4.15.0-20-generic x86_64 bits: 64 Desktop: Cinnamon 4.0.9 Distro: Linux Mint 19.1 Tessa
Machine:   Type: Server System: Dell product: PowerEdge R410 v: N/A serial: HWCXPS1
           Mobo: Dell model: 01V648 v: A05 serial: ..CN137401CE00S7. BIOS: Dell v: 1.12.0 date: 07/30/2013
Memory:    RAM: total: 23.52 GiB used: 1.14 GiB (4.8%)
           Array-1: capacity: 128 GiB slots: 8 EC: Multi-bit ECC
           Device-1: DIMM_A1 size: 4 GiB speed: 1333 MT/s
           Device-2: DIMM_A2 size: 4 GiB speed: 1333 MT/s
           Device-3: DIMM_A3 size: 4 GiB speed: 1333 MT/s
           Device-4: DIMM_A4 size: No Module Installed
           Device-5: DIMM_B1 size: 4 GiB speed: 1333 MT/s
           Device-6: DIMM_B2 size: 4 GiB speed: 1333 MT/s
           Device-7: DIMM_B3 size: 4 GiB speed: 1333 MT/s
           Device-8: DIMM_B4 size: No Module Installed
CPU:       Topology: 2x 6-Core model: Intel Xeon X5650 bits: 64 type: MT MCP SMP L2 cache: 24.0 MiB
           Speed: 1596 MHz min/max: N/A Core speeds (MHz): 1: 1596 2: 1595 3: 1596 4: 1596 5: 1596 6: 1596 7: 1597 8: 1596
           9: 1596 10: 1596 11: 1596 12: 1596 13: 1596 14: 1596 15: 1596 16: 1596 17: 1596 18: 1601 19: 1596 20: 1596 21: 1596
           22: 1596 23: 1596 24: 1596
Graphics:  Device-1: Matrox Systems MGA G200eW WPCM450 driver: mgag200 v: kernel
           Display: server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa resolution: 1280x800~60Hz
           OpenGL: renderer: llvmpipe (LLVM 7.0 128 bits) v: 3.3 Mesa 18.2.2
Audio:     Message: No Device data found.
Network:   Device-1: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
           IF: eno1 state: down mac: d4:ae:52:6e:cc:64
           Device-2: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
           IF: eno2 state: up speed: 1000 Mbps duplex: full mac: d4:ae:52:6e:cc:65
Drives:    Local Storage: total: 14.61 GiB used: 12.83 GiB (87.8%)
           ID-1: /dev/sda type: USB vendor: SanDisk model: Cruzer Glide size: 14.61 GiB
Partition: ID-1: / size: 7.66 GiB used: 3.00 GiB (39.2%) fs: overlay source: ERR-102
Sensors:   System Temperatures: cpu: 36.0 C mobo: N/A
           Fan Speeds (RPM): N/A
Info:      Processes: 381 Uptime: 8h 30m Shell: bash inxi: 3.0.27

Dell # HZZL3P1

mint@mint:~$ sudo inxi -F -m
System:    Host: mint Kernel: 4.15.0-20-generic x86_64 bits: 64 Desktop: Cinnamon 4.0.9 Distro: Linux Mint 19.1 Tessa
Machine:   Type: Server System: Dell product: PowerEdge R410 v: N/A serial: H22L3P1
           Mobo: Dell model: 01V648 v: A09 serial: ..CN137401BD00RX. BIOS: Dell v: 1.11.0 date: 07/20/2012
Memory:    RAM: total: 5.81 GiB used: 783.7 MiB (13.2%)
           Array-1: capacity: 128 GiB slots: 8 EC: Multi-bit ECC
           Device-1: DIMM_A1 size: 2 GiB speed: 1333 MT/s
           Device-2: DIMM_A2 size: 2 GiB speed: 1333 MT/s
           Device-3: DIMM_A3 size: 2 GiB speed: 1333 MT/s
           Device-4: DIMM_A4 size: No Module Installed
           Device-5: DIMM_B1 size: No Module Installed
           Device-6: DIMM_B2 size: No Module Installed
           Device-7: DIMM_B3 size: No Module Installed
           Device-8: DIMM_B4 size: No Module Installed
CPU:       Topology: 2x 6-Core model: Intel Xeon X5660 bits: 64 type: MT MCP SMP L2 cache: 24.0 MiB
           Speed: 2825 MHz min/max: N/A Core speeds (MHz): 1: 2825 2: 2825 3: 2825 4: 2825 5: 2825 6: 2825 7: 2825 8: 2825
           9: 2825 10: 2825 11: 2825 12: 2825
Graphics:  Device-1: Matrox Systems MGA G200eW WPCM450 driver: mgag200 v: kernel
           Display: server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa resolution: 1280x800~60Hz
           OpenGL: renderer: llvmpipe (LLVM 7.0 128 bits) v: 3.3 Mesa 18.2.2
Audio:     Message: No Device data found.
Network:   Device-1: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
           IF: eno1 state: down mac: 78:2b:cb:77:7f:b6
           Device-2: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
           IF: eno2 state: up speed: 1000 Mbps duplex: full mac: 78:2b:cb:77:7f:b7
Drives:    Local Storage: total: 14.61 GiB used: 14.99 GiB (102.6%)
           ID-1: /dev/sda type: USB vendor: SanDisk model: Cruzer Glide size: 14.61 GiB
RAID:      Hardware-1: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] driver: megaraid_sas
Partition: ID-1: / size: 9.88 GiB used: 2.87 GiB (29.0%) fs: overlay source: ERR-102
Sensors:   System Temperatures: cpu: 76.0 C mobo: N/A
           Fan Speeds (RPM): N/A
Info:      Processes: 260 Uptime: 2h 06m Shell: bash inxi: 3.0.27

Dell # 8SCQQL1

mint@mint:~$ sudo inxi -F -m
System:    Host: mint Kernel: 4.15.0-20-generic x86_64 bits: 64 Desktop: Cinnamon 4.0.9 Distro: Linux Mint 19.1 Tessa
Machine:   Type: Server System: Dell product: PowerEdge R410 v: N/A serial: 8SCQQL1
           Mobo: Dell model: 0N051F v: A04 serial: ..CN137409CV003E. BIOS: Dell v: 1.6.3 date: 02/07/2011
Memory:    RAM: total: 7.78 GiB used: 1.01 GiB (13.0%)
           Array-1: capacity: 128 GiB slots: 8 EC: Multi-bit ECC
           Device-1: DIMM_A1 size: 2 GiB speed: 1333 MT/s
           Device-2: DIMM_A2 size: 2 GiB speed: 1333 MT/s
           Device-3: DIMM_A3 size: 2 GiB speed: 1333 MT/s
           Device-4: DIMM_A4 size: 2 GiB speed: 1333 MT/s
           Device-5: DIMM_B1 size: No Module Installed
           Device-6: DIMM_B2 size: No Module Installed
           Device-7: DIMM_B3 size: No Module Installed
           Device-8: DIMM_B4 size: No Module Installed
CPU:       Topology: 2x Quad Core model: Intel Xeon X5560 bits: 64 type: MT MCP SMP L2 cache: 16.0 MiB
           Speed: 2951 MHz min/max: N/A Core speeds (MHz): 1: 2951 2: 2951 3: 2951 4: 2951 5: 2951 6: 2952 7: 2952 8: 2952
Graphics:  Device-1: Matrox Systems MGA G200eW WPCM450 driver: mgag200 v: kernel
           Display: server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa resolution: 1280x800~60Hz
           OpenGL: renderer: llvmpipe (LLVM 7.0 128 bits) v: 3.3 Mesa 18.2.2
Audio:     Message: No Device data found.
Network:   Device-1: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
           IF: eno1 state: down mac: a4:ba:db:10:fb:31
           Device-2: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2
           IF: eno2 state: up speed: 1000 Mbps duplex: full mac: a4:ba:db:10:fb:32
Drives:    Local Storage: total: 14.61 GiB used: 12.72 GiB (87.1%)
           ID-1: /dev/sda type: USB vendor: SanDisk model: Cruzer Glide size: 14.61 GiB
RAID:      Hardware-1: LSI Logic / Symbios Logic MegaRAID SAS 1078 driver: megaraid_sas
Partition: ID-1: / size: 7.66 GiB used: 2.89 GiB (37.7%) fs: overlay source: ERR-102
Sensors:   System Temperatures: cpu: 83.0 C mobo: N/A
           Fan Speeds (RPM): N/A
Info:      Processes: 232 Uptime: 9h 10m Shell: bash inxi: 3.0.27