DSLRKIT ALL Gigabit 8Ports 48V PoE Switch(1Uplink, 7 PoE)

ALL Gigabit 10/100/1000Mbps

Passive PoE Injector Switch
Midspan Mode-B Unsolicited Power 48V(4,5+/7,8-)

Per port Max 38Watt(48V0.8A) 

Power Total Output 120Watt(48V 3A)

Compatible 802.3at 802.3af



 

This is an Passive Power Over Ethernet of 8 port 10/100/1000Mbps-T Ethernet switches, including 7 unsolicited PoE Ethernet ports and 1 Uplink ports. With an external 110V-240VAC to 48VDC power supply adapter, any one of the 7 port can provide output power, each Ethernet port can provide network transmission speeds of up to 10/100/1000Mbps , with Cat5 / 5e / 6 network cable.

Which compatible with IEEE 802.3af/at Mode-B(4,5+/7,8-) POE switch device, but it does NOT include the 802.3af/at compliant detection feature.  It supplies power NO MATTER WHAT, so don't plug the "POE 1~7" side into anything that isn't ready for it.

Compatible all 802.3af/at device as Wireless Access Point, IP Phone, IP camera, Gateway , Switch, or More.....
UnifiAP: UAP-AC-LR and UAP-AC-LITE not Supported.

Notice:
This switch uses POE Mode B and cannot be used on the PowerDevice (PD) Device which only supports POE Mode A. The two new UniFIAP(UAP-AC-LR and UAP-AC-Lite) are known, so it is easy to tell the difference. For example, in the specification of UAP-AC-LR, it is written "PoE Mode 802.3AF /A" to indicate that 802.3AF standard A Mode is only supported.
If you are the user of UAP-AC-LR and UAP-AC-LITE,please go to my store to buy another 24V Gigabit POE Switch.

Note:
If your camera is with word “12V/PoE” as this picture shows, then please select this 48V PoE Switch, do not select 12V PoE Switch. 
Because "12V/PoE" means it can offer power supply to camera via 12V DC port or 48V(or 52V) PoE Ethernet port.


Please do not connect any "NONE PoE gigabit ethernet device and Uplink device" on "PoE 1X~PoE 7X" port, this will damage your device..

NONE PoE gigabit ethernet device and Uplink device can only access "8x" port, Please do not access "PoE 1X~ PoE 7X", this will damage your device.

 

Features:

  • 8 x 10/100/1000Mbps Auto-negotiation Fast Ethernet RJ-45 ports with 7-Ports PoE function(port 1-port 7)
  • Midspan Mode-B Unsolicited Power 48V (4,5+/7,8-)
  • Switch Controller Chips Realtek RTL8370N
  • Per PoE port Maximum current: 0.84A
  • Supports PoE power up to 120W for all PoE ports, Per PoE port Max 38Watt(48V 0.84A)
  • Each port supports auto MDI/MDIX, so there is no need to use cross-over cables.
  • Full/half duplex transfer mode for each port.
  • Wire speed reception and transmission.
  • Up to 2K unicast address entities per device. Self-teaming, and table aging.
  • PoE power on RJ-45
    Power+ : pin 4 & pin 5; Power- : pin 7 & pin 8
  • AC to DC power supply
    Input: 100V~240VAC, 50Hz~60Hz. Output: 48VDC 3A
  • Power Consumption
    2.0 watts(max with no PD device connected)
    120watts(7 PoE ports Total Max. 120Watt)
  • Product Dimensions 200mm W x 95mm D x 30mm H
  • Temperature
    Operation Temperature:0 ~40℃ (32 ~104℉)
    Storage Temperature: -40 ~70℃(-40 ~158℉)
  • Humidity 
    Storage Humidity 5%~90% non-condensing, Operating Humidity 10%~90% non-condensing


Item Included:

  DSLRKIT DIM7P1UKG 8 Ports Gigabit Ethernet PoE switch x1
  AC Power Adapter(DC OutPut: 48V/3A) x1
  AC Power Cable x1