Logo
Logo
Logo
Logo
Logo

12v Compact Air Conditioning Unit with Front Mounted Controls.

Our most compact Air Conditioning unit is perfect for lightweight vehicles with small interior volumes, these units are compact yet powerful for their size.

A lightweight centrifugal fan is used to blow air through the air conditioning core and expel it through 2x directional open/close outlet nozzles. The fan has an onboard 3 speed resistor pack for fan control. The front panel incorporates 3 speed fan control switch and temperature control over the AC only..

Onboard electronic thermostat to prevent condensation from freezing and blocking the air conditioning core.

SpecificationMetricImperial & Other
Cooling Capacity3.8 kw12,970 BTU
Airflow280 m3/hr165 cfm
Weight2.9 kg6.38 lbs
High Pressure Connection5/8"-18 UNF-2B (3/8" SAE) O-Ring Male
Low Pressure Connection7/8"-18 UNS-2B (5/8" SAE) O-Ring Male
Noise Level60 dB (Max Fan Speed)
Voltage12v
Current Continuous11.25a
Power Consumption135w
Fan Speeds3 Speed
Enclosure ConstructionABS Plastic Enclosure
Heater & AC Core DesignCopper Tubes with Pressfit Aluminium Fins
Refrigerant CompatibilityR-12, R-22, R-134a, R-502, MP39, MP66, R404a, R1234yf
Part Number1B9-C2A-827
Kit Contents
QuantityItem
1xCompact Air Conditioning Unit 12v
2m10mm Drain Hose
1x10mm 'T' Piece
4xRight Angled BZP Steel Mounting Brackets
4xBolts & Serrated Washers
Wiring Information

Please wire up the AC unit as per the wiring diagram below, if you have any questions please don't hesitate to get in touch with us.

Condenser Fan: If you are mounting your condenser radiator in front of your engine radiator then you may use your existing electric engine radiator fan to cool the condenser when required. You simply need to 'T' into the trigger feed on the electric fan relay. If you are installing this into a classic car with a viscous fan then you will need an additional electric fan on the front of the condenser.

Wire ColourUse
Red WirePower
Black WireEarth
Purple WireCondenser Fan Relay & Pressure Switch
Compact Air Conditioning Wiring Diagram
Dimensions
Compact Air Conditioning Unit Dimensions
attention
ATTENTION
  • Please note that this unit does not have a heater core, please see our HVAC model for a combined Heat/AC unit.
  • This is not a complete kit, you will require a 4 Position Fan Switch, A/C ON/OFF Switch, a Condenser radiator, a Compressor, a Receiver/Dryer Bottle, Binary or Trinary Switch, Hoses etc.