8302 is a phase detection circuit module, using AD8302 chip, AD8302 is used for RF / IF amplitude and phase measurement of monolithic integrated circuits, mainly by the precision matching of two broadband logarithmic detector, a phase detector, the output An amplifier group, a bias unit, and an output reference voltage buffer. It can simultaneously measure the amplitude ratio and phase difference between the two input signals from the low frequency to the 2.7 GHz frequency range and can be applied to RF / IF power amplifiers Linear ratio measurement, RF power precision control, VSWR measurement and remote system monitoring and diagnosis.
(1) The amplitude ratio (gain) and phase difference of the two input signals can be measured in the low frequency to 2. 7 GHz frequency range;
(2) When measuring the gain, the dynamic range of the two input signals is ± 30dB, the sensitivity of the output level is 30mV / dB, the error is less than 0.5dB. The output voltage corresponding to -30 dB is 30 mV, and the output voltage corresponding to +30 dB is 1.8 V. The output current is 8mA, the conversion rate is 25V / μs;
(3) the precision amplitude measurement ratio of 30mV / dB;
(4) the exact typical value is less than 0.5 dB;
(5) the exact typical value is less than 1 °;
(6) the device in operation, with measurement, control and level comparison of three working methods;
(7) with 1.8V reference voltage bias output;
(8) video bandwidth response is 30M Hz;
(9) with 2. 7V ~ 5.5V single power supply work
1, the supply voltage: 5V DC (typical current value of 20mA);
2, the dynamic range of 60 dB (-60 dBm-0 dBm) amplitude measurement accuracy 0.5DB, phase measurement accuracy of 1 °;
3, with the measurement, control and level comparison of three working methods;
4, bandwidth: LF to 2.7GHz
Module A, B input: access to the input signal to be measured, the input signal range of -60 ~ 0dBm (50Ω system).
VMAG side: the amplitude ratio of two input signals, the formula is: VMAG = VSLP * log (VINA / VINB) + VCP, the exact amplitude of the scale factor of 30mV / dB, the center point of 900mV.
VPHS side: The phase ratio of the two input signals is calculated as follows: VPHS = VΦ [Φ (VINA) -Φ (VINB)] + VCP, the exact phase scale ratio is 10mV / degree and the center point is 900mV.
VREF: Enter the internally generated reference voltage, which is 1.8V
Connect the two signals to module A and B to measure the voltage of VMAG and VPHS. If VAMG voltage is greater than 900mV, the signal amplitude of input A is greater than that of input B, and VPHS is the same.
1. PayPal payment accepted only.
2. Items will be shipped to your eBay address. Please make sure it is correct.
3. Payment must be received 4 days after auction ended.
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response.
When you satisfied with our product and services please leave us positive feedback.
If a problem occurs, contact us immediately with any email request. Just contact us using the " Ask the seller a question" link on eBay.
On 02-Feb-21 at 03:40:27 GMT, seller added the following information:
On 02-Feb-21 at 03:42:14 GMT, seller added the following information: