Key Features: 
Made of Premium-grade raw materials
Ultrasonic welded hard wired leads
Staked cell construction 
Ultra-Thin cell separator 
Low-resistance, high-reliability, and consistency
High gauge wire with quality connectors
Long cycle life with 150 times minimum, up to 230Wh/kg energy density
Premium grade battery at low price!!!

Go further and faster with NHX Muscle Pack Lipo Batteries. Built for reliable and consistent performance, NHX Lipo Batteries offers a long cycle life with 150 times minimum, up to 230Wh/kg energy density, and low internal resistance (IR) for more stable voltage output throughout the entire duration of your battery. Our lithium polymer batteries are made of premium-grade raw materials and constructed with ultrasonic welding to reliably deliver consistent power when you need it the most. Each battery comes with high gauge wires with quality connectors to give you that pure burst and performance that you can count on. Our batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market! They are your ideal choices for the RC Cars, Trucks, Crawlers, Airplanes, Drones & Boats.

Specifications:
• Voltage Rating: 3S -11.1V
• Rated Capacity: 5000mAh
• Discharge Rating: 35C continuous
• Discharge Lead Connectors: 12AWG (150mm / 5.9 in Length ) Wires, EC3 Connector
• Balancing Connector: JST-XH with AB Clip
• Watt Hours: 55.5Wh

Dimensions:
• Length: 132mm (5.2 in.)
• Width: 42mm (1.68 in.) 
• Height: 28mm (1.1 in.)
• Weight: 334g (12 oz)

Charger Features:

NHX EZ6 Charger is an economic, high-quality 100-240V AC balance charger, designed for charging LiPo and LiFe batteries from 2-4 cells in balance mode. The circuit power is 30W and max charge current can reach to 3A. There are three kinds of charge current 1A/2A/3A that can be selected. You could select the proper charge current according to battery capacity.

There is one LED indicating the charger Statues (Ready to Charge/charging/charge finish). The operation of the charger is also very simple. There is a toggle switch in the charger which can be used to select charge current. After you power on the charger, select the charge current, connect the battery and charger, the charger will start working. 

Specifications:

AC Input Voltage: 100-240V, 50-60HZ
Output Power: 30W
Charging current (Selected by switch): 1A,2A,3A 
Current Drain for Balancing 200A
Battery Type: LiPo/LiFe
Battery cell count: 2-4 cells
1 Led for charging status
Dimension: 69.5*110*40.4mm
Weight: 175G

Charger Includes:

NHX EZ3 AC Charger
AC Power Cord
XT60 18AWG Wire Charging Cable
Deans 18AWG Wire Charging Cable
EC3 18AWG Wire Charging Cable
Tamiya 18AWG Wire Charging Cable
JST Wire Charging Cable
JR Receiver Wire Charging Cable