BLUE LASER DIODE M140 M-Type 5.6mm, , 445nm 1.8-2~ Watt power+GLASS LENS BLUE LASER 2 Watt output power* Main Features: Wavelength length:445nm Power Output: CW 2000mW Working Current: I<1300mA Working Voltage: 3.0V-5.0V Sealed Size: TO18(5.6mm) BY PURCHASING THIS YOU TAKE FULL RESPONSIBILITY FOR ITS FURTHER SAFE USAGE. safety first ALWAYS WEAR a REAL certified SAFETY GOGGLES/eye-ware! (*_*) below this text there is an image diagram, it should give you information you need, regarding size and polarity of this diode. Reverse polarity, excessive current, high heat will damage these. The diodes must be inserted in to a laser diode module with heat-sink before energizing to dissipate heat.A glass lens should also be used. (lens is supplied in the sealed packet along the diode) !WARNING! (below warning taken out from online forum article that was originally written by Dan Mills) ""Now a word about safety: 2W of laser is class 4 (in the old money) which means that both specular and diffuse reflections from surfaces are hazardous to vision (Never mind the direct beam). Bolt the thing down to an optical bench, and use appropriate ANSI certified eye safety gear (and shielding with interlocks so that a stray beam cannot blind anyone ELSE) and you are all good, but please, nearly nobody needs a handheld class 4 laser. Gear at this power is NOT a toy, no matter what some seem to think."" M140 M-Type or A -Type depending on the stock 5.6mm BLUE LASER DIODE 445nm 1.6-2 Watt power Wavelength length: 445nm Power Output:CW 2000mWWorking Current: I<1300mA Working Voltage: 3.0V-5.0V (Sealed Size: TO18)-(5.6mm) Semiconductor blue Laser diode + optic Glass lens for laser, multi coated. |