this signal adapter board mainly used to convert LVDS signals and analog audio signals into HDMI signals (including audio). The product can be used in the fields of set-top boxes, advertising machines, conference systems, etc. LVDS input requires standard VESA / JEIDA. DATA is not FIFO, Generally speaking, low-end solutions are not supported. If you cannot evaluate, you can contact our technician. Successful cases: Mstar MTK series V59 / 56 or above,Rockchip RK3288/RK3399/RK3218 series, Mstar series Android board, ARM board, X86 motherboard, etc.
This board has requirements for LVDS input. It must be based on the standard VESA standard resolution. low-end solutions controller board is not acceptable. It needs a motherboard with a V59 level or higher, Also need to confirm whether the interface definition is consistent. The resolution of the HDMI output of this adapter board is determined by the resolution of the LVDS output of the control board. This item does not change the LVDS signal of the control board
This item supports dual LCD display, LVDS interface is connected in parallel, so it supports one LVDS signal output and one HDMI output
Support up to 1920 * 1080 @ 60HZ
There are two types of LVDS input:
1ch 8bit : supports commonly used 1ch 6it/ 1ch 8bit resolution 480P/720p/768p/800P/960p in the market, etc.
2ch 8bit : supports commonly used resolutions of 1280*1024/1600*900/1920*1080 in the market, etc.
You need to choose one of the LVDS input when you buy , thanks
Disclaimer: All the functions, parameters, and services of the goods are limited to those written in the product introduction. The functions, parameters, and services that are not written are not supported or not provided. The store does not provide guarantees. The buyer bears the results.
Common FAQ:
Q1, the adapter board is connected to the LVDS signal, HDMI has no output , How to solve?
Answer:
A. Check whether the LVDS cable is connected correctly, and check the Differential signal and power supply.
B. The power supply voltage requirement is higher than 4.5V
C. Does the LVDS output resolution comply with the VESA standard
D. If the main chip of the LVDS signal board is FIFO output, it is not supported.
Q2. The HDMI output screen size is normal, the screen color is abnormal , How to solve??
Answer:
A.The data format of LVDS signal does not match the configuration of the adapter board, 1CH 8bit or 2CH 8bit.
B. upload a correct firmware of your LVDS controller board or enter the factory menu to set LVDS MAP (VESA OR JEIDA).
C. Adapter board upgrade firmware , reconfigure parameters.
Q3. the HDMI output screen size abnormal or position shifted , How to solve?
Answer: The LVDS controller board adjusts the LVDS parameters and is strictly configured according to the VESA standard.
Q4. unstable phenomenon such as jitter or flicker in the HDMI output screen , How to solve?
Answer: Focus on checking the LVDS signal parameter configuration. The LVDS output turns off the spread spectrum (NOSSC) and turns on the FREERUN function.
Q5: Is there a way to re-refresh the firmware on this board to change 2ch 8bit into 1ch 8bit?
Answer:
Resolution switch: The default is Dual 8 mode, please short GND and S1 if you need Single 8 mode.
LVDS signal source: The default is VESA, please short S2 and GND if you need JEIDA.
Package Include:
- 1 X LVDS to HDMI adapter board
- 1 X LVDS cable