Seafrogs SF-01 Strobe for DSLR Camera Underwater Photography,for Sony A7 II A7 III Canon Nikon Panasonic Fujifilm, For Canon, Nikon , Sony ,Panasonic Fujifilm Waterproof Housings

100% Satisfaction

Customer Feedback

Professional Seller

Camera & Photo

Money-back guarantee

Guarantee

Item Description

Sea Frogs SF-01 Underwater Strobe 
Guide Number 32 
120º Angle of Coverage without Diffuser 
Robust & Durable Construction Against Heat 
Rear glowing panel with easy to read control.
200 lumen Target Light

The Sea Frogs SF-01 offers a phenomenal range of features and benefits. Combining high power, wide angle coverage and near instant recycling with thought through user friendly exposure functions and triggering options, the SF-01 leads the field outperforming many much larger and heavier underwater flashguns.

 

KEY FEATURES:
Powerful G.N. 32 and UNDERWATER coverage 120 degree

Yet lightweight and compact body, the SF-01 is designed to produce G.N. 32
Further more, the SF-01 has overcame drawback of high-power strobe which has long flash duration and reaches to FULL power after start flashing in significantly short period of time.

200 lumen, Shutter-linked AUTO OFF Focus Light
The built-in "Shutter-linked Auto-Off Focus Light" delivers 200 lm brightness to support when focusing a subject and cease in synch with the shutter release and automatically turns ON again.
To aim optical axis of the Focus Light in line with strobe light’s optical axis, the Focus Light has a fresnel lens in front supporting more accurate strobe aiming and improved usability.

Learning Mode /7 Steps Manual Flash Mode
A unique accurate auto learning mode LM has been further evolved. Accuracy of exposure is advanced providing more accurate exposure.
In addition, optimized high performance slave sensor never miss camera’s trigger signal even faint or partially damaged fiber optics cable can trigger the strobe to offer faultless triggering.
Precised 1/2EV. increments 7 steps Manual flash control is onboard to support professional use.

Both Optical/Electrical Trigger Supported
The SF-01 is equipped with a 5 pin sync connector as well as slave sensor to trigger optically to adopt wide variety of camera system.

Automatic Power Off
The SF-01 strobe will turn OFF automatically if it´s not being used for more of 180 minutes. You need to turn the mode knob to OFF and ON again.

 

TECHNICAL SPECIFICATIONS:

  • Guide Nº on land: 32
  • Connection: Optical Connection / Electrical Connection
  • Strobe Control Mode:
  • Manual Flash
  • Manual Flash + Focus light
  • Focus light
  • LM (learning mode)
  • TM (test mode)
  • Manual settings: 7 steps
  • Strobe Beam Angle: >120º
  • Focus Light Beam Angle: 20º
  • Colour temp at full power:  Approx. 5000-6000K
  • Colour temp with diffuser: 5400K
  • Recycle time: 1.5 - 2.5 seconds
  • Flash Capacity: Approx. 500 flashes
  • Battery capacity indicator: yes, green light > 50%, yellow light 25-50%, red light 10-25%
  • Focus Light Intensity: 6w LED - 200 lumen
  • Focus Light Burn Time: Approx. 6.5 h
  • Compatible Batteries: 2x 18650 Litium-Ion batteries *
  • Over-pressure relief valve: yes
  • Working Temperature: 0ºC - 30ºC / 32ºF - 8ºF (water temperature)
  • Storage Temperature: 0ºC - 30ºC / 32ºF - 86ºF (air temperature)
  • Body Material / Color: Polycarbonate resin / black
  • Depth rating:  100m / 328ft

* There are three types of 18650 batteries in the market, please choose only models with PCB protection that measure 69mm.


DIMENSIONS & WEIGHT 

  • Width: 96 mm
  • Height: 118 mm
  • Length: 149 mm
  • Weight: Approx. 751 g (without batteries)

 

WHAT'S INCLUDED:

  • 1 x SF-01 Strobe
  • 1 x Cold strobe diffuser
  • 1 x YS (Sea&Sea) Mount
  • 1 x Ball joint mount with YS mount at top
  • 1 x Neoprene sleeve
  • 1 x Fiber optic sync cord
  • 1 x 2x double 7mm optical cable plug (Sea&Sea type connector)
  • 1 x Spare O-ring (Battery Box)
  • 1 x O-ring Removal Pick
  • 1 x O-ring Grease
  • 1 x Lens cleanning tissue
  • 1 x User´s manual
     

 

We accept payment from PayPal, VISA, MasterCard

Payment Methods
PayPal
- With verified and confirmed address
- PayPal account holder must also be the receiver
- We will only ship to addresses corresponding to the PayPal payment
- No surcharge

 

VISA/MasterCard
- With verified and confirmed address
- VISA account holder must also be the receiver
- We will only ship to addresses corresponding to the PayPal payment
- Surcharge(According to eBay policy)


REMINDER: If you require any additional service, please be sure to include your request with payment, we will try to help you to the best of our ability. And if possible,please also provide your phone number (country code + area code + phone number) in order to help us serve you better.

Usually the goods will be delivered via International Post Air Mail Service after the payment has been paid in full and cleared. Please allow within 48 hours for shipment arrangement after completion of payment.


Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.


Please be noted: that the delivery time mentioned on our page is for reference only. Although the actual shipping time is punctual in most occasions, in some cases delivery time may vary due to traffic congestion, adverse weather, acts of custom inspection, etc. We will try our best to avoid such situations, however, please understand that some of these situations are beyond our control, and we are not reponsible for them.

We provide 30 day return policy for products sold. If, for any reason, you are not satisfied with your purchases, full refund of the purchase (excluding the shipping expenses) can be applicable under the following circumstances:


ALL accessories must be unused; ALL accessory packages must be unopened.


ALL items must be intact and undamaged (except for defects in manufacturing).


Items must be in good conditions with all original accessories, manuals, and packing materials. Any missing parts or damaged items will result in rejection on the return.


In case of any defectives found, only defects in manufacturing are accepted as the reason of return.


No refund is given if defects are caused by misuse of buyers. Our customer service officers will gladly contact you for further arrangement upon your request.
 

All shipping cost thus generated is paid by the buyer.

We maintain high standards of excellenceand strive for 100% customer satisfaction.Positive feedback is very important to us.We request that you contact us Immediately BEFORE you give us neutralor negativefeedback,so that we can satisfactorily address your concerns.


Our office hour:
-9:00a.m.-- 6:00 p.m.(GMT+8) of Monday to Friday
-And our company is closed on Weekend and Public Holiday (China)
We apologize for the late reply during the holidays! But hope that our customers give us their understanding.

We are professional photography equipment seller! You will find many excellent and affordable items here!