Flow Matched Set!! High Flow, High Performance Injectors
New High Performance Flow Matched Harley Davidson Fuel Injectors.
Fits 2017 & Up Models Equipped With Milwaukee Eight
7.1 Grams Per Second, 600 CC Per Minute, 57 LBS Per Hour, @ 43.5 PSI.
The listed set has a single outlet revolving ball and seat with a 18-degree spray angle. These injectors are designed to flow at a higher rate than the standard OE injectors. You will find the spray pattern to be excellent.
Check out our competition and you will find that no one can offer the variety of flow rates we do. This allows tuners to get the exact flow rates they require and the detailed information they need to do a proper setup. We also include a comprehensive flow analysis that contains specific information needed for proper tuning.
We specialized in fuel injectors, and in fact that’s all we do! You won’t find a better High Performance fuel injector for your Harley Davidson anywhere.
These are NEW fuel injectors that are made and engineered in the USA. We only sell these in flow-matched sets and they come with a detailed flow report that is specific to each set. We have included a sample report in this listing for reference. The detailed report includes Static and Dynamic flow rates, as well as a complete offset chart. This information is critical during the tuning process.
Fuel injected Harley Davidson engines from 2006 and up are known to foul injectors and develop drivability issues. Old fuel, long downtime between use, and high heat all contribute to injector problems.
Since most Harleys are not driven daily and are stored for extended periods, the OE injectors may develop deposits. The longer they sit the more likely this is to happen. The results in bad spray patterns as well as decreased fuel flow. This causes poor idling, throttle hesitation, less midrange performance and can lead to less overall power.
Our High Performance Injectors are engineered using all steel internal components. They are much less susceptible to contamination due to fuel issues and extended downtime. They are compatible with all fuel types including E85 and offer superior performance.
Our Injectors have been tested by some of the leading tuners in the country and have an excellent acceptance rate. In fact, these were specifically designed for tuners.
Before ordering these injectors please make sure that the flow rate listed is exactly what you need. We strongly recommend that you consult with a professional tuner before ordering any upgraded or high flow injectors. Increasing flow rates or adding high flow injectors without additional modifications is not advised, and may cause damage to your engine. We are not responsible for any issues that may arise from misuse of our product. If there is any doubt please don’t order these injectors.
We also urge you to check the measurements of your current injectors before you place your order. These injectors are made to fit the OE throttle body only, and may not work with aftermarket products. Again, we will accept no responsibility for misuse of our product.
All sets carry a 12 month unlimited mileage warranty. We replace these in like sets only. Customer is responsible for all return freight charge.
If you have questions or need additional information pleased contact us. We usually respond within a few hours of your request.
Thanks for checking out our listing!
Are your fuel injectors really “BRAND NEW” parts?
A)
We
specialize in selling Brand New injectors at extremely low prices, but also
offer Factory Remanufactured fuel injector sets. All of my Ebay listings are clearly
and accurately described as either “Brand New OEM Injectors”, “Brand New
Injectors” or as “Factory Remanufactured Injectors”. We are also the exclusive online
distributor for “Xtreme High Performance” and “Xtreme Upgrade” product line of
Fuel Injectors. All of the Factory Remanufactured Injectors we sell are professionally
remanufactured at the 2nd largest Fuel Injector Remanufacturing
Production facility in
Q)
How can
you sell BRAND NEW fuel injectors so cheap?
A)
We get
asked this question often. Having been in the Auto Parts business for over 40
years, I’ve worked for Warehouse Distributors, owned & operated Retail Auto
Parts Stores, served in a Regional and National Management capacity for three
Major Auto Parts Manufacturers and also pioneered an Internet Auto Parts web
site in 1998. I am now semi-retired. Selling
on Ebay is a part-time venture as an associate broker and consultant for the #
2 Fuel Injector Remanufacturer in the
Q)
How
do I know that these parts are correct for my vehicle?
A)
Every
part we sell on Ebay is thoroughly researched and cross referenced using
Wrenchhead’s NexCat electronic database and matched to OEM manufacturer’s
production data. NexCat is a professional & expensive Subscription Only
electronic auto parts catalog and informational database service used
nationwide by major auto parts manufacturers, wholesalers and retailers. Please
note that all car companies are notorious for superseding and duplicating OE
parts with new numbers from year to year when in fact, the parts are
carry-overs, identical and completely interchangeable. Also note that the number stamped in or
printed on a fuel injector is NOT necessarily the OE part number. It can also
be a component or casting/molding number. Cosmetic (color) changes & minor
modifications are also common over a part’s application & life cycle,
resulting in multiple part numbers that are identical specs. We also offer some fuel
injectors that may look slightly different than your OE parts but are the same
electrical & flow specs and critical dimensions. Those are noted as such in
their listings. Don’t just assume that because the injector “looks
different” that it will not work. Example:
we offer Brand New Denso, Bosch and Siemens-Deka injectors for certain GM, Ford
and Chrysler vehicles that are truly an upgrade in quality compared to the OEM
injectors and may look a bit different. The
bottom line is that if we list a part as fitting your particular vehicle, it
will fit and perform as good as or better than the parts you remove …Guaranteed. After 20 + years specializing in the Fuel
Injection business, with large wholesale customers all around the world,
perfection and accuracy is a necessity.
Q)
What is
the difference in a Brand New OEM part vs. a Brand New Aftermarket part?
A)
OEM parts are made by several different fuel injector manufacturers,
contracted by the car companies to supply them. Most, but not all, OE injectors
are now made by
As previously mentioned,
I do not sell any aftermarket parts that are less than OE Quality parts. Absolutely NO cheap Chinese
knock-off junk! But it’s out there all over eBay … so Caveat Emptor ...
Buyer Beware!
One final note regarding fuel injector brands: Delco (now called AC-Delco) is
not a fuel injector manufacturer. In fact they no longer make any parts. It is
now an independent marketing company, a name on a box only, but is still
associated with GM. GM sold off all their wholly-owned parts manufacturing divisions
years ago. If you buy a Delco part for a GM built vehicle the part is sourced
from the actual OE supplier … therefore it is a Genuine GM part. However, the injector inside a Delco box will
be a part made by Bosch, Siemens-Deka,
If you have any questions about any part we list or are concerned about
physical appearances or dimensions being different, just email me before
ordering for a specific, professional reply.
Q)
I want
to buy your fuel injectors since they are such a great deal but am not sure how
to install them. What do you suggest?
A)
First and foremost, please do not attempt to install fuel
injectors if you are not fully capable of the job. These are high-pressure
fuel systems and the installation requires skill and technique to avoid damage
to the injector o-rings. Most of our buyers are advanced “Do-it-yourselfers” or
qualified Professional Installers or they have a friend whose capable of doing
the install for them. If
you are planning on buying the parts yourself and taking them to a Professional
to do the installation, check
with the Service Manager or Owner of the repair shop you intend to use and tell
them that you intend to supply the parts AND read this message first:
Taking
your own parts into a Car Dealer or Professional Installer
According
to Professional Installers taking your own parts into a Car Dealer or Independent
Shop is like taking two eggs, four strips of bacon and two pieces of toast into
your local restaurant and expecting the meal for next to nothing because you
supplied the food. It is considered unethical and is in fact far less
profitable for the trade Professionals. They typically make as much profit from
the sale of repair parts as they do from the labor, depending on the job, of
course. A 50% + profit
margin on parts sales is the norm in the auto repair industry and should be
expected. Parts purchased
through a New Car Dealer are typically higher priced parts vs. those purchased
through Aftermarket sources, such as a local major brand auto parts store.
Most Car Dealers in
metropolitan areas are owned by large corporations or “dealer groups” who likely
own several car brand dealerships. They are certainly not dishonest but they
couldn’t care less about saving you a penny! Their service bays contribute much of the
dealer’s overall profit. And most independent repair shops are also honest,
hard working small business owners. But there’s a small percentage of
Professional Installers that may resort to less than honest tactics if asked to
install parts furnished by the customer. That being the case, if you plan to
supply your own parts and have them installed by a commercial repair shop I highly suggest that you tell them
in advance, when getting an estimate of repairs, and get all the details in
writing. Many shops
simply will not install parts supplied by the customer for various reasons,
some legitimate, some not. Those few less than honest shops may agree to
install your parts … BUT:
* There will be NO warranty on the job, whatsoever.
* Tell you that the
parts you supplied are NOT the right parts or that they’re inferior
quality
and refuse to install them after your car is in the shop. This
leaves you with a
disassembled vehicle in their shop and
no choice but to buy their parts anyway.
* Overcharge you
for labor (to cover the lost profit on parts sales)
* Install your parts but
do so improperly (sabotage?) leaving you in a very bad
situation and in the process “teaching
you a lesson”. Yes, that HAS actually happened!
What I can assure you of, with complete confidence, is that any parts you buy
from us are OEM or Equal Quality parts that are 100% correct for the vehicles
we have them listed as fitting. The exception would be previously modified
vehicles or possible engine swap situations ... which are beyond our crystal
ball’s capabilities to divine.