Electric Mini Grinder Polishing Tool Cutting Carving Machine Set for Metal Wood Glass
  • Condition:100% new
  • Color:Pink
  • Material:Plastic & Iron & Emery
  • Polishing Length:approx.15.5cm(6.1inch)
  • Charger Cable Length:approx.65cm(25.59inch)
  • Chuck Diameter:0.24cm(0.09inch)
  • Speed:3000-20000RPM
  • Output:DC 9V 0.5A
  • Input:AC 100-240V 50/60HZ
  • Power:9W
  • Plug:EU
  • Suitable for:grinding, engraving, polishing (additional polishing needle), drilling (additional drilling bit), cutting (additional cutting grinding) etc.
  • Item included:

    1 x Mini Electric Grinder

    1 x Charger

    1 x Box of Drilling Bit

    1 x Instruction (English&Chinese)

    Note:

    1) All dimensions are measured by hand, there maybe small deviations.

    2) Color may vary slightly due to the color setting of each individual monitor.


Product Dimension:

Feature:

1) 100% new and good quality material.

2) The use of engineering principles design, fashion modeling, feel good.

3) High quality motor running low noise.

4) Six grinding bits can be used interchangeably, and the rotation speed can be adjusted at any time.

Using Method:

1. press the round metal button on the front of the main engine, lock the rotating shaft on the grinding machine, and loosen the nut at the front end of the main engine;

2. choose the grinding head you need and insert the grinding head into the nut hole at the top of the main engine;

3. continue to press round metal button, tighten the nut on the top of the host, and fix the grinding head on the main shaft of the grinding machine;

4. connect the power adapter to the grinder and plug in the 220V power supply;

5. push the switch, adjust the rotation speed of the main engine, and then rotate the grinding head slowly close to the grinding object, according to the need to polish the shape you want;

6. When the main engine rotates, please avoid pressing the metal button on the grinding host so as to avoid the excessive current and burn out the main engine;

7. After use, please unplug the power supply, keep the grinding machine properly.

DataCaciques