malfunction

reason

elimination method

1. No particles can be produced when the die hole is blocked when the machine is turned on

1. Corrosion of flat die hole

2. The hole of the flat mold is rusty and the finish is poor

3. The gap between the template and the pressure roller is too large

1. Remove residual particles in the die hole

2. Roll, extrude and grind with powder with high oil content

3. Adjust the gap between 0.1-0.3 mm

2. The particles contain too much powder or do not form particles

1. The moisture content of the powder is too low

2. The moisture content of the powder is too high

3. The powder contains a large amount of crude fiber

1. Increase water content

2. Reduce water content

3. Increase viscous powder

3. The output gradually decreases

1. The gap between the mold and the roller is too large

2. The moisture content is too low

1. Adjust the gap between die rolls

2. Increase the water content

4. The particles are hard and shiny

Low moisture content of powder

The water content of the powder is low, increase the water content of the powder

5.Rough development of the soft surface of the particle edge

1. Improper moisture content

2. First use of the new template

1. Increase or decrease water content

2. Grind the machine repeatedly

6. The pellet machine suddenly suffocated

1. There is a big hard object or metal entering between the mold rolls

2. Insufficient voltage

1. Remove foreign objects

2. Check the circuit voltage

Shipping & Handling Details

Return / Refund

If you are not 100% happy with your purchase, please contact Us. Please don't directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding.

Returns & Exchanges

▲ All returns must be made within 30 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.
▲ Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged.
▲ Returns that are the result of our seller's error: Buyer will receive a full refund of the item as well as shipping charges
▲ All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.

Defective & Damaged Products

▲ If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲ Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method.
▲ If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.

Payment

Warranty & Feedback