Parcel include:
1 x 6 Axis NVCM Mach3 Motion Control Card
1 x USB Cable
English user manual and plug-in file will send by email.Descriptions:
1. Performance parameter
1) Support USB;
2) 16 ports photoelectric isolated input interface;
3) 16 ports photoelectric isolated output interface;
4) 1 port 0-10V spindle speed analog output interface(can change to PWM output);
5) can support 6 axis stepper systems,125KHz pulse output for every axis;
6) ARM motion control chip;
7) Main device is 24V-32VDC power supply input,current should higher than 1A;
2.Product connection define and method
the connection of the controller includes power supply interface, USB connection interface, MPG interface, Stepper/Servo control output interface, spindle control output interface, Estop and limited switch and tool setting input interface and so on. Now we descript them in details as below.
Now we descript them in details as below.
1.USB port
As the Figure showed, Marked No. 1 position is the USB port. Mach3 connect to this board through the USB port.
2.Main power input
No.1 terminal block is Main power input interface, need input 12-40VDC/above 20W. There is silkprint "+" and "-",left terminal is "+" and right terminal is "-".
3.Limit/Home/Estop/Probe input port
Marked No. 3 position is the input port. they are the optical isolated Input interface.
The silkprint INP1 INP2 GND INP3 INP4 INP5 INP6 INP7 INP8 INP9 GND IN10 IN11 IN12 IN13 IN14 IN15 IN16 GND 12V on the board connect to PIN1-16 of the mach3.
4.This interface has been cancelled
5.MPG port
6.Universal output interface 2
7.Spindle control output/ Universal output interface 1
8.Stepper motor driver port
3. Stepper motor control interface
X/Y/Z/A/B/C from left to right. Each axis's pin is defined as COM+/CP-/DIR- from left to right.
4. Spindle control output/ Universal output interface 1
|
|
|
---|---|---|
3 lines Proximity Switch3 lines Proximity Switch connection,brown cable for Proximity switch connect with 12V,Black cable connect channel, blue cable connect with GND1. Only support NPN 3 lines proximity switch. |
2 lines Proximity Switch2 lines Proximity Switch/ordinary fretting switch / drawing |
Spindle control output/ Universal output interface 1
|
Shipping
Please open the package and check if there are some damages before sign,if there are some damages,please do not sign and contact us immediately.
Problem&Feedback
Please give us the opportunityto resolve any problem when you have,we concern your problem and we will try our best to resolve it.
Pls contact us before you want to leave any negative feedback.
Refund
Any reason required for all refund. Item must be in it's original condition and no physical damage,buyer responsible for all shipping cost.
When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos.