Please read the instructions carefully:
[book] supportThe fittings are ready to be assembled on a smooth surface.not to let
Grinding machine tilt, swing
Before plugging in the socket,affirm
countersign
notarize
The power switch of the grinding table is closed.
nullGo inWearprotect
shield
be partial to
Eyepiece. Don't usually wear glasses protective role.
When the glass or other abrasive grinding wheel contact, do not open the machine
Don't let it be Child contact
When not in use, turn off the power supply
In order to maintain the grinding table.stableWork, regular maintenance and lubrication
Specification:
Color:Red
Speed: 4200r/min
Voltage: AC 1100V
Working table size: 165x165 mm/6.5" x 6.5"
Machine size: 195x195x160 mm/7.7" x 7.7" x 6.3"
Suitable for grinding glass,ceramics and other hard and brittle material.
Fit for: MCBL1,MCBL58
Package Included:
1 x Glass Grinder with MCBL58
5/8" diamond grinder bits with machine
Features:
● Stable and reliable performance.
● Automatic Stained.
● Dents switch design, avoid the leakage.
● Glass, ceramics, such as grinding hard brittle materials.
● Grinding variety of geometric shapes: plane, curve, rounded corners, slope, etc.
Grinding wheel installation:
1nullYou have lubricant)
2The grinding wheel is installed on the engine shaft, the position of the fixing screw is higher than the engine shaft. The position of a grinding wheel on a shaft.At the very least1/8"The diamond is partially exposed on the table.
3Use the six angle wrench to fix the grinding wheel on the shaft clockwise.
Note: keep the grinding wheel stable on the plane of the engine shaft.
Grinding wheel use:
Keep in mind when grinding wear goggles or protective mask
1, if you are just start to use, open grinding machine switch feel, try a small piece of glass grinding. With this smallForce the glass to the grinding wheel and move back and forth
2Slowly increase the pressure until speed is comfortable with your control. You will soon learn about it.Better pressure on glassEffect.
3Occasionally, stop and observe the water level. No water in the grinding process will reduce the service life of the grinding wheel.
4Over time, the grinding wheel will reduce the grinding efficiency, resulting in broken glass due to diamond on the surface of the grinding wheelWear caused. When this happens, loosen the screw with a hex wrench and put the grinding wheel on the shaftMoving to expose parts of a new diamond.1/8"
Note:
1, can not be ground without water. When grinding, make sure the wheel is wet.
2When using a grinding wheel, use small to medium force, and do not use too much force. too much force when pushingIt will reduce the service life of grinding table and grinding wheel.
3After each use, clean the cistern. Remove the reservoir and clean up the remaining residue after grinding.
4In order to extend the service life of the grinding table, clean and lubricate the engine shaft.25smallAfter the hour,need
want
require
Remove grinding wheel and fixed screw.
5, if the grinding wheel for a week or more, don't use, need to grind down on stage. To preventAnd the axis. This will help you develop a habit of checking engine shafts and grinding wheel maintenance
6Don't grind metal. If you grind metal with it, it will damage the grinding wheel and make it unsuitable for grinding glass.