DIALUX® BLACK and GREEN ROUGE

JEWELRY POLISHING COMPOUNDS-
Dialux® SET OF  BLACK & GREEN  

The set of Black and Green Dialux Brand French polishing compounds are especially formulated for Silver and White Metals and Metal Alloys.  The Dialux polishing compounds are a high grade premium polishing line of compounds specifically formulated for Precious Metals in Jewelry Polishing, 

Dialux Green and Black compounds work for Silver and White Metals.

Bar Sizes: 4" x 1" x 1-1/8"  - 100mm x 25mm x 30mm
Bar Weights: 120 Grams - 4 Oz. 
Bars are individually wrapped like Chocolates
.
   ·        Utilizes Graded Abrasives
  ·        Blended with Additives
  ·        Long Lasting with Minimum Usage
  ·        Good Adhesion to Buffing Wheels
  ·        Produces Smooth Surface - Super High Shine.

Sale is for SET of 2 BAR  

SHIPPING: Via First-Class Mail® Package

NOTE: Visit  JETSINC  ebay Store Listings, where you can see all the various types of Dialux® Polishing Compounds, Buffing Wheels Polishing & Finishing Supplies and a range of many more Jewelers Equipment Tools & Supplies. JETS INC.

POLISHING RECOMMENDATIONS:
Our recommendations and suggestions on Buffing to obtain the best results possible:
·        Use the right compound for the metal that you are trying to polish
·        It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve.
·        Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove lines and scratches.
·        Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge with a buff rake.
·        Segregate your buffs for the various metals, Gold, Silver, Brass … try not to use the same buff for all metals.  If you have to then make sure buffs are cleaned (dressed) with a buff rake.
·        A clean buffing wheel edge is important.
·        Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the   process.      
·        Whenever you are working with Platinum never use a buff that was used for another type of metal.

WORK SAFE!   Working with rotary motors and wheels can be dangerous if proper safety procedures are not followed.  Protect yourself, your fingers and hands, your face and eyes and use respirators.

7E  1121 CPSK  CKSP