New RV LED Awning Light Set with bluetooth controller.  Compatible with Android and IPhone

Over 16 Feet of super bright RGB color changing LED Lights to light up your RV, camper, mobile home, awning or boat.

This is a RGB LED Light Strip 16' feet long.  This light strip is waterproof.  


This kit is specifically designed for recreational vehicles.   The strip is held in place by it's adhesive backing

Product Description

This controller support IOS 6.0 version and Bluetooth version 4.0 or above.

It can achieve remote control ,switch light,adjust brightness .There are 16 million

colors and dozens of light changing modes.In addition.

This controller is designed for LED strip, module etc. After easy installation and settings, you can use your Phone (IOS 6.0 or Android system for Samsung 4.3 version or above) to control.

The remote control distance reach 8-10meters.

 

Specifications:

 

Connection Methods:Bluetooth Version 4.0

Suitable Phone OS:IOS version 6.0 above ,Bluetooth version 4.0 or above

Software language:English , automatic recognize language according to OS.

Working Temperature:-20~60C

Working Voltage:DC12V

Output channel:4CH/RGB

Output current:2x3A

Effective Remote Distance: 8-10M.

Size:86*45*23mm

What's included in this kit:

  • 1 16' Pc. of 5050 Waterproof LED strip light w/Wire lead.  This LED Light strip is RGB which can switch from blue, green, red and any combination of the colors to create tons of different color combinations.  3528 LED light strip comes with 1 red, 1 green and 1 blue in series and then the configuration repeats all the way up to 16' feet.

  • 1 x Bluetooth controller compatible with Android and IPhone software with color changing capability and different flashing and strobing modes.  Change from a cool subtle color change or a fast and vibrant strobe effect.
  • 110v power cord


How to install

  • This strip can be mounted in many places; Use it for under cabinet or foot board lighting.  Accent walls, hard to reach cubby holes and tables.
  • Select the location where you want to mount the light, take in account how you want to get the 12 volt power to this strip. We suggest starting the wire end of the strip near a  power source.
  • Clean the mounting surface with rubbing alchohol. Remove the 3M backer and install end to end. Please be careful and plan ahead, this channel will not come off once it has been applied.
  • Remove the 3M backer from the LED strip, then apply.
  • Connect the Strip light wire lead to any 12V or 110v  switched source and enjoy your new LED lights for 50,000 plus hours.
  • Note: This is very easy for any DIY to do.  


Don't forget to add any of our accessories like our 3ft or 16 ft -

4 wire extension so you don't need to wire your receiver box so high.  


We also sell additional IR and RF remotes that can be switched out 

for different uses as well as replacement plugs and adaptors.   Just 

ask us and we can send you a link or look in our ebay store.