Product presentation:
The remote control is widely used, mainly used for remote control of electric retractabledoors, elevators, remote control barriers, remote control rolling doors, garage doors, sliding doors, remote control LED lights, remote control fireworks igniters, remote control passenger doors, anti-theft alarms, electric door alarms , MP3 motorcycle anti-theft alarm, some car remote controls, etc.
Copyable chip:
2260 (all manufacturers), 2262 (all manufacturers), PT2264 (all manufacturers), 5326 (allmanufacturers),527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers)HT6026, HT6012, HT6014, HT600, HT680, HT6010, HT6207, HT640,HT6P12E, HT6P20D, 12L-4SCPT2292, 12L4SC, SC5262, PLC168, NF9420116, UM3750AM, SMC918, SMC908, 1416, 5211
HCS101, HCS200, HCS201, HCS300, HCS301 (partial code)
Instructions:
1.Code cleaning method:
Press the unlock button and lock button at the same time(some shells are the up button anddown button), after the LED indicator light flashes three times, loosen any one of the buttons while the other is kept pressing, then push the released button three times, the LED indicator will enter into the fast flashing status. At this time all the memory data is cleared, the cleaned remote control will not have lighting LED indicator no matter which button you press.
2. Copy method:
One hand keeps the original remote controller, while another keeps the copy remote control,the two remote controls should be placed as closely as possible (the ideal situation is to put the two remote controls on the desktop side by side with zero distance), respectively press down the copy button, when the LED indicator light flashes quickly after three flashes, this copy is successful, other key operating methods are the same. Some remote control has a smaller transmitting power, so the original remote control should be placed back to the copy remote control to be perated. For the presence of noise, it should avoid interference to operate, If the copy is not successful, it should recopy after clearing code.
parameter:
Packing method: sealed bag (with English manual)
Working voltage: DC12V (1 pc of 2032 battery)
Working current: 10mA@12V
Radiation power: 10mw@12V
Transmission frequency: 433MHZ
Transmission distance: 100-150M (open area, the sensitivity of the receiving device is
negative 100dbm)
Encoder type: fixed code. learning code. part of the rolling code. program code
Colour: Black
Function: Copy remote control/test remote control/copy remote control
Size: 5.8*3*1.2
Weight: 30 grams
Probably Package Size: 5.8*3*1.2cm 30g
Package list:
1*channel remote control