4 x ADSL Filter/Splitter Broadband MicroFilter DSL
4 x ADSL Filter/Splitter Broadband MicroFilter DSL
Pack of 4
This filter is for UK broadband lines, fitting in a standard BT plug socket and splitting the signal into Voice and Data, providing a BT socket for a phone and an RJ11 socket for a ADSL modem.
This item has been SIN 346 certified by BT.
Other info For POTS voice band service, the M-ADSL-Filter provides protection from ADSL signals, which may impact through non-line or other remote devices (handset, fax, voice band modem etc) and central office operations. For ADSL signals, it also provides protection from the high frequency transient and impedance effect that occur during POTS operations (ringing transients, on-hook, off-hook transient and so on). Because the POTS splitter in the M-ADSL-Filter connects directly to the subscriber loop media, it also provides some protection for externally induced line hits or faults which could damage any attached equipment or endanger people interacting with the installed equipment. The circuit protection will be provided mostly by standard central office line protection means and additional protection measures built into the POTS splitter to protect against line overstress, which could damage the splitter itself.
Features: All requirements for this specification can be met in the presence of all POTS loop currents from 0 mA to 100 mA. This Single In-Line filter can pass POTS tip-to-ring DC voltages of 0 V to 105 V and ringing signals of 40 Vrms to 150 Vrms at any frequencies from 15.3 Hz to 68 Hz superimposed on DC voltages in the range from 0 V to 105 V. The DC resistance from tip-to-ring at the line port interface with the phone interface shorted, shall be less than or equal to 50 ohms for one filter. The DC resistance from tip-to-ground and from ring-to-ground at the Phone interface with the Line interface open shall be greater than or equal to 10 Megohms. The ground point shall be local building or green wire ground. As an objective, the DC resistance should exceed 10 MW.
A quality ADSL Broadband filter at a great price.
Fully BT Labs tested - BT certified.
Product Details ::
SKU : 000739
Product Weight : 30 grams
SKU : 000739-4
EAN : 5054338036519
Product Weight : 0.096
Brand : kenable
kenable_ltd - eBays Number 1 Cable Seller!
Check out our kenable shop to see our complete range of cables and peripherals.
Where is kenable Ltd based?
Our warehouse is in Rainford, St. Helens, in the Northwest of England.
Can I pick up the item today?
If you need to pick up, we're open from 9am till 4.30pm Monday-Friday. Everything we have is in stock at our warehouse.
Can I speak to someone at kenable?
If you need any help or assistance, please phone us on 01744-886752 from 9am till 4.30pm Monday-Friday
When will kenable send my order if I buy now?
Order before 3.30pm on a week day and we'll ship SAME DAY! For orders placed after 3.30pm on Friday, they'll be shipped on Monday (excluding Bank Holidays)
How does kenable send their orders?
We use Royal Mail 48 (2-5 days) for all of our small items, and Royal Mail Tracked 48 for our bigger ones.
Can kenable send it quicker?
If you need to upgrade, we offer Royal Mail 24 (1-2 days) for our smaller items, or Royal Mail Tracked 24 for bigger ones.
Can I have it tomorrow?
We also offer Parcelforce 24 Next Working Day service for £4.99 per order. If you need pre-noon, just give us a phone.
Will I get the item I see on ebay or a different one?
We take all of the images you see ourselves, so it should be exactly the same. Our pickers pick and pack by barcode scanners so the chances of us sending the incorrect item is very uncommon.