Xy-T01 Digital Thermostat Heating Refrigeration Digital Temperature Control
Condition:New
Supply Voltage:5V
Model Number:XY-T01
Operating Temperature:-40-+85
NTC10K sensor
Functions:
Set Temperature ---- SetT;
Backlash Temperature-----BackT;
1. Heating Mode 'H':
When Temperature ≤ SetT - BackT Relay conduction, heating equipment begin to work;
When Temperature ≥ SetT, Relay disconnect, heating equipment stop work;
2. Refrigeration mode 'C':
When Temperature ≥ SetT + BackT Relay conduction, refrigeration equipment begin to work;
When Temperature ≤ SetT Relay conduction, refrigeration equipment stop work;
3. High Temperature Alarm 'ALA':
When Temperature ≥ Alarm Temperature, The system opens the sound and light alarm, and disconnects the relay, any key stops the sound light;
4. Delay Start ‘OPH':
When a normal heating or refrigeration work is done, the system starts to time T, and only after the T≥OPH, the system can carry out the next round of heating or refrigeration work;
5. Temperature Correction Function OFE(-10.0 ~ 10.0°):
The system will work for a long time and may have deviations that can be corrected by this function, Temperature = Measured + Calibration;
6. Parameter Remote Read/Set:
The parameters such as setting temperature, backlash temperature and temperature correction can be set through UART.
7. Real-time Temperature Report:
If the temperature reporting function is turned on, the product is transmitted to the terminal by the UART at 1s intervals, which facilitates data collection;
8. Relay enable (default enable):
If the relay is disable, the relay remains disconnected;
9. Restore factory Settings:
At the same time press the STOP, set key more than 3S, restore factory settings;
Working mode setting /backlash temperature :
1. In the running interface, short press SET key, enter the Quick setting interface;
2. After entering the Quick Setup interface, switch the parameters
3. Through the UP DOWN key, modify the parameter value, support short press/long press;
4. Long press SET to build more than 3S or continuous 6S without any key operation, exit quickly set the interface, and save parameters;
Alarm temperature/delay Start /temperature correction:
1. In the operating interface, long press SET more than 3s, enter the parameters to set the interface;
2. Enter the parameter to set the interface, through the short press SET key to switch to set the parameters ;
3. through the UP DOWN key, modify the parameter value, support short press/long press;
4. Long press SET 3s above or continuous 6S without any key operation, exit parameter set interface, and save parameters
How to turn on high temperature alarm (default off):
Enter the parameter setting interface, switch to the alarm parameter ALA , turn on or off the high temperature alarm function by short pressing the STOP button, and if the high temperature alarm function closes, ALA displays \'----\' as a reminder;
How to turn on delay start (default off):
Enter parameter setting interface, switch to alarm parameter OPH, turn on or off high temperature alarm function by short Press STOP button, if high temperature
Serial Control (MCU UART)
Communication standards:9600bps Data bits :8
Stop Bits :1
CRC :none
Flow control :none
CMD | Description |
start | Start temperature report |
stop | Stop temperature report |
read | Read parameters setting |
on | Relay Enable |
off | Relay Disable |
S:XXX | Setting Temperature -50 ~ -01 00.0~99.9 100~110 |
B:XX.X | Set Backlash Temperature (00.0~30.0) |
OFE:XX.X | Temperature Calibration(-10.0 ~ 10.0) |
ALA:XX.X | Alarm Temperature(-50.0 ~ 110.0) |
OPH:XXXX | Delay Start(0 ~ 9999 Minutes) |
|
|
Note:
Measuring temperature range: -50℃ to 110℃
Package Includes:
1 x XY-T01 Digital Thermostat with 10K NTC
- Delivery times vary from 2-16 business days.
- Using Canada Post letter-mail service.
- Small items only, less than 500g, less than 20mm thick.
- No tracking or insurance.
- You will be notified by us when your item has shipped.
- If combined economy charges exceed $8-12 your order may be automatically upgraded (at no charge) to Expedited Parcel
- Delivery times vary from 1-7 business days.
- Uses Canada Post Expedited Parcel service.
- Fast and economical.
- Fully tracked and insured
- You have 30 calendar days to return an item from the date you received it.
- Please contact us via eBay's messaging system prior to returning any items.
- All returns must be approved by our team. We will work with you to resolve any concerns.
- All items being returned should include; any accessories, components and original packaging etc.
- Once we receive your item, we will inspect it and notify you that we have received your returned\item.
- If your return is approved, we will initiate a refund to your credit card (or original method of payment).
- You will be responsible for paying for your own shipping costs for returning your item.
- Refunds and exchanges are handled on case by case basis.
