Super strong STASS® double-sided adhesive strips.

Available in Clear or Grey.

Our strong acrylic adhesive strips can be used indoors and outdoors to hold and fix a variety of objects in the home, workplace or in your vehicle (cars, caravans, motorcycles).

Easy-peel and ready to use, each strip has a handy tear-off tag to assist with removing the red backing liner and not damage the adhesive strip. If you require further help to remove the liner we recommend a sharp blade.

Acrylic adhesive does not damage your surfaces and does not leave any residue when removed. Once a good bond has been achieved these sticky pads are designed to provide a permanent hold.

How to use our strips:

1. Clean the surfaces with an alcohol based cleanser and allow to thoroughly dry. This adhesive is best applied in dry conditions with temperature 10c or above.

2. Peel off a strip and place on the surface, pressing firmly across the pad for at least 10 seconds.

3. Allow the bond to cure, this takes at least 6 hours up to 24 hours for full adhesion.

4. Remove the red backing liner and apply to other surface using the same pressure technique.

5. Do not hang weight from the pad until the curing process has completed, do not attempt to test the adhesion or move the sticky pad as this will weaken the bond permanently.