QUALITY ASSURED VINYL DECAL STICKERS

A single wheel decal sticker so you can purchase as many as you require for O.Z Racing rally wheel to fit a wheel center diameter of 315mm for 17" wheel rims, overall size will measure 18" approx as the 17" measurement is taken from the inner diameter of the rim with the tyre off.

x8 decal sticker sized at 315mm diameter with a 5mm cap all round with two required per wheel.

These are only suitable for use on air drying paint as used by the manufacturer none of them bake the paint on because it will crack so only bake for display use only.

The decal pictured on this listing is set on a circle with an outside diameter of 315mm so you need to tell us what size diameter (circle) you require to fit your wheel.

These are not cheap to make as I only use the best vinyl, I can make cheaper decals but they won't last so we don't.

Q. If my wheel or calliper is powder coated will they stick?

A. I don't recommend power coating nor would the brake or wheel manufacturer unless you are using them for display purposes only as the plastic coating will crack over time during use so this is why it is not used so only use air drying solvent paints as advised by the brake or wheel manufacturer.

You can apply the decals but you will need to leave them on the wheel for at least 24 hours (in some cases a lot less) before trying to remove the clear plastic carrier film as the resin left on the surface requires more time for the adhesive to stick, this is a problem for all vinyl’s on this type of surface even though the vinyl used has the world’s best adhesive.

These coatings prevent the sticker adhesive from quickly cutting through the Hammerite or Powder coated resin finish left on the surface but if it is important that you want to try buyers have had success by leaving the decal on the surface between 24 to 72 hours before attempting to peel away the top carrier film, this is a process I use myself when there is a problem with the paint finish but don’t mention it as most buyers thing there's a problem with the adhesive.

The letters are pre-spaced on a carrier sheet with release liner for quick and easy application, you also receive a a printed application instructions.

Part No. OZRACCO315-RED-O8

Please Note you are ordering RED coloured decals as this is the default coloured if you require in white, black, yellow, orange and silver or Gold please see the details below.

You only pay once for postage if you are overcharged for more than one order we will refund any over payments.

Any questions please see details below.


 


You can apply the decals but you will need to leave them on the wheel for at least 24 hours (in some cases a lot less) before trying to remove the clear plastic carrier film as the resin left on the surface requires more time for the adhesive to stick, this is a problem for all vinyl’s on this type of surface even though the vinyl used has the world’s best adhesive. These coatings prevent the sticker adhesive from quickly cutting through the Hammerite or Powder coated resin finish left on the surface but if it is important that you want to try buyers have had success by leaving the decal on the surface between 24 to 72 hours before attempting to peel away the top carrier film, this is a process I use myself when there is a problem with the paint finish but don’t mention it as most buyers t