• 1 x 3KW 220V Inverter VFD (Huan Yang Brand)  220V(+/-15%) input & 220V output

• 1 x 2m extension cable/control panel box

• 1 x English user manual

                         

100% Brand New and High Quality!

This VFD can be used for constant torque loads(such as hard starting:Air conpressor,HVAC units) and variable torque loads(such as pumps,fans,etc) It can be used as a motor speed control and a phase converter.The inpute for this VFD is 1 or 3 phase as you like.You can control different speed when you use this VFD.Most of our customers bought this VFD from us to use for:Lathes,Mill,car Hoists,Pumps&conveyors,etc.This item use sine wave PWN(SPWM) for the control system and performace excellently.

Product Description

Installation/use environment

In order to make the cooling effect, the frequency converter must be installed vertically and ensure that the air is flowing smoothly. Before installing and using the product, please read the instruction manual (included in the package) of the inverter carefully to give full play to its functions and ensure safety. Notice: If your motor's speed is not 24000rpm, please first restore the factory settings and change PD013 to 8, then you can set other parameters, after that can you connect the VFD to 3 phase motor.

3KW 220V VFD Variable Frequency Drive

Input Voltage: 220VAC(+/-15% ) Output Voltage: 220VAC Input Frequency: 48-63 Hz Output Frequency: 0-400 Hz Input Phase: 1 or 3 phase Output Phase: 3 phase General Control: In addition to 4 segment reduction time (0.1-6500 seconds) can be arbitrarily selected, not only can set a V / F curve, but also set torque, up to 10.0% start torque can reach 150%. There are also other functions, like an automatic voltage regulator (AVR), deceleration stop or free stop, DC brake, automatic reset reset, frequency tracking, PLC program control, transverse control, carrier adjustable by max 20kHz, ect. Input/Output Terminals: 6 Multi-function input terminals can implement 8 speed control, program operation, 4 segment reduction switching, UP/DOWN functions, counter, external emergency stop function. There are 5 multi-function output terminals for displaying running, zero speed, counter, external abnormity, program operation and other information and warnings. Multi-Protection Functions: Including overload protection, FUSE broken-motor stops protection, over-voltage / low-voltage protection, restarted by frequency track after instantaneous stop, anti-stall during acceleration/deceleration operation, electronic circuit protection. And many other protection functions, such as over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, ect.

Features

PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability; Easy PLC function can realize 16 legs of speed and inverter control function; With extremely strong anti-jamming capability Low output ratting torque0.5HZ-150%, low speed running ability; Carrier adjustable by 16KHZ, completely soundless working environment; Broad voltage working area, normal running in 304V-456V; Auto voltage regulation (AVR) technique, for ensuring the inverter load capability; Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes; With perfect error protection and short circuit starting protection capability.

LED Display

1: Led display zone, indicating: POWER, FOR, REV, Frequency, Current, Revolution, etc. 2: Main diaplay zone, indicating: Frequency, Current, AC V, DC V, Revolution, Counter temperature, etc. 3: RUN: Run key Stop: Stop / Reset key JOG: FOR / REV switch PRGM: Fuction key SHIFT: ( DISP ) Shift key SET: Set key ( Enter ) UP / Down: Power value change key

Wiring

Notice: If your motor's speed is not 24000rpm, please first restore the factory settings and change PD013 to 8, then you can set other parameters, after that can you connect the VFD to 3 phase motor. Wiring: VFD's U= Spindle's U1 VFD's V= Spindle's V1 VFD's W= Spindle's W1 Connect any 2pin terminal "R", "S" or "T" of the inverter to "220VAC".

 

Shipping
Please open the package and check when you receive the parcels,if there are some damages before sign,if there are some damages , please do not sign and contact us immediately.
We will ship your order within 1-2 working days after payment.

Refund&Replace
Any reason required for all refund.Item must be in it's original condition and no physical damage.

Feedback
Please contact us first when you have problems,and we will try our best to help you to solve it.
Pls contact us before you want to leave any negative feedback,we will provide solutions,negative feedback can not solve any problems.

Customers' service
1.We are happy to have your questions.If you have any question before or after purchase, please feel free to contact us.
2.If there is any problem about the items when you have them , please contact us firstly. We are here to solve them by the friendly and quick ways.