Strong magnetic sheet + gasket design: ensure the accuracy of side hole is less than 0.5mm
Convenient quick gripper: two clamping methods for precise and convenient punching
CNC computer engraving and molding: ensuring precise and reliable products and precise punching
The eccentric wheel hole is precisely adjustable: the eccentric wheel hole position is adjusted according to the length of the connecting rod
feature:
1. Adjustable drill guide rails to easily meet your drilling requirements.
2. Equipped with a special splint, when punching the side, it is not necessary to use a locking pliers to clamp the board.
3. Equipped with 6/8 / 10mm drill sleeve and twist drill to accurately drill holes of corresponding size.
4. Forged with high-quality tool steel, the drill sleeve has good strength and long-term durability.
5. The rigorous and precise process ensures high precision and long service life.
specification:
Drilling guide material: 6061 aluminum alloy
Drill casing material: nitride tool steel
Drill thickness: 10-180mm
Side hole diameter: 15mm
Positive hole size: 6/8 / 10mm
Slider stroke: 5-90mm
Side hole stroke: 23-43mm
Please refer to the manual for other details.
Package list:
1* extended positioner
3*6mm drill sleeve
3*8mm drill sleeve
3*10mm drill sleeve
2* knurled bolt
1*6mm limit ring
1*8mm limit ring
2*10mm limit ring
2* star screw
1*15mm hole opener
1*6mm drill bit
1*8mm drill bit
1*10mm drill bit
1* crescent wrench
1* clamping plate
1* slider set
1* motherboard
2* gasket
2* hex wrench
1* instruction manual
Note:
Since the slider slides 2mm each time, it can only be aligned with the center of the 10, 14, 18, 22mm and other boards. If the thickness of the plate is not these thicknesses, it cannot be aligned with the center to punch holes without adding a gasket.
Starkes magnetisches Blatt + Dichtungsdesign: Stellen Sie sicher, dass die Genauigkeit des Seitenlochs weniger als 0,5 mm beträgt
Praktischer Schnellgreifer: Zwei Spannmethoden für präzises und bequemes Stanzen
CNC-Computergravur und -formung: Für präzise und zuverlässige Produkte und präzises Stanzen
Das exzentrische Radloch ist präzise einstellbar: Die exzentrische Radlochposition wird entsprechend der Länge der Pleuelstange eingestellt
Merkmal:
1. Verstellbare Bohrführungsschienen, um Ihre Bohranforderungen problemlos zu erfüllen.
2. Ausgestattet mit einer speziellen Schiene, ist beim Stanzen der Seite keine Klemmzange erforderlich, um die Platine festzuklemmen.
3. Ausgestattet mit 6/8 / 10 mm Bohrbüchse und Spiralbohrer, um Löcher mit entsprechender Größe genau zu bohren.
4. Die Bohrhülse ist aus hochwertigem Werkzeugstahl geschmiedet und besitzt eine gute Festigkeit und Langlebigkeit.
5. Das strenge und präzise Verfahren gewährleistet hohe Präzision und lange Lebensdauer.
Spezifikation:
Bohrführungsmaterial: Aluminiumlegierung 6061
Material des Bohrgehäuses: Werkzeugstahl aus Nitrid
Bohrstärke: 10-180 mm
Seitenlochdurchmesser: 15mm
Positive Lochgröße: 6/8 / 10mm
Schiebereglerhub: 5-90mm
Seitenlochhub: 23-43mm
Weitere Einzelheiten entnehmen Sie bitte dem Handbuch.
Paketliste:
1 * erweiterter Positionierer
3 * 6mm Bohrhülse
3 * 8mm Bohrhülse
3 * 10mm Bohrhülse
2 * Rändelschraube
1 * 6mm Grenzring
1 * 8mm Grenzring
2 * 10mm Grenzring
2 * Sternschraube
1 * 15mm Lochöffner
1 * 6mm Bohrer
1 * 8mm Bohrer
1 * 10mm Bohrer
1 * Halbmondschlüssel
1 * Klemmplatte
1 * Schieberegler eingestellt
1 * Motherboard
2 * Dichtung
2 * Sechskantschlüssel
1 * Bedienungsanleitung
Hinweis:
Da der Schieber jedes Mal um 2 mm gleitet, kann er nur mit der Mitte der 10, 14, 18, 22 mm und anderen Platinen ausgerichtet werden. Wenn die Dicke der Platte nicht dieser Dicke entspricht, kann sie nicht mit der Mitte ausgerichtet werden, um Löcher zu stanzen, ohne eine Dichtung hinzuzufügen.
Shipment | Fast Shipping From EU Warehouse |
---|---|
Herstellergarantie | 2 Jahre |
Marke | Markenlos |
Herstellernummer | nicht zutreffend |
Drilling guide material | 6061 aluminum alloy |
Drill casing material | nitride tool steel |
Drill thickness | 10-180mm |
Side hole diameter | 15mm |
Positive hole size | 6/8 / 10mm |
Slider stroke | 5-90mm |
Side hole stroke | 23-43mm |
Transportation does not include | Canarias ( 加那利群岛 ) |
Produktart | Dübellehre Bohrschablone Führung Kit |