Benchtop PH Meter Conductivity Meter TDS Tester With mV Temperature Display
Note :Liquid and battery are not included During the Shipping
Multiparameter pH/conductivity meter contains 12 options, the meter is suitable for measuring the pH, mV, conductivity and TDS.
pH Mode:
• Multiparameter pH/conductivity meter is equipped with a large backlit LCD display.
• 1 to 5 points calibration with automatic recognition for USA, NIST and DIN buffers.
• Automatic electrode diagnosis shows the pH slope and offset.
Conductivity/TDS Modes:
• 1 to 5 points calibration with automatic recognition for conductivity standards.
• Selectable cell constant (K=0.1/1/10), reference temperature (20/25°C), TDS factor, linear
and pure water compensation modes.
Other Features:
• Automatic temperature compensation ensures accurate readings over the entire range.
• Auto-Read function senses and locks the measurement endpoint.
• Calibration due alarm prompts user to calibrate the meter regularly.
• Calibration report provides the details of electrode performance.
• Setup menu allows setting the number of calibration points, stability criteria, temperature
unit, date and time, auto-power off, etc.
• Reset function automatically resumes all settings back to the factory defaults.
• Expanded memory stores or recalls up to 500 data sets.
• USB communication interface for data transfer and timed interval readings.
Specifications
Model | Bante901 | |
pH | ||
Range | -2.000~20.000pH | |
Accuracy | ±0.002pH | |
Resolution | 0.001, 0.01, 0.1pH, selectable | |
Calibration Points | 1 to 5 points | |
pH Buffer Options | USA, NIST, DIN or custom | |
mV | ||
Range | ±1999.9mV | |
Accuracy | ±0.2mV | |
Resolution | 0.1, 1mV, selectable | |
Conductivity | ||
Range | 0.01~20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm | |
Accuracy | ±0.5% F.S | |
Resolution | 0.001, 0.01, 0.1, 1, automatic | |
Calibration Points | 1 to 5 points | |
Calibration Solutions | 10µS/cm, 84µS/cm, 1413µS/cm, 12.88mS/cm, 111.8mS/cm | |
Temperature Coefficient | Linear (0.0~10.0%/°C) or pure water compensation | |
Cell Constant | K=0.1, 1, 10 or custom | |
Reference Temperature | 20°C or 25°C | |
TDS | ||
Range | 0~10.00, 100.0, 1000ppm, 10.00, 100.0ppt (Max. 200ppt) | |
Accuracy | ±1% F.S | |
Resolution | 0.01, 0.1, 1, automatic | |
TDS Factor | 0.1~1.0 (Default 0.5) | |
Temperature | ||
Range | 0~105°C, 32~221°F | |
Accuracy | ±0.5°C, ±0.9°F | |
Resolution | 0.1°C, 0.1°F | |
Offset Calibration | 1 point | |
Calibration Range | Measured value ±10°C | |
General | ||
Temperature Compensation | 0~100°C, 32~212°F, manual or automatic | |
Stability Criteria | Low or high | |
Calibration Due Alarm | 1 to 31 days or off | |
Memory | Stores up to 500 data sets | |
Output | USB communication interface | |
Connector | BNC, 6-pin DIN | |
Display | 6.5" custom LCD | |
Power | DC5V, using AC adapter, 220V/50Hz | |
Dimensions | 210(L)×188(W)×60(H)mm | |
Weight | 1.5kg |