Li-ion Battery BMS Protection Board 3S 18650 Lithium 10A AMP 11.1V 12V 12.6V USA
Description:
This is a 3S Battery Management System (BMS) protection board. This module is designed to be packaged with three 18650 lithium ion cells connected in series. This BMS module is suitable for creating a lithium battery pack with a nominal voltage of 11.1V, 12V, or 12.6V. It has a maximum discharge rate of 10 AMPS. This BMS board will provide over voltage/over charge protection and under voltage/over discharge protection. It also provides over current protection in case the device drawing power from your lithium ion cells is pulling too much current. This BMS protection module also provides short circuit protection. This BMS will work with most lithium ion or lithium polymer (lipo) battery chemistries, not just 18650 cells. It will not work with other battery chemistries (Lithium Phosphate, Lithium Iron, NiCd, etc.).
Specifications:
CompatibilityLi-ion, Lipo Batteries
Over Voltage Range4.25-4.35V ±0.05V
Over Discharge Voltage Range2.3-3.0V ±0.05V
Maximum Current Cutoff10A
Quiescent Current<30uA
Internal resistance<100mΩ
Charging Voltage12.6 – 13V
Working Temperature-40 to +50 Degrees C
Storage Temperature-40 to +80 Degrees C
Effective Life> 30000 Hours
Length
Width
Height