110 Viton O-Ring, 75A Durometer, Round, Brown, 3/8" ID, 9/16" OD, 3/32" Width
Size:110 | Nominal Inside Diameter:0.362 Inches | Nominal Outside
Diameter:9/16 Inches | Nominal Width:0.103 Inches | Inside Diameter
String:0.362 Inches | Outside Diameter:9/16 Inches | Item Width String:0.103
inches | Number of Items:50 This O-ring is made of brown Viton and has a
durometer of 75A. It has a round cross-section and can be used across a wide
temperature range (-15 degrees F/-26 degrees C to 400 degrees F/205 degrees
C). Designed for use in a wide variety of sealing applications, this Viton
O-ring meet standards defined by Aerospace Standard AS568A, which is the
Aerospace Size Standard for O-rings. Viton (fluorocarbon elastomer) has high
heat, fuel, and chemical resistance, and is compatible for use with non-
flammable hydraulic fuels, silicone oil, chlorinated hydrocarbons
(trichlorethylene), fuels, aromatic hydrocarbons (benzene) and aliphatic
hydrocarbons (propane), as well as high vacuum environments, ozone, and
weathering. Viton is vulnerable to low molecular organic acids, ammonia gas,
alkalis, amines, glycol-based brake fluids, and super-heated steam. The
durometer hardness of this Viton O-ring is 75A. Durometers measure the
hardness of a material and its resistance to permanent indentation. A higher
durometer value indicates greater resistance to indentation. On a scale of 0
to 100, a value of 0 indicates that a sample was completely penetrated, while
a value of 100 shows no indentation in the sample. The letter following the
number identifies the shore scale, which is either shore A or D. Shore A is
used for softer plastics, while shore D is used for harder plastics. O-rings
provide a pressure and fluid seal between cylindrically shaped, overlapping
mating surfaces and are commonly seen in engines, faucets, flanges, valves,
and various cylinders. They are circular in shape, with a round cross section,
and a hole in the center, similar to a doughnut. O-rings are available in
various AS568A dash sizes, which is the standardized sizing for O-rings, and
defines the nominal inside diameter (ID), outer diameter (OD), and cross-
sectional (CS) diameter of an O-ring.
Product Details
| Brand | Sterling Seal & Supply, Inc. (STCC) |
|---|---|
| Size | 110 |
| Product Type | O Ring Seals |
| Mpn | 50X BV75110 |
- Made of Viton (fluorocarbon elastomer) for use with a variety of chemicals and fuels
- Durometer (hardness) of 75A for resistance to penetration
- Round cross-section to provide a seal between cylindrical overlapping surfaces
- For use across a wide temperature range from -15 degrees F/-26 degrees C to 400 degrees F/205 degrees C
- Meets standards defined by Aerospace Standard AS568A
Check out my other items.
-
All sets will be shipped the next business day after payment.
Need A Kit Not Listed? Just ask
Send us a sample kit, we'll make it, then we'll return your kit and some FREE kits for your trouble.
Se Habla Espanol!
Thank you for looking at our eBay items, we hope to have the opportunity to prove to you why we have earned our great feedback through same-day shipping to support after the sale. Have a great day!
Service Connected Disabled Veteran Owned Business!
* Brand names, Trademarks, Copyrights, and Patented Products: Any use of any Trade Marked names, brands, products, or words that refer to those products and their respective companies are by reference only, and by reference does not imply that we are associated with them in any way or any of the items we list or mfg. are derivative of their mfg. or marketing processes. For some industrial parts we sell, they can be aftermarket parts and are offered as an alternative to the OEM parts as a cost-effective alternative. Any and all words of trademarked products and uses of such, either alone or in combination, are intended only to refer to the original company and-or its products for comparison only and not intended to create an impression of our company being related to, our items created by or we being licensed by any such company or legal distributor of said products or manufacturers.
Graco Inc. Any use of the word "Graco®" on this web site refers to Graco® Inc. Professor Foam and O-Ring Depot are not associated with Graco® Inc. and is not responsible for the quality of Graco® brand products or their respective warranties. Graco®, Fusion®, GX7®, GAP®, Probler, P2®, Gusmer®, Glascraft®, and CS® are words which may be associated with Graco® Inc. and/or its products and which may be copyrighted and/or trademarked by Graco® Inc. All uses of these words alone or in combination are intended to refer to the company Graco® Inc. or its products.