About this item

• Compatible 12-24V Vehicles: 11.5ft Micro USB Hardwire Kit for dash cam or other device powered by Micro USB port. The JYX04 Hardwire kit can accept voltage from any type of vehicle from 12V-24V, suitable for continuous power for cars, truck, bus, SUVs, or big rig. Input:12V-24V, Output:5V/2.5A, Micro USB port.

• 24 Hours Surveillance: AZDOME M300S dash cam has 24-Hours Parking Mode. It requires continuous power, JYX04 Hard Wire Kit connect to car battery or fuse box power, can realize continuous power supply for 24 hours for dash cam. It can even supply power when the car is turned off. Any collision and event will be recorded by the dash cam.

• Low Voltage Protection: Built-in Smart low voltage protection system. If the voltage of your car battery drops to 11.8V or 23.6V, hardwire kit will automatically cut off the power after 60s, which leaves you with enough power to start your car for the next time.

• High Secure Standards: The Hardwire kit has ACC detection function, AZDOME Micro USB Dash Cam Hardwire Kit with built-in precise switching power supply module can transform 12V(24V) to 5V. The built-in safeguards protect your devices against excessive current, overheating

• Easy Installation: Contains all accessories required to easily installed on any vehicle fuse box. Simple hidden wiring keeps the car neat and tidy and releases the cigarette lighter for connecting to more devices.

Worry-Free Aftersales

Every customer is fully covered by 1-YEAR WARRANTY. If you’re having any doubts, it comes with a Full Refund within 30 DAYS. As always, AZDOME promises you 24/7 online customer service.

Four Options of Low Voltage Protection:

For 12V Battery: 11.8V 12.0V 12.2V 12.4V

For 24V Battery: 23.6V 24.0V 24.4V 24.8V

Note: If you press at the same time to select 2 or more options, or do not select the voltage option, this default voltage cut-off is 11.8VDC for a 12VDC battery and 23.6VDC for a 24VDC battery. 12.2V or 24.4V recommended for most users in general driving conditions.

Reverse connect protection

Short circuit protection

Overload protection

Overtemperature protection (protection circuit over 130℃, return to normal when it drops to 90℃).

Total Cable Length: 3.5 Meters (input 0.8 meter, output 2.7 meters)

Output Connector: Mini USB plug, DC 5V, 2.5A

Working temperature: -20℃ to 90℃

Hard-wire kits, there are 3 wires that need to be connected:

M300s Dash Cam Micro USB Hardwire Kit 12V-24V to 5v(Micro USB / 11.5ft):

AZDOME This is a must-have if you use a dash cam in your car or truck. The Hardwire kit has ACC detection function, It connects the camera directly to the fuse box under the dashboard for continuous power from the vehicle’s battery. M300S dash cam is built in Super Capacitor. No power pack or batteries. It must be powered by connecting to your car, so if you want to use parking mode you need to purchase hardwire kit with 3 wires, the output current need reach 5V/2.5A

Reverse connect protection,Short circuit protection,Overload protection

Overtemperature protection (protection circuit over 130℃, return to normal when it drops to 90℃).

Total Cable Length: 3.5 Meters (input 0.8 meter, output 2.7 meters)

Output Connector: Right Angled Mini USB plug, DC 5V, 2.5A

Working temperature: -20℃ to 90℃

Dash Cam Hardwire Kit Specifications:

● Output Connector: Micro USB plug, DC 5V/2.5A

● Input: DC 12/24V

● Cable Length: 11.5ft (3.5M, input 0.8 meter, output 2.7 meters)

● Low Voltage Protection: When voltage lower than 11.8 V or 23.6 V, automatically cut off the power

● Overtemperature protection (protection circuit over 130℃, return to normal when it drops to 90℃).

● Reverse connect protection, Short circuit protection, Overload protection

A RED wire (BAT+), needs to connect with constant fuse, which can provide power to dash cam even when the vehicle is off.

A YELLOW wire (ACC), needs to connect with Fuse Box ACC, which can make the dash cam auto power on&off when the vehicle is on&off.

A BLACK wire (GND), needs to connect with metal bolt or screw, which can prevent electric shock.

NOTE: The Parking Mode only works on dash cam that have the function of detecting ACC, this will make your camera record based on your camera’s parking mode setting.

Warm Tips:

If you don't have experience on installing the hardwire kits for the dash cam, please ask professional for help.

Always refer to the vehicle owner’s manual to avoid fuse slots that could pertain to important safety features within your vehicle. For example, avoid fuses that controls airbags, stability control programs, etc.

Always refer to the vehicle owner’s manual to avoid fuse slots that could pertain to important safety features within your vehicle. For example, avoid fuses that controls airbags, stability control programs, etc.

Fuses that control certain elements such as the radio, garage door opener, sunroof, etc. are usually safe to use.

Steps:

Please connect the red wire to always powered, the yellow wire to ACC, and the black wire to ground.

If the AZDOME hardwire kit is connected correct, find the "Park" menu in the menu, press OK to select connected, tick parking monitoring, and press the menu button to exit and save the settings

Once the car turns on ACC, AZDOME M300S dash cam will automatically turn on, and once the car turns off, the camera will enterTime-Lapse Parking Mode / Motion Detection Parking Mod / Collision Detection Parking Mode automatically when hardwire the camera correct.