We will ship this product from Germany to you.
ship by Germany DHL to EU Customers
Welcome to choose our products | ||||
fast shipping time to the following EU Countries | ||||
Austria | Belgium | Bulgaria | Czech Republic | Denmark |
Estonia | Finland | France | Germany | Greece |
Hungary | Ireland | Italy | Latvia | Lithuania |
Luxembourg | Netherlands | Poland | Portugal | Romania |
Slovakia | Slovenia | Spain | Sweden | United Kingdom |
Package include:
1 x 3/4/6 Axis UC300 USB port Mach3 CNC Motion Control Board
1 x Connection Cable
2 x Terminals
English manual,driver and mach3 software will be sent via e-mail.
100% Brand New and High Quality!!!
Package include:
1 x 3/4/6 Axis UC300 USB port Mach3 CNC Motion Control Board
1 x Connection Cable
2 x Terminals
English manual,driver and mach3 software will be sent via e-mail.
100% Brand New and High Quality!!!
Product Description
The UC300 is a high-performace external motion controller for Mach3, with USB port communicated Mach 3 software,supporting standard MPG and Digital Dream MPG.The device can communicate with a connection to a control computer’s network.The network connection can be built with direct connection by USB Port. The computer connects to the UC300 via a standard USB cable.It’s the best to shiled the communication USB cable to ignore the interferences. The device can be used to control machine tools with stepper or servo motor with pulse and direction interface;the controller can output a maximum of 300kHz stepping frequency for each axes and can work with upto 6-axes.The Controller is 3-6 Axis for user's options.
Features:
1. Motion control 3-6 Axis(X,Y,Z,A,B,C) for option,max frequency output 300Khz/Axis;
2. USB Communication with Mach 3 Software;
3. Main power supply 24VDC,Current should higher than 1A;
4. IO
Power is 24VDC power supply input,current should higher than 1A(The
controller already supply the power for IO port,no need the external
power supply for IO port anymore);
5. 12 opto-isolated digital input ports,10 opto-isolated digital output ports;
6. 1 analog output port of 0-10V adjustable speed for spindle (can change to PWM output port);
7. ARM motion control chip;
8. Compatible with Standard MPG and also Digital Dream MPG
Product connection define and method
1. USB Communication Interface to PC
2. Stepper/Servo motor Driver connection port
3. Spindle Control Output Port
4. Gerneral Output Interface
5. MPG Port
6. Functional Switch for MPG:Standard MPG or Digital Dream MPG
7. Serial Extend Port
8. Input Port:Limit/Home/Probe and so on
9. Adjustable parameter Input Port
10. Main System and IO Power Port
Product Description
The UC300 is a high-performace external motion controller for Mach3, with USB port communicated Mach 3 software,supporting standard MPG and Digital Dream MPG.The device can communicate with a connection to a control computer’s network.The network connection can be built with direct connection by USB Port. The computer connects to the UC300 via a standard USB cable.It’s the best to shiled the communication USB cable to ignore the interferences. The device can be used to control machine tools with stepper or servo motor with pulse and direction interface;the controller can output a maximum of 300kHz stepping frequency for each axes and can work with upto 6-axes.The Controller is 3-6 Axis for user's options.
Features:
1. Motion control 3-6 Axis(X,Y,Z,A,B,C) for option,max frequency output 300Khz/Axis;
2. USB Communication with Mach 3 Software;
3. Main power supply 24VDC,Current should higher than 1A;
4. IO Power is 24VDC power supply input,current should higher than 1A(The controller already supply the power for IO port,no need the external power supply for IO port anymore);
5. 12 opto-isolated digital input ports,10 opto-isolated digital output ports;
6. 1 analog output port of 0-10V adjustable speed for spindle (can change to PWM output port);
7. ARM motion control chip;
8. Compatible with Standard MPG and also Digital Dream MPG
Product connection define and method
1. USB Communication Interface to PC
2. Stepper/Servo motor Driver connection port
3. Spindle Control Output Port
4. Gerneral Output Interface
5. MPG Port
6. Functional Switch for MPG:Standard MPG or Digital Dream MPG
7. Serial Extend Port
8. Input Port:Limit/Home/Probe and so on
9. Adjustable parameter Input Port
10. Main System and IO Power Port
2). 4/6 Axis EC300
Package included:
1 x 4 Axis or 6 Axis EC300 Ethernet port MACH3 CNC Motion Control Board
1 x Connection Cable
2 x Terminals
English user manual,driver and mach3 software will send via e-mail.
EC300
is a 3-6 axis high-performance motion control card based on MACH3
software.
Development
and debugging, and finally upgraded to this version, with stable
performance, high control accuracy, and strong anti-interference
ability. The highest output pulse of EC300 is
300Khz,
the pulse width is adjustable, adopts the differential connection
method to be able to connect the standard stepping and the servo motor
drive; EC300 connects through the standard Ethernet interface
Connect
to the computer to realize the communication with MACH3 software.
Compared with the communication method of the USB interface cable with a
maximum length of 10 meters, the Ethernet communication cable is the
most
The
height can be up to 100 meters, which is more conducive to the
configuration and arrangement of the customer's machine, and the
anti-interference ability of the Ethernet interface is stronger; it is
used for communication with the computer
The Ethernet mode can be directly connected with a network cable or transited by a router.
Performance parameters:
1) Support 3-6 channel stepper/servo motor control (X/Y/Z/A/B/C), single channel up to 300KHz control pulse output;
2) Connect to the computer MACH3 software communication via Ethernet
3) The power input of the main control device is 24VDC, and the current capacity requirement is not less than 1A;
4) The IO port power input is 24VDC, and the current capacity requirement is not less than 1A;
5) The controller system provides a voltage of 24VDC and a current of not less than 1A to all IO ports, and all IO ports do not need to be configured externally.
Power supply, such as connecting relays and the like;
6) 12 optically isolated digital input interfaces, 10 optically isolated digital input interfaces;
7) 1 0-10V spindle speed control analog output interface (can be modified to PWM output);
8) ARM main control chip;
9) Equipped with MPG interface, supports our company's digital display MPG, and also supports the standard universal MPG on the market.
1 x 4 Axis or 6 Axis EC300 Ethernet port MACH3 CNC Motion Control Board
1 x Connection Cable
2 x Terminals
English user manual,driver and mach3 software will send via e-mail.
Development and debugging, and finally upgraded to this version, with stable performance, high control accuracy, and strong anti-interference ability. The highest output pulse of EC300 is
300Khz, the pulse width is adjustable, adopts the differential connection method to be able to connect the standard stepping and the servo motor drive; EC300 connects through the standard Ethernet interface
Connect to the computer to realize the communication with MACH3 software. Compared with the communication method of the USB interface cable with a maximum length of 10 meters, the Ethernet communication cable is the most
The height can be up to 100 meters, which is more conducive to the configuration and arrangement of the customer's machine, and the anti-interference ability of the Ethernet interface is stronger; it is used for communication with the computer
The Ethernet mode can be directly connected with a network cable or transited by a router.
Performance parameters:
1) Support 3-6 channel stepper/servo motor control (X/Y/Z/A/B/C), single channel up to 300KHz control pulse output;
2) Connect to the computer MACH3 software communication via Ethernet
3) The power input of the main control device is 24VDC, and the current capacity requirement is not less than 1A;
4) The IO port power input is 24VDC, and the current capacity requirement is not less than 1A;
5) The controller system provides a voltage of 24VDC and a current of not less than 1A to all IO ports, and all IO ports do not need to be configured externally.
Power supply, such as connecting relays and the like;
6) 12 optically isolated digital input interfaces, 10 optically isolated digital input interfaces;
7) 1 0-10V spindle speed control analog output interface (can be modified to PWM output);
8) ARM main control chip;
9) Equipped with MPG interface, supports our company's digital display MPG, and also supports the standard universal MPG on the market.
Shipping Service
Please open the package and check when you receive the parcels,if there
are some damages before sign,if there are some damages , please do not
sign and contact us immediately.
We will ship your order within 1-2 working days after payment.
Problems&Feedback
Please contact us first when you encounter problems,and we will try our best to help you to solve it.
Pls contact us before you want to leave any negative feedback,we will
provide solutions,negative feedback can not solve any problems.
Refund&Replace
If you are not satisfied the product or it is other problem like as
broken,pls tell us the detail reason and provide the photos.
Any reason required for all refund.Item must be in it's original condition and no physical damage.
Contact us
Welcome worldwide customer inquire and questions, we will feedback customer’s message within 1-2 days.
Customer’s satisfaction is very important to us.Thanks!