Ultimarc PacLED64 with USB Cable for Single-Color or RGB LED Arcade Buttons

Working on a MAME of Virtual Pinball machine and need to control individual button LEDs?  The PacLED64 does that! With support for 64 single LED's or 21 RGB LED's this controller has full dimming, flash storage, and can be controlled by third party programs such as LED Blinky and RGB Commander.

Features:
  • 64 LED channels with 256 brightness levels for full RGB color mixing
  • Can be set to flash any or all LEDs at one of 3 rates, without PC control.
  • Can be used with single-color or RGB LEDs (RGB use 3 channels)
  • Constant current negates the need for resistors for each LED
  • Can be used with LEDs with inbuilt resistors if required
  • 128-command flash storage for “attract-mode” sequences which run immediately on power-up with no PC present
  • Supports single-command fades with preset speed on-board. Multiple fades can overlap
  • Comes with power cable for plugging into a PC disk drive power connector, and USB cable
  • User-assigned IDs allow multiple boards to be connected
  • Extensive software support including test application, Software Development kit for adding support to your own programs, and LedBlinky third-party software
Contains:
  • PacLED64 Board
  • USB Cable
  • 5v Power cable for connection to PC Power Supply
  • 4 24-way empty connector housing to plug into the board
Optional Addons:
  • 5v 2a Power Supply (If you're not using a computer power supply and need 5v) - We only have this on our site, not on Ebay yet
  • PacLED64 10-Wire Harness - We only have this on our site, not on Ebay yet
PacLED64 Configuration Utility
  • Download the config software from our site or from Ultimarc, we can not link to it from Ebay.
Installation
  • Each LED must have its negative connection (cathode) connected to one of the numbered pins 1-64.
  • Each LED must also have its positive (anode) connection connected to one of the supply pins marked "+". It does not matter which of the "+" pins you use as they are all connected together on the board.
  • You can daisy-chain multiple LED + connections and connect to one + pin.
  • Note: Industrias Lorenzo RGB Pushbuttons (aka Ultimarc's Classic RGB), as well as both Ultimarc's and our Goldleaf RGB buttons will all plug in directly to the RGB connections on the board.
  • The pins labeled A1-A6, PR, NX and GND are for future customized OEM versions of the board and are not used in the standard version
  • The 2nd photo shows a schematic representation of three LEDs connected to channels 31-33:

Important Shipping Info:
  • Ebay is not smart enough to remove First Class Mail as a shipping option when the ordering multiple items puts the order over 1 pound. Be sure you review the shipping options and select Priority Mail during checkout if that one is cheaper.
* We ship every Mon-Fri, order by 12pm Eastern and your order ships that day! *

About Us: Specializing in arcade games and other entertainment industry items, including poker tables and slot machines, T-Molding.com has been providing t molding to the gaming industry since 2000 and arcade parts through Arcade Renovations since 2016. We have over 150 different t-moldings of various sizes & colors, and over 450 arcade parts, all stocked and shipped from our warehouse in Colchester, CT.