makes the installation of underfloor heating simpler and easier than ever before.
Ideal for Walls 200w per m2 and Floors 136w per m2
Domestic and Commercial
Three easy steps to select your products (please see below)
DITRA-HEAT-E is a underfloor heating system for creation of crack-free and comfortably warm floors. The heating cables of DITRA-HEAT are installed within the uncoupling mat for the targeted heating of the corresponding floor areas. With the flexible control of temperatures and heating times provided from the touch screen thermostats, you can use DITRA HEAT to create warm tiles whenever and wherever you choose. In some cases, the system can also be used as a full-scale primary heating system. 5.5mm thick
DITRA-HEAT-DUO is quick and quiet, providing optimal heating response, and up to 13dB impact sound reduction equivalent to a 50% reduction to the human ear within its unique integrated fleece fabric on the underside of the membrane, drastically reducing heat radiation into the substrate. The thermal break on the membrane‘s underside pushes 80% of the supplied heat to the surface during the heat-up phase. Enabling a significantly faster heat up response in the covering without any change in the low energy supply..7.5mm thick.
Step 1 Select enough Ditra Heat or Ditra Heat Duo Matting to cover the complete tiled area
Step 2 Select the size of cable to to fit the heated area required (remember to deduct and fixtures and fittings that will not be heated ie under toilets, baths, kitchen units etc)
Step 3 Choose which touch screen programmer...each programmer can run two cables Max 3600w
Cable Watts
1.1 / 150w
1.6 / 225w
2.2 /300w
2.7 / 375w
3.3 / 450w
3.8 / 525w
4.4 / 600w
5.0 / 675w
6.6 / 900w
7.7 / 1050w
8.8 / 1200w
10 / 1350w
12.7 / 1700w
15 /2050w
17.7 / 2400w
20 / 2700w
22.7 /3050w