Package Included:

1x  Single for Front Left Air Suspension Spring Bag

Compatibility 

1, Air suspension spring bags installed on the Truck, Coach and Trailer are designed usually as generic types.

2, Firestone Part Number collected all the air suspension model, which could be used as an Integration Code while searching on eBay or Amazon.

3, You can distinguish specific model of air suspension spring bags on your Autotruck/Heavy-Duty Truck/Touring Car/Passenger Coach/Trailer by checking original SPN(Supplier Part Number) listed as below, all of which has a consistent one-to-one match with specific Firestone Part Number.

Land Rover Range Rover L322
Autobiography Sport Utility 4-Door 5.0L 2012
Base Sport Utility 4-Door 5.0L 2010-2012
Base Sport Utility 4-Door 4.4L 2003-2004
HSE Lux Sport Utility 4-Door 5.0L 2012
HSE Sport Utility 4-Door 5.0L 2010-2012
HSE Sport Utility 4-Door 4.4L 2003-2009
Supercharged Sport Utility 4-Door 5.0L 2010-2012
Supercharged Sport Utility 4-Door 4.2L 2006-2009

Generation & Evolution:

Range Rover
Classic First generation (1970-1996)
P38A Second generation (1994-2002)
L322 Third generation (2002-2012)
L405 Fourth generation (2012-present)

Expanded Line
Range Rover Sport
L320 First generation (2005-2013)
L494 Second generation (2013-present)
SVR (2015 Pre-Facelift)
SVR (2018 Facelift)

Range Rover Evoque

L538 First generation (2011-2018)
L551 Second generation (2018-present)

Range Rover Velar
First generation (2017-present)

Platform Drive Layout:

Front Engine-Four Wheel Drive Layout

Part Number

RNB000070,RNB000750,RNB500550,
RNB501350,RNB501410,RNB501530,

LR032570,LR051702

Attention:

Vent all air pressure from the air suspension system prior to disconnecting or removing any air suspension components. It is dangerous to remove air suspension components while under pressure. Failure to follow this instruction may result in serious personal injury. 

  Any air spring which is unfolded must be refolded prior to being installed in a vehicle. Refer to the procedure. An incorrectly folded air spring could rupture, altering the handling characteristics of the vehicle. If a vehicle has been driven with an incorrectly folded air spring, a new air spring must be installed. Failure to follow these instructions may result in serious injury to vehicle occupant(s). 

  Failure to observe the following instructions may result in a sudden failure of the air spring or suspension system.
  Any rear spring which is unfolded must be refolded prior to being installed in a vehicle.
  The air spring refolding procedure should only be used for an air spring which has never supported the vehicle's weight while in the incorrectly folded position.
  Incorrectly folded air springs found on vehicles during pre-delivery inspection or after use must be installed new.
  Do not attempt to inflate any air spring which has been collapsed while uninflated from the rebound hanging position to the jounce stop.
  When installing a new air spring, care must be taken not to apply a load to the suspension until springs have been inflated using the air spring fill procedure.
  After inflating an air spring in the hanging position, it must be inspected for correct shape.

NOTE:

1.The vehicle must be positioned on a suitable lifting device prior to deflating the air suspension system.
With the vehicle in NEUTRAL, position on a hoist until the wheel and tire assemblies are slightly above the ground. 
2.Using the scan tool, vent the air springs.
3.Remove the air spring retainer.
4.Detach the air spring from the rear axle.
5.Remove the air spring in the following sequence.
1. Disconnect the air spring solenoid electrical connector.
2.Compress the quick connect locking ring and pull out the air tube.
3.Remove the air spring.

Q&A：

How soon can i receive the package?
     You will receive your package within 2-7 working days.

How about the After-sales Guarantee?
    We offer a warranty with 1 year, if there's any quality problem, please contact customer service.