Schluter Kerdi Board SN Shower Niche 4 Sizes
Schluter-Kerdi Board shower niches are prefabricated shower niche made of waterproof Kerdi Board
Four sizes to choose from, The two larger sizes come with a shelf which you choose the height to set at
305x152x89mm
305x305x89mm
305x508x89mm plus one shelf
305x711x89mm plus one shelf
Fixing
1.Determine desired location and trace around the outside of the Schluter®-KERDI-BOARD-SN flange, making sure the lines are level and plumb. Cut and remove the wallboard such that the niche will be supported on both sides by the studs or other wall framing.
2.Insert the niche and fasten to the studs with screws and washers placing the fasteners along the seam between the niche.
3.Joints between the niche and walls should be sealed with Kerdi Keba and Kerdi coll to create a water tight installation.
4.When using the prefabricated shelf determine the desired height of the shelf fix with cement based tile adhesive. The shelf may be raised at the back to create a slope, or the tile may be set on a slope during installation, to prevent water from pooling in the finished application. Continue tiling with cement based tile adhesive.
Material
Schluter-KERDI-BOARD-SN is made from extruded polystyrene foam, with a waterproof cement free reinforcement layer laminated to both sides and an anchoring fleece webbing.
KERDI-BOARD-SN is waterproof and vapor retardant and can withstand all chemical stresses that typically occur in conjunction with ceramic tile coverings. KERDI-BOARD-SN may be used in bonded waterproofing assemblies where required.
Order by 2pm for same day dispatch Mon-Fri
Any questions please call or mail me
Delivery to uk mainland...Delivery to highlands, islands POA