Product Description
Brand AZDOME
Connectivity technologies USB
Whats in the box Hardwire Kit
Mounting Type Adhesive Mount
Product Dimensions 3.46"D x 5.27"W x 2.09"H
Auto Part Position Rear
Are Batteries Included No
Real Angle of View 140 Degrees
Warm reminder:
Only suitable for M27 M580 M560 PG16S M330 M27 D100 LD05, etc.
Not suitable for M300S, PG17, M17, GS63H, M01, M63 Lite, M550, M550 PRO driving recorder.
If you need a hardwiring kit for these dash cams, please contact us, thank you!
About this item
【Compatible for AZDOME M27 Dash Cam with USB Type C】11.5ft Type C USB Hardwire Kit for dash cam or other device powered by Type C USB port. The JYX05 Hardwire kit can accept voltage from any type of vehicle from 12V-24V, suitable for continuous power for cars, truck, bus, SUVs, or big rig. Input:12V-24V, Output:5V/2.5A, USB Type C.
Product Description
M27 Dash Cam USB Type C Hardwire Kit 12V-24V to 5v(USB Type C / 11.5ft):
AZDOME This is a must-have if you use a dash cam in your car or truck. The Hardwire kit has ACC detection function, It connects the camera directly to the fuse box under the dashboard for continuous power from the vehicle’s battery. M27 dash cam is built in Super Capacitor. No power pack or batteries. It must be powered by connecting to your car, so if you want to use parking mode you need to purchase hardwire kit with 3 wires, the output current need reach 5V/2.5A
Dash Cam Hardwire Kit Specifications:
★ Output Connector: Type C USB plug, DC 5V/2.5A
★ Input: DC 12/24V
★ Cable Length: 11.5ft (3.5M, input 0.8 meter, output 2.7 meters)
★ Low Voltage Protection: When voltage lower than 11.6 V or 23.5 V, automatically cut off the power
★ Overtemperature protection (protection circuit over 130℃, return to normal when it drops to 90℃).
★ Reverse connect protection, Short circuit protection, Overload protection
A RED wire (BAT+), needs to connect with constant fuse, which can provide power to dash cam even when the vehicle is off.
A YELLOW wire (ACC), needs to connect with Fuse Box ACC, which can make the dash cam auto power on&off when the vehicle is on&off.
A BLACK wire (GND), needs to connect with metal bolt or screw, which can prevent electric shock.
NOTE:
The Parking Mode only works on dash cam that have the function of detecting ACC, this will make your camera record based on your camera’s parking mode setting.
Warm Tips:
If you don't have experience on installing the hardwire kits for the dash cam, please ask professional for help.
Always refer to the vehicle owner’s manual to avoid fuse slots that could pertain to important safety features within your vehicle. For example, avoid fuses that controls airbags, stability control programs, etc.