eBay

Woodpecker DTE Dental LED B 1S Curing Light Cure Lamp iLED Xlite2 ORTHO-BONDING

100% brand new and high quality!

Good price! High quality!

WOODPECKER LED.B:

Feature:
1. 100% guaranteed original Woodpecker. Each item has unique serial number, which indicate in which region it is supposed to be sold. Woodpecker is strict with that regulation of according regional sale. As ours are to be sold in China only, we have to erase it from item, which would cause scratch-like mark. That is no damage, pls note this clearly!

2. Wireless.
3. Time setting: 5s, 10s, 15s, 20s.
4. Large capacity battery. A full charge can be used for more than 500 times continuously under 10s working time mode.
5. Low standby power consumption with seventy days` standby time.
6. Constant light intensity. The solidification effect is not affected by the consumption of remaining power.

Technical Parameter
1. Power input: AC100V-240V 50Hz/60Hz
2. Light output: 1000mW/cm² -1200mW/cm²
3. Net weight: 145g
4. Dimensions: 260mm×31mm×34mm

LED B Packing List
1 X Curing light
1 X High capacitance rechargeable battery
1 X Charger
1 X Charger socket

*********************************************************************************************************************

LY-A180:

Classic rechargeable light curing unit: Environmental colorful plastic shell; Lotus charging pedestal; Handle can be placed horizontally / upright, to ensure that the light guide stick is not easy to break; 5W high power LED; High permeability rate of glass fiber-optic, strong, flashing, gradually strong 3 modes, large capacity lithium battery, automatic standby/shutdown, low battery warning, suitable for all brands of resin materials; long standby time of 90 days or more. Be charged one time, in accordance with each working time of 20 seconds, it can be used continuously for more than 130 times.

Operating mode diagram:
1. Power switch
2. Low battery alert
3. Strong mode indicator light
4. Flashing mode indicator light
5. Gradually strong mode indicator light
6. Mode select switch
7. Be adjusted in 5-40 seconds, shut down automatically . Without any operation in 20 seconds.

Technical data:
1. Package: 190×98×60m
2. Suitable temperature: 5~50
3. Solidify time and depth: 5s/3mm
4. Light wavelength: 420-480nm
5. Light intensity: 1200-2000mw/cm2
6. Gross Weight: 0.30Kg
7. Input Voltage: 110V-240VAC, 50-60Hz
8. Output Voltage: DC 4.2V
9. Battery: Lithium-ion battery
10. Capability of Battery: 2200mA

*********************************************************************************************************************

Xlite2 neo:

1. Light Source: Broad Band LED;
2. Wavelength Range: 385 - 515 nm;
3. Light Intensity: > 2300mW/cm²;
4. Battery: Lithium-ion battery (total running time when the battery is fully charged: at least 80 minutes);
5. Power Adapter Input Power: AC 100-240V 50 / 60Hz;
6. Charging time: about 45 minutes.
7. Size:Handle: Φ20 mm × 240 mm; Charging stand: Φ63 mm × 30 mm(all of the above are the largest size)
8. Weight: Handle: 96 grams; Charging seat: 99 grams;
9. Operating ambient temperature: + 10 - + 40(+ 50 °F - + 70°F);
10. Operating relative humidity: 30% - 75%;
11. Operating environment pressure: 700hPa - 1060hPa;
12. Color Choose: White/ Black Radomly color

Package Contents:
1 × host handle;
1 × charging base;
1 × power adapter;
1 × user manual.

Operation and function description:
The entire handle is only one button, light built-in button.
1. For the first time, charge the light curing handle first. Plug the USB
2. cable of the charger into the USB port of the power adapter, plug the power adapter into the power socket, and finally
Put the handle on the charging stand; or, insert the USB cable plug of the charging stand into the USB port of the computer, and then put
the handle on the charging stand. Charging instructions are as follows:
| Emerald Flashing | Battery charging;
| Emerald green light | battery fully charged; handle removed the
charging seat, the restoration of the previous working mode.
3. Working mode selection, by pressing the button for 2 seconds to
4. release to switch the working mode.
| Blinking Blue | Progressive mode, working time 10 seconds, light intensity 0-5 seconds from 0-1200mW / cm², 5-10 seconds 1200mW/cm².
| Solid blue | Fast mode, working time 3 seconds, light intensity 2300mW / cm ²
3. Turn the light curing lamp on and off, press the button briefly.
4. Switch machine, in standby mode, press the button a short time to open the instrument; stop any operation for 60 seconds, into the ultra-low power standby.

Package including: 1 Set ( radomly color)

*********************************************************************************************************************

DMX iLED (White/Black Optional):

Feature:

1. Light Source: Broad Band LED;

2. Wavelength Range: 385 - 515 nm;

3. Light Intensity: > 2300mW/cm²;

4. Battery: Lithium-ion battery (total running time when the battery is fully charged: at least 80 minutes);

5. Power Adapter Input Power: AC 100-240V 50 / 60Hz;

6. Charging time: about 45 minutes.

7. Size:Handle: Φ20 mm × 240 mm; Charging stand: Φ63 mm × 30 mm(all of the above are the largest size)

8. Weight: Handle: 96 grams; Charging seat: 99 grams;

9. Operating ambient temperature: + 10 - + 40(+ 50 °F - + 70°F);

10. Operating relative humidity: 30% - 75%;

11. Operating environment pressure: 700hPa - 1060hPa;

12. Color Choose: White/ Black choose the color you like

Package Contents:

1 × host handle;

1 × charging base;

1 × power adapter;

1 × user manual.

Operation and function description:

The entire handle is only one button, light built-in button.

1. For the first time, charge the light curing handle first. Plug the USB

2. cable of the charger into the USB port of the power adapter, plug the power adapter into the power socket, and finally

Put the handle on the charging stand; or, insert the USB cable plug of the charging stand into the USB port of the computer, and then put

the handle on the charging stand. Charging instructions are as follows:

| Emerald Flashing | Battery charging;

| Emerald green light | battery fully charged; handle removed the

charging seat, the restoration of the previous working mode.

3. Working mode selection, by pressing the button for 2 seconds to

4. release to switch the working mode.

| Blinking Blue | Progressive mode, working time 10 seconds, light intensity 0-5 seconds from 0-1200mW / cm², 5-10 seconds 1200mW/cm².

| Solid blue | Fast mode, working time 3 seconds, light intensity 2300mW / cm ²

3. Turn the light curing lamp on and off, press the button briefly.

4. Switch machine, in standby mode, press the button a short time to open the instrument; stop any operation for 60 seconds, into the ultra-low power standby.

*********************************************************************************************************************

2001B:

Specifications:
Light Density ≥2700mW/cm
Battery 3500mAH
Input Voltage :AC100-240
Power: 12W
Wavelength400nm - 490nm

Features:
1. Lithium battery
2. Pure LED blue light and no flicker
3. Aluminium body
4. 3 second can make it! (selection from 2-6 seconds)

Package
1. Light guide
2. Circular eye-protector
3. power adapter
4. Charging base
5. Main body
6. Manual

*********************************************************************************************************************

DMX iLED:

1.INTRODUCTION
This product is used in fast solidification by lighting dental resin. It is a new generation of standard developed LED curing light, with humanity intelligent chip, the world advanced high intensity LED light and Li-on rechargeable battery. It can cure all the dental resin in the market nowadays,

2.PACKING LIST
Main Body: 1Pc    Light Source:: 1Pc
Charge Base: 1Pc    Adapter: 1Pc
USB cable: 1Pc Light Protect: 1Pc
Lens: 5pcs                     Test block:2pcs

3.TECHNICALPARAMETERS
3.1 Main Unit

Battery Voltage DC3.7V
Battery Capacity 1500mAh
Wave Length 385515nm
Light Density P1(9W) ≥ 2300mmw/cm²
P25W≥1200mw/cm²
Charging time 3 hours approx
Weight 550g
Packing size L205 x W109 x H77mm

3.2AC Adapter
Rated input voltage AC100-240V 50/60Hz
Output voltage DC 5V/MICRO USB
Output current 1A

3.3 Operation Conditions

Environment temperature +5 ~+40
Relative humidity 10%~80%RH
Atmospheric pressure 50~106KPa

4.Use Method
4.1 Charge
Put the curing light into the charger base, the blue light is shining one by one. When it is done, all of the blue lights are on.It takes about 3hours. Take care not to charge more than 7hours. Remove the adapter from the power supply after charging.
Note: Can charge with the main unit socket also. When charging, theLED screen show CH; when done, the LED show FU

4.2 Operation Instruction
4.2.1Press M orTbutton to power on.Ifpress ON/OFF button, will light the Light source.
4.2.2 Set up Mode:

P1(9W,≥2300mw/cm²) The actual measured value 2800mw/cm²
P25W≥1200mw/cm²

4.2.3 Setup Time:P1--1/3/5s
                        P2--6/10/15/20s
4.2.4Press ON/OFF button to light on the LED curing light. Ifsome wrong happened, the LED screen shows Er.
4.2.5 The main unit will power off by itselfif without any operation about 2minuts.

Caution: the curing light can not be pointed at the patient's eyes while it is operating. If any accidents happen, go to the hospital immediately

5.Precautions
5.1 This machine is precise opticalequipment,it should use in the clean and dry place.
5.2 Remove adapter from the power supply after charge. 5.3 Do not touch the battery electrodes by any metal objects.
6.Cleaning & Sterilization
6.1 Clean
Wipe the main unit with neutral detergent if needed.

6.2 Sterilization
6.2.1 The light source can be high pressure autoclaved. Autoclave it after each use with seal bag.
6.2.2Don't autoclave any parts(the main unit and charging base)other than those that can be subjected to autoclave sterilization.
6.2.3 Autoclave up to a max.135. It's recommended to autoclave for 20min at 121 or 15 min at 132.
Notice: Don't use any solvent such as benzine and thinner for sterilization.
7.Transportation And Storage
1)Lay lightly during transportation, avoid strong shake 2) Storage condition:
a. Ambiance temperature:-10~40b.Relative humidity:≤85%
8.Disposing product
Please consult with dealer from whom you purchased it about waster despoil.
9.Warranty
Manufacturer warrants its products to the original purchaser against defects in material and workmanship under normal practices of installation, use and servicing. This unit is guaranteed for its designated use against original defects in materials and workmanship for a period of 12 months from date of purchasing.

*********************************************************************************************************************

LY-C240:

Feature:

1.Super 10W high power LED bulb.
2.360° rotating light source, 90° right angle illumination.
3.The 3 mm resin can be cured by strong light for 1 second, and the light intensity is greater than 2000 mw/cm2
4.The outer casing is made of environmentally friendly plastic material, which is beautiful and practical.
5.Strong light, pulse, fade-on three working mode selection, 1~40 seconds working time.

Parameters:
Packing specification:10.25*6.5*2.56in
Net Weight:26.1 oz
Gross Weight:28.2oz
Output voltage:110v-220VAC, 50-60HZ
Output voltage:DC5V
Battery: Lithium ion battery
Capability of battery:2200mah
Battery voltage:3.7V
Suitable temperature:5°~50°C
Relative humidity:≤80%
Solidify time and depth:1s/3mm
Light wavelength:420-480nm
Light intensity:2100 mw/cm2

Package Included:
Subject*1
Power adapter*1
Charging base*1
Instruction manual*1

*********************************************************************************************************************

LY B200-B:

Cure Light covered by ABS painting
5W big power LED Cure Light
High articulation optical fiber
Cure Lamp Working models:strong
Automatic standby and shut down
Low Battery alert
Large-capacity lithium battery
Wireless curing lamp Solidify all brands of resin materials

Technology data:
Capacity of battery:2200mA/h3.7v
Working voltage : AC100-240V 50-60Hz
Wavelength: 420-480 nm
Light power: more than 1500mw/cm2
Solidification time and depth: 5s/3mm

*********************************************************************************************************************

EXP:12 month or better

Light-Cure

Specifications:

Ortho-Bonding primer and adhesive contains acrylate monomers. Acrylate monomers are known to produce allergic skin reactions in certain sensitive individuals. May cause eye and skin irritation.

Precautions: A void eye and skin contact. Wear gloves when handing this material.

Precaution:Please follow manufacturer's directions on the handing, proper use and recommendations for eye protection, when using a curing light

This system is designed to be used at room temperature (20-25°C, 68-77°F)Storage between 2-27°C/35-80°F Light Sensitive

Contents:

3 x Adhesive paste Syringes (10.5g)

1 x Primer Bottle (8ml)

40 x Brushes

1 x Instruction Booklet

*********************************************************************************************************************

EXP:12 month or better

Self-Cure

Specifications:

1. This product is one kind of orthodontic direct bonding system resin with aromatic bis dimethyl acrylate resin as its main material.

2. As a new-type orthodontic direct bonding system, it is convenient to use with little waste, easy to handle independently and has a favorable clinical bonding strength.

3. It consists of primer and paste with acid etchant, spatulas and small brusher as its accessories.

Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolate tooth and blow-dry.

Etching:Etching the enamel of the tooth with acid etchant for 50 or 60 sec. Rinse and dry with clean air. If the enamel does not have a chalky appearance, pls. repeat the process;

Brushing: apply a thin layer of the primer over the etched enamel with the brusher;

Packaging Detail

1 x bottle10mlPrimer

1 x Syringes (3.5g each)Paste

1x Syringes (2.5ml)etchant Gel

Assories , instructions

STORAGE: Store at 25 or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use!

Production Display：

FDA Statement

The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.

Seller name: DMX

City,Beijing,China

Feedback

We commited ourselfs to your 100% satisfaction both with our goods and services.

? Please leave me FIVE star POSITIVE feedback if you are satisfied with our items.

? Please CONTACT me immediately before leave us neutral feedback or negtive feedback, We will try our best to resolve any problem for you untill you are satisfied.

Shipping

1. We will send out your orders in one to two day as soon as we receive your payment.
2. Delivery ways: DHL, YANWEN, EMS, USPS, China POST,etc.
3. Delivery time:10-15 days to USA,

20-30 days to UK, Germany, French, Australia, Canada, etc, Over 30 days to other countries.

Returns

If the item you received is damaged or defective,Please contact us immidately.We will free exchange or refund.

We will pay the return shipping costs if the product is defective or the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping charges.

You can return your purchase for up to 30 days from the date of delivery. No refund will be issued if the product shows signs of use. Returned package must be in the original packaging, everything must be in new condition, No missing parts.

Our guarantee does not cover accidental damage or wear of product caused by customer.Thank you very much for your understanding!

We're one of the larger online dental suppliers based on many qualified manufacturers in china.

If you contact us immediately after placing the order, we will make every effort to assist you with your change request. Unfortunately, we can not make changes or cancel an order once it has shipped.
Any help,need or questions, please do not hesitate to contact us. Looking forward to our friendly & win-win cooperation!